Reviews
The person who had better than nothing is absolutely good!
MOTO GUZZI - We installed in V7Classic. Since Space under Seat is Small and Body of separate ETC has already been set up, I was a little worried but installed the Body at a slight space at the top of the Right of the Air Cleaner Box and installed it.
You can adjust the sensitivity in 3 steps, the best sensitivity is to grasp the Grip and Alarm sounded just a slight shake. Large A clear and clear sound is heard so it is a powerful Items for crime prevention measures!
But, personally, the sound "Pi!" It is not "Kyun!" Ya "Pyu!" I prefer it.
View detail
For threatening purposes only
I bought this item because my motorcycle has no crime prevention function at all. I think that installation is easy if it is well maintained. Also, if you purchase at the moment, it is not a Screw type LED indicator like the one in the image but it is a Paste Type LED indicator so we asked if you purchased it after confirming the installation location. Bullet Terminal is used to connect each part but because it is not Waterproof, it is safer to buy a compressed Tube as well. View detail
SUZUKIOEM and Trade
I used a secure OEM, but I am too obtuse, so try it out.
It seems to be 3G sensing, Alarm sounds when there is a change in Set position Spec..
Although it is nonresponsive to fine vibrations, it is not responsive to earthquakes and strong winds
Considering that there is no false alarm, Spec. It will be a street..
Ringing up when lifting the car body with Side Stand hanging.
Gently did not ring with Center Stand release.
It is sensitive to tilt, but it will take some margin against vibration.
However, the OEM did not ring unless it moved considerably
In terms of sensitivity this is the top.
The part that you feel as a fault
- LED is too dark, Large rinse. Harness too short.
- Since each Harness is not protected, protection processing is essential.
- AlarmUnit feels like non-Waterproof.
I'm likely to pick up an installation location.
OEM can not start engine by Prank Spec. but,
The sensitivity of this may be more useful for crime prevention.
Set procedure, the sensitivity here is warrior.
View detail
Burglar alarm for Motorcycle
As a countermeasure against theft of MONKEY, I searched variously, I decided on this product with reference to Impre. Installation is easy if the position is decided. Although the previous one seems to have a vibration sensor, since the current thing is only 3G sensor, it seems to be ineffective for parts theft, but the response of Sensor is good, the sound is also quite large Large antitheft effect is I think that there is.
Set the alarm, do not do, but I thought that it was easy to do it freely.
View detail
I'm installing it now..
I opened it to install it, but look at the Instruction Manual "Is it impossible for me?" And I think that I would like to ask a contractor. For those who can install it yourself, I think Gold is also reasonable with Reasonable. It seems that the labor cost is high. View detail
It is a fair response and good reaction ~
Sensor's response is also nice.
It is easy and easy to install NAKED.
Installation work is about 30 minutes to 1 hour.
It is convenient because you can set by just turning ON and OFF the key.
View detail
It was a satisfactory product.Attachment was also easy and the electric amateur's one has also attached it in about 30 minutes.I think that sensitivity adjustment is just performed if it can do since malfunction by a strong wind takes place occasionally.
It was a satisfactory product.Attachment was also easy and the electric amateur's one has also attached it in about 30 minutes.I think that sensitivity adjustment is just performed if it can do since malfunction by a strong wind takes place occasionally. View detail
Since the talk of Z system theft was heard well recently, it purchased.I think that attachment is also easy and a theft deterrent effect is large.The place which it is [ place ] only the way of ON/OFF of pure key, and has ON/OFF of a Security
Since the talk of Z system theft was heard well recently, it purchased.I think that
attachment is also easy and a theft deterrent effect is large.The place which it is [ place ] only the way of ON/OFF of
pure key, and has
ON/OFF of a Security switched is a favorite.There also seems to be little battery consumption at the time of
standby.
Although the main part was installed in
Tail cowl, the flashing lamp under
Security operation did not reach the circumference of a Handle in that case.Wiring should just have excelled 30 more cm! Since it will
Become a nuisance to the neighbors if it sounds at night since sound is loud more than it considered, cautions are required.
View detail
Although it was the first burglar alarm, attachment was easy and introduction of it was completed easily. Although it is if unwilling since something and the unsafe talk are also heard, a required thing is considered, and comprehensive evaluation purc
Although it was the first burglar alarm, attachment was easy and introduction of it was completed easily.
Although it is if unwilling since something and the unsafe talk are also heard, a required thing is considered, and comprehensive evaluation purchases this high product.For the moment [
], there is also no malfunction, and it is moving firmly.
View detail
[webike] ON/OFF of the Monitor Alarm thinks that it is good to be able to do at a Main key. Although I think that it is good as a tamper-proof intimidation effect, when hanging a strong wind (typhoon average) and a sheet for high sensitivity, i
[webike] ON/OFF of the Monitor
Alarm thinks that it is good to be able to do at a Main key.
Although I think that it is good as a tamper-proof intimidation effect, when hanging a strong wind (typhoon average) and a sheet for high sensitivity, it is also slightly regrettable that having hit just for a moment reacts.
View detail
If a main part is not separated very well from a Siren although he would like to install in the place which does not require water, vibration of a Siren will be perceived and a Siren will begin to keep sounding. A device is required when the Space to att
If a main part is not separated very well from a Siren although he would like to install in the place which does not require water, vibration of a Siren will be perceived and a Siren will begin to keep sounding.
A device is required when the Space to attach is narrow.
Since ON of an alarm and OFF can be performed with the key of a Motorcycle, they are easy.
An effect expects the
warning sound from mischievous, quite large deterrence.
View detail
Although the Motorcycle alarm was looked for, as for that of a Manufacturer of what, most has much Set with the REMOTE CONTROLLER. It was easy to make けど REMOTE-CONTROLLER て there be nothing, and CS-550M was found when what can be set only by the key of
Although the Motorcycle alarm was looked for, as for that of a Manufacturer of what, most has much Set with the REMOTE CONTROLLER.
It was easy to make けど REMOTE-CONTROLLER て there be nothing, and CS-550M was found when what can be set only by the key of a Motorcycle was looked for, since it was not water proof correspondence.
(although it is a digression)
Since a Pairing must be carried out one by one if battery exchange is carried out although the Gorilla cycle alarm was used before.
There are the circumstances yielded to the friend.
Since it is comparatively compact, the
power source (although it is not water proof ...) which can be installed should always secure only a power source and + power source at the time of Ignition ON anywhere.
setting out is also easy, and although it seems to be better to install a main part as horizontally as possible, since there was no completely level position when it was my Motorcycle, a label surface is suitable only by making it come upwards.
operation start acknowledgement sounds ? are デカイ.
It is surprised just for a moment.
Watch sound is also 122 dB and remarkable sound volume again.
The
guard set should only turn OFF a key at the time of un-using it only by carrying out OFF-ON-OFF of a key within 5 seconds.
That it is not awesome needs to make a hole in a Body with a LED lamp of operation, or it needs to make a Lamp holder from a Stay etc. separately.
I think that it is not necessary to attach it since operation is possible even if there is nothing.
View detail
It can install without being conspicuous also under the sheet of a MONKEY, since it is compact. It is also useful that it can set by an Ignition key. Since sound sounds when setting to a standby state, the point to worry cares about the circumference fo
It can install without being conspicuous also under the sheet of a MONKEY, since it is compact. It is also useful that it can set by an Ignition key. Since sound sounds when setting to a standby state, the point to worry cares about the circumference for a while. View detail
Fits: YAMAHA MAJESTY250 [MAJESTY]., YAMAHA MAJESTY250 [MAJESTY]., YAMAHA MAJESTY250 [MAJESTY]., YAMAHA MAJESTY250 [MAJESTY]., YAMAHA MAJESTY250 [MAJESTY]., YAMAHA MAJESTY250 [MAJESTY]., YAMAHA MAJESTY250 [MAJESTY].
setting out of sensitivity -- although it is quite puzzling, since the LED lamp is also attached, it is easy to carry out a check. I think that three steps of sensitivity can be evaluated as it is. The last impression was a mistake.
setting out of sensitivity -- although it is quite puzzling, since the LED lamp is also attached, it is easy to carry out a check.
I think that three steps of sensitivity can be evaluated as it is.
The last impression was a mistake.
View detail