Reviews
It is heavy and goes easily into the Screw hole.
I had an Allen Wrench made by a manufacturer at home for a long time, but it had rust on it extensively and the hexagonal screw was going to be damaged every time I used it on my motorcycle because of the sharp hexagonal point on the end of it.
[How is it used?
Various sizes of hex bars are available in Quantities:The set is widely compatible with Motorcycle's hexagon socket screws.
Was the one you received as per Image?
It has a high quality feel as shown in the image and looks scratch resistant due to its dull luster.
How was your experience with it?
There is almost no rattling even if the screw is moved after insertion, and it seems that the screw hole will not be violated. There is also a ball point on the screw that allows for quick turning of the screw once loosened.
[Points to note]
As mentioned in the manufacturer's note, it is better not to use it on the ball point where high torque is applied. When using it, it is recommended to use it for fast turning instead of tightening the screw.
How did it compare to other products?
Compared to the non-Manufacturer products we have had in our house for a long time, the precision, weight, and ease of use of these products are all far superior.
Although the regular Allen Wrench without ball point is also available, we recommend this product because it is more convenient and can be turned quickly, even if you have to spend a little more money.
View detail
Castings, good stuff (cold! (Gobble!)
I was heartbroken by the DAYTONA product, so I hung on to KTC.
Although the company is an expensive Image, we were able to purchase the product at a reasonable price, perhaps benefiting from the Large volume production.
The DAYTONA-made steel plates were thin and expanded when Torque was applied, but the KTC-made plates were made of heavy cast metal.
It fit tightly into the OEMFilter and loosened easily.
I had a terrible prejudice against cast metal as cheap, but my view has changed 180 degrees.
Quality and Rigidity. Come to think of it, Wheel was Casting too....
View detail
KITACO JET Driver
About quality and texture There are all the tools for setting up pe24 About the feeling of use However, my hands hurt when I tried to use the + driver with my bare hands without wearing gloves Products to buy together all in one product Difficulty of installation It's good to use for setting Cost performance and comparison with other products The price of this product is good and the portability is really good, so I recommend it! About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing I needed a simple tool to carry around, but it's a well-made product and it's reasonable price As I mentioned above, my hands can hurt with my bare hands, so I recommend wearing gloves and setting them View detail
cheap
It works fine
It's not much of a turnout, but it can be used for 3Pattern and the price is very reasonable.
Too easy.
I tried to get them in Knipec Fat.
I decided to go with this one because it's more expensive.
I'm satisfied
Recommended items
View detail
it is normal
I bought it to use when I want to remove it with a little force.
There are no special features, but they are usable as usual.
View detail
Love this for my bikes plugs!
I haven't bought a gap tools for over years. Turns out mine were all too big. This fills the bill being light and easy to use.Handy tool to have in your moto box. Well made, durable, works as it should, and looks cool as well! No complaints here.I use it more to open a nice cold adult beverage than i do for gapping spark plugs, but it works great for both! View detail
Unusual thin Combination wrench
This is a thin Combination wrench from KTC, the Japanese Standard for tools.
As the name suggests, it is MAJORItems for bicyclists, and Amaz*n or something like that, there are a lot of reviews that seem to be cyclist-list.
Basically, it is a Spanner that can access areas that are too thick for normal Spanner to access.
It was 10mm wide on two sides and the thickness of the Spanner section was 3mm.
Generally, this type of thin-walled item is simply lineuped as a Spanner, but this product is a Combination wrench.
Note that the Glasses side is not thin-lipped.
For this reason, I think it is not impossible to use it as an alternative to the normal Combination wrench if you pay attention to the concerns when using it on high Torque areas.
Also, many Thin Open Wrenches have a rough finish due to the base punched out of the plate gold, but this product, as one would expect from KTC, has a normal finish on the spanner section. It is not particularly excellent, but it is not bad at all.
The only thing that I personally think is not good enough, although it is just a preference, is the design of the cherry blossoms.
It doesn't make any functional sense. (It's more likely that dirt will accumulate in the hollows.) I was not attracted to Design.
I want my tools to have functional beauty. It is completely my personal taste.
It is a rare combination wrench as a Thin Open Wrench, so it is the best candidate if you are particular about Glasses.
It is also a product that can be recommended in general because it is definitely a thing.
View detail
Standard products in Eyelet Punch
Purchased to create a hole for Carabiner on Baseball cap to be used when getting off Motorcycle. It expands the range of carrying options.
The product feels solid and usable, and there are no problems. The product comes with an eyelet, so it can be used right away.
It is also reasonably priced, so you can use it in various ways if you have one.
View detail
Solid Filter wrench
Used in GSX-R1000R 2019
Size66.5 corresponds to SEA BASSOEM's Cup type Oil filter.
SEA BASS cars, in general, have oil filters that are specified to be tightened stiffly.
It is 720 degrees from seating, not Torque indication.
If you use a filter wrench that is not accurate enough, you will get a "slippery" result.
Once it is wet, it is no longer good.
You will have to struggle to remove it with that kind of parpray.
I have been using SEA BASSOEM's Filter wrench for about 8 years now.
Some overuse over the years. (?) I guess my addiction has become too much for me, but the other day I finally got it.
When it came to removing the naff Oil Filter, it was a Large strange thought.
So, we purchased this product instead.
Compared to SEA BASSOEM, the range of the surface is deeper, or perhaps the Fit feeling when fitted to the Filter is better here.
The thickness of the wrench is also thicker, and the inner shape is more precise, so I think it will last longer.
Note that the hexagonal part that pops out has a two-sided width of 24mm and SEA BASSOEM (17mm) The size is considerably larger than the
Basically, the drain bolt on SEA BASS cars is 17mm wide on two sides, so the OEM product is very easy to work with in terms of its wrench.
However, this product is not exclusive to SEA BASS, so it cannot be helped.
Ratchetetc. will require ridiculously large Glasses when used with models that are strictly height-oriented, so be prepared for that.
If not, a 9.5sq Ratchet can be used.
In addition, it is necessary to carefully examine the oil filter to be used and to observe the torque for tightening.
The wide range of size lineups makes it a good choice for those who want a filter wrench.
View detail
Combination wrench for professionals
Ask any tool swamp dweller what”combination wrench they”d like to see, and the Stahlwille 14Series comes to mind. The Stahlwille 14Series is the one that comes to mind when you ask the residents of Tool Swamp what they think of”Combination wrench.
In terms of appearance, it is a higher-priced product with a pear finish, as opposed to Snap on and Nepros, which are higher-priced products with a mirror finish.
(As expected, it is cheaper than Snap on and Nepros.)
You will not see this in Home center or other places.
It is not as well-known as Snap on or Nepros, and its pear-shaped surface is not as glamorous.
However, it is a product that shines with its individuality backed up by its functionality, such as the feel of elasticity caused by the difference in materials, the difference in Spanner shape caused by the difference in design concept, and the Offset Glasses, which is rare for Combination wrench.
This is a good thing, because it gives a sense of being a professional.
(In fact, I hear it's accepted by Gen.)
Personally, in considering a replacement from KTC's StandardLine, I came to this product because I dislike the mirror finish.
I actually bought it and used it, and my impression is that it is
The bending feeling is definitely unique and uncomfortable until you get used to it.
Spanner is thicker, so you'll want a separate Thin Open Wrench.
Glasses are slightly different from ordinary combination wrench due to the combination of offset, neck angle, and thickness.
So, to be honest, it took some getting used to & it seemed to be a matter of taste.
I will use it as is for a while and if I like it, good, if not, I will sell it and replace it.
(High-end tools should be able to do this)
View detail
1 pc is required.
I am satisfied with JAPAN and the finish is good and Large. View detail
Efficiency of tinkering with old cars
I have been tinkering with my car for over 30 years. Sometimes I have a stuck Screw that I can hit with the Hammer without having to switch to the Impact Driver. It is very convenient. View detail
Switch and volume of electronic devices, etc.
It is a MONKEY Wrench, but it is made with a very thin tip.
The basic usage is similar to that of the MONKEY Wrench, but the supplemented design allows tightening even in places where there are other objects just above the occupied portion.
The parts where this would come alive would be the parts that are held in place by thin nut, such as the SwitchBody mounting area.
With Motorcycle, I can't think of many places to utilize it.
In my case, I use it for electronic work as a hobby and for tightening radio golds at work, etc.
It is not used that often.
Normally, I would use a regular MONKEY, and I think it would be convenient, but I don't think it is worth the effort.
View detail
Great value - Must have for blind bearings
A must-have for double-blind bearings that you need to remove for engine overhaul.It worked great in the blind transmission bearing. It didn't work for some jammed swing bearings, but the collet kept its grip until the bearing seat began to twist. It's not the fault of the tool, it's a testament to how tight these races are.When your bearings need replacing, this bearing remover hits the bearing so evenly that it takes very little effort to use. I would use brass rods and hammer around the bed to get it out and sometimes that just wouldn't work. But that means you slide, compress, and quickly shift the weight up to push the mattress out. This is one of my most appreciated tools. And the protools price surpasses other competing products that appear to be of similar quality. I had no issues with this tool. It probably even works on my bike beds. View detail
Must-have for regular spoke maintenance
Checking and tightening your spokes is important yet frequently neglected. Throw this in your cart and check the spokes before every ride for your safety and the longevity of your wheels.Finally caught these in stock. There is a reason for this demand. It fits any spoke you may have without having to change tips..a great tool for your toolbox. works pretty well and is small enough to keep in your pack.not as good as designated sized spoke tools, but it works and is well built. View detail
TGRNippleTorque wrench
It fits Nipple and is very easy to use. View detail
Polishing
I bought it before as a trial and it was so good to use that I bought more.
Compact and easy to use with short branches.
It is useful to carry it with the loading tools so that you can polish the Plug when the need arises.
View detail
I didn't use it except when I thought I would...
If you had it, you'd use it!" I bought it, but did not have the opportunity to use it as much as I thought I would.
I used it when I was taking apart a carburetor with a broken cook on a SPADA fuel tank, but to put it another way, that was the only opportunity I had...
It's a good tool to use, but...
View detail
For maintenance.
It was good because it was easy to use for maintenance and servicing and the types of products were well used. View detail
You could have at least one.
I thought that all Ratchet Handlebars are not that great, but KTC's Ratchet moves smoothly.
I would say it has more of a muffled or muffled feeling.
I bought it because I thought the quality was worth the price and that I could have at least one in this price range, and I'm glad I did.
I knew that Home center tools are different from a good brand. (Don't mention that they are sold at Home center, too...)
View detail