Reviews
I lost it, so...
22.I lost my ClampSpacer for 2mm, so I bought Repair Parts.
Only Repair Parts can be purchased for fragile parts, so they can be used for a long time.
View detail
It can be used with a turnstile.
I bought this to attach my old Porch and Smartphone Case to my Scooter.
As others have stated in their reviews, it rotates when installing the Porch and other parts.
I solved the problem by adding a Nut to stop the loosening.
Because of its high quality, the appearance of the product without Porch and other products is not bad.
View detail
Easy to use
[How is it used?
I chose to install a new Smartphone Holder on my TouringMotorcycle and ultimately ended up with this product.
Anything as long as it's cheap!" I am very happy to be able to do this, And not too much of Plastic's cheap stuff, either." For me, I'm a bit of an either/or kind of guy. That's it! It seemed like a good idea.
Also, my phone has many buttons on the Right side, so I could not use the type that is inserted from the side, so I chose the type that is fixed at the four corners.
Was the one you received as per Image?
I chose Black and it was just like the Image.
How was your experience with it?
First of all, the Included Parts:are substantial for the price.
There is a diameter conversion rubberretc.Pattern and it is not difficult to install.
When the middle Button is pressed, the four corners are Fit to the phone.
Release is Quantity:Pair (for Left and Right) The only thing you need to do is to press the "+" and "-" prongs, so everything can be done with one hand while doing Gloves, which is easy.
[Points to note]
Make sure it is firmly secured before starting.
How did it compare to other products?
I had been using Chinese several hundred yen ones, but I felt they were well thought out with good strength and ease of use.
【Review】
I used to think that KaEdia was cheap or bad, but when I bought it this time, I got a good impression of Included Parts:, usability, etc.
As a smartphone mount, I have no complaints.
View detail
Easy.
Large is just right.
I change equipment from time to time, and it is useful because I can exchange it easily.
View detail
Fits: SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14)
On Stem Mount
[How is it used?
GSX-R600 (K6) I purchased this product to install DAYTONA's Multi Bar on my
The compatibility list said that the model year was 2008 or later, but I measured the diameter on the actual vehicle and confirmed that there was no problem, so I chose this model.
Was the one you received as per Image?
I had bought other Sizes before, so it was as per Image.
How was your experience with it?
I confirmed beforehand that Size was fine, so of course I could use it.
Simply put it through the Mount on the Multi Bar, put it in the Stem Nut, and then tighten the Bolt.
Multi Bar could be fixed Firmly.
[Points to note]
It is recommended to measure the diameter of your motorcycle in advance as well as the fit.
How did it compare to other products?
I chose DAYTONA because it was troublesome to check the compatibility with Multi Bar or the hole diameter, etc.
Depending on the price, a cheap No Brand product would be fine.
【Review】
You can easily fix the Multi Bar to the Stem.
It is recommended to measure the inside diameter of your car's Stem to be sure.
View detail
Touch screen is slow to respond. Instruction Manual is too easy.
The instruction manual only describes it roughly, so you have to learn how to use it by hand. Except for disassembling the bike, wiring is not difficult with color-coded connectors. However, since the connectors for the front and rear cameras are the same color, it is recommended to temporarily turn on the power in the middle of the installation (since the rear camera has a reversing function). If you are concerned about the dark current, the instructions say to connect both ACC and constant power to ACC, but I connected ACC and constant separately because I was concerned about the inability to use the parking monitoring function and the time gap. If you use your motorcycle infrequently and are concerned about battery drain, it is better to use only the ACC connection for constant and ACC. As mentioned in the title, the response of the touch screen is sluggish. It is frustrating with gloves on. There is no automatic screen illumination adjustment (I always use max except at night). The smartphone app is supposed to be able to connect to the driver's recorder, but I don't know the password, so I still can't use it. The home button on the map screen is annoying. View detail
For the use of Income.
I have been using a btx2 pro s with a SZ-RAM4 and bought it with Speaker so that I could use it with my new SHOEI Z-8. I was so attached to the SZ-RAM4 that I couldn't bear to retire it, and since I would likely want to use Jet in the hotter months, I decided to keep it too. I decided to keep it, and the question arose as to what to do with Income.
When using Income, the Microphone is available in Included Parts:for full face, and it is sufficient to use the unused one in Included Parts:for the mounting Clamp, but the Speaker and SlideMount need to be replaced or newly prepared each time they are used. However, the Speaker and SlideMount need to be replaced or newly prepared each time they are used.
I thought about changing the Speaker and SlideMount for each season, but I decided to purchase the Speaker and SlideMount because it is troublesome to take off the interior and put on and off each time, and if I just attach the Body, I can use different Helmets depending on my mood. I decided to purchase a Speaker and a SlideMount.
For installation, we decided to use double-sided tape to attach the outside of the clamp, which was not used in the Included Parts:section, to the helmet, but the SlideMount, which we purchased additionally, does not come with two screws to fasten it to the clamp, We had to think of a way to fix it to the Clamp. At first, I was thinking of using one screw for each SZ-RAM4 and Z-8, but I didn't want to damage the screws by applying excessive force, so I decided to prepare screws. However, this was not the Size sold around the corner. I had to buy a clamp to attach the screws, and it cost about 2,000 yen for two small screws. I had no choice but to use the regular screws for the Z-8, and for the SZ-RAM4, which is likely to be used less frequently, I removed the Clamp once, removed the Screw holder from the Clamp, and fixed the SlideMount to the Clamp with 2.5mm diameter Screws and Nut to make it ready to be used. The Clamp was removed and the Screw holder was removed from the Clamp.
As for the wiring, in the SZ-RAM4, the wires were placed inside the helmet, crossing the edge of the helmet, so it was necessary to protect the wiring from damage when the helmet was placed on the ground, etc. In the Z-8, the wiring could be pulled inside the helmet without passing through the point where it hits the ground, etc., so no protection was needed. However, with the Z-8, it was possible to pull the wiring inward without passing through the point where it hits the ground, so no protection was needed, and the wiring was well concealed, making it look very refreshing.
After installation, it works fine and I can now use Income on my Z-8. For this gold price, I would like to see at least a Screw included in the kit.
View detail
For the use of Income.
I am using btx2 pro s with SZ-RAM4 and bought it with Mount to be able to use it with my new SHOEI Z-8.
SZ-RAM4 has been in use for about 8 years, and it was time to retire it, but we decided to keep it because we were attached to it and could not bear to throw it away, and also because we would want to use Jet in the hot season.
In order to use the Income, the Microphone is available in the Included Parts:for full face, and it is sufficient to use the unused one in the Included Parts:for the Mount, but the Speaker and SlideMount need to be replaced each time they are used or prepared anew. Speaker is attached with Magic tape, and there is a spare tape included, so I thought about changing it every season, but later I thought it would be too much trouble and I might leave it on one side or the other.
The Z-8 has a recess for mounting the Speaker and a cutout to release the Wiring, kindly designed with Income mounting in mind.
The recess for mounting the speaker has a diameter of more than 40mm, and this C1294.10 would have fit just fine if it were a normal round type, but since the body is egg-shaped, it was a shame. By the way, it did not fit into the recess, and the One Side floated. It doesn't hit my ear and Magic tape seems not to come off easily because it is half attached, so I will use it as it is for now.
The sound level is sufficient for listening to music while riding a motorcycle. I was not dissatisfied with the sound of the SZ-RAM4 I had been using, but with the new Z-8, perhaps because the speaker is closer to my ear than with the SZ-RAM4, I feel that the volume is larger and the wind cutting sound is less and much quieter, so the sound has been improved. I felt that the sound was better.
I can't wait to go touring with my new Helmet.
View detail
Depends on the use of Main.
I purchased Mirror as Main, which is easy to see during the day.
I bought this one considering the cosmetics including Included Parts:because it was difficult to see the screen in Situation where the sun shines during the daytime with my previous driver's recorder with Monitor.
The screen visibility is not as good as the Tanax SMARTRideMonitor installed on Main's Motorcycle, but if you don't compare it to the Tanax SMARTRideMonitor, you can see the screen even in daylight at a perfectly acceptable level.
In terms of the total price including the Air Pressure Monitor, I think it is a totally reasonable price.
I use it in car play, but when I want to use it in Camera screen, it tries to switch to car play by itself, so I have to operate it each time to switch the screen back.
I would appreciate it if this is fixed in a future version up, but I have no problem using it as a SMARTMonitor.
But overall satisfaction is very good.
If you are hesitant about Tanax because of the price, I totally recommend it. Quantity with the same content:Set is almost half the price, lol.
View detail
For ETCBody protection
I had it installed at the shop at the same time as the ETCSetup and Body installation prior to delivery.
I thought the OEMOption would be sufficient for the quality of the product.
I am satisfied that it fits under Seat and Beauty.
View detail
Difficult to understand the settings
It does not include a detailed instruction manual, which is a problem when it is not connected to a smartphone.
I set it up while emailing Manufacturer.
Since the Instruction Manual is the same as the Instruction Manual that comes with the DriveRecorder, it is difficult to understand whether it is not displayed due to a defect or whether it was not displayed in the first place.
View detail
Circuit Running
I bought this for a Circuit run.
As others have written, the Sensor portion of the
I am at a loss to install it.
Installation location, installation bracket, etc. are time-consuming.
It will take
You must be able to tinker with Motorcycle in a certain way.
Installation may be tough.
View detail
Fits: YAMAHA YZF-R25, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA MT-09, YAMAHA MT-09, YAMAHA XSR900, Others , YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA XSR900, YAMAHA SCR950, YAMAHA NIKEN, YAMAHA NIKEN GT, YAMAHA TRACER GT, YAMAHA MT-09, YAMAHA MT-07, YAMAHA MT-03, YAMAHA XMAX, YAMAHA YZF-R15, YAMAHA YZF-R125
Y'S GEAR ETC Pouch3
The double-sided tape is used to attach the Magic tape, which has a very good adhesive. Unfortunately, the hole for the WiringCable is too large, so it is best to install the WiringCable together with the ETC when installing the ETC. View detail
SHOEIHelmet changed from X14 to X15
I purchased a new bracket for my helmet because I changed my SHOEIHelmet from X14 to X15 (see photo). This manufacturer has a reliable supply support system, even down to the smallest parts. View detail
SS is difficult to find a place to install
I had not been able to find a place to install the Body, so I left it for a while, but then I got up the nerve and started installing it. (This is the first time for me to install the driver's recorder on a motorcycle.)
Others have it tucked under the RearSeat but I have moved the ETC there so I can't install it.
In the end, the bracket was made to fit under the front seat.
This is because the 22SeriesBody's small type contributes to the large size, and it would have been difficult to fit it neatly in the 21Series.
The FrontCamera is mounted inside the duct to avoid contact risk when stroking and reflecting the surroundings.
Since I am not sure about double-sided pasting, I fixed it with Option EDR-P05 and the Bracket that I created.
This is thanks to Small TypeCamera and the nifty Option.
The RearCamera is also mounted on the side of the Number with the Option EDR-P04, considering the reflection of the surroundings and how SMART it is when mounted. (The bracket is too firm and heavy, so the Fender Eliminator in particular needs to be reinforced to prevent shaking.)
The Switch is installed by modifying the Switch stand of another product.
Since the switch is a Small Type, it can be attached to various places, but I think it is better to attach it to a place where it can be pushed immediately.
(Also check the operation with the light on.)
The GPS is mounted inside the Tail cowl and is received with no problems.
Camera adjustment is done with the MotoDR application, but it is also easy to use and is Large sturdy because it is wide-angle, especially if the level is firm.
The driving image seems to compensate for some blurring and looks solid and clean.
(Wi-Fi confirmation is said to be time consuming, so playback only on PC)
However, SS is easily affected by the road surface, so fine pitching on rough surfaces is not an option.
How did it feel to wear it?
The use of the Exclusive Bracket for the vehicle type and the space to easily handle the wiring of the body installation location and excess camera etc. makes it possible to install in a couple of hours even if you are concerned about the finishing touches.
For cars without Space, it is necessary to work with a sufficient amount of time, considering the prevention of Trouble.
The Microphone does not have wind cutting sound, and there is no discomfort at all when listening to it.
The price is high, but there are Merit models with GPS, which automatically set the clock and date and time, and have an app to check the running track and speed, among other things.
I have never purchased Large Land products because I am afraid of them, but I expect them to be durable, especially since they are made by Mistuba Sankowa.
I would recommend this product to anyone who is considering purchasing a DriveRecorderー.
View detail
Fits: Others
Shock and Vibration Absorption
Installed on QuadLock.
Used in conjunction with Shock Absorption Damper.
Size is 22.2Φ and Body is quite soft.
The price is high, so I would like to buy 1 pc. for now to try it out.
View detail
SP connect Anti-vibrationModule
I use an iPhone 12 and bought the anti-vibration because my Camera broke. It's been installed for about a week so it's not accurate yet,
I don't know, but for now Camera is usable.
It says it reduces vibration by 60%, but I don't know how much this is.
View detail
KIJIMA Handlebar Mount Bracke
I can use a small space efficienctly. I modified the Rixen Kaul adapter, combined it, and put on some kind of bicycle handle bag. View detail
It holds the phone securely in place.
[How is it used?
I purchased this product to use my phone as Navigation in Touring.
Was the one you received as per Image?
The ball joint of the mount was smaller than I expected.
Was the installation difficult?
There are only two types of Spacer for Handlebar Mounting, 22.2mm and 25.4mm, and my Handlebar is 28.6mm, so I went to Home center and bought a 2mm thick Elastic band and inserted it between the Handlebar and Clamp. Without Spacer, it was just right because it is compatible with 32mm.
A Hexagonal Wrench was also included and was easy to install. However, the Ball joint does not have much operating range front to back, so once I tried driving with the phone attached, I loosened the Bolt on the Mount once and adjusted the angle.
How was your experience with it?
Driving on public roads, the phone was firmly secured and did not sway with the vibration of the Engine.
[Was there anything that disappointed you?
It would be nice if it moved back and forth a little more.
View detail
Solid, compact, and unobtrusive around the handlebar
The SMARTMonitor has a growing selection, but the KaEdia KDR-D21 is characterized by its compactness, versatility, and high quality. 4.5-inches screen is smaller than a Smartphone, but it is recommended for those who want to refresh the handlebar area. The 4.5-inches screen is smaller than that of a Smartphone.
Installation is easy
Simply connect the power supply (Red and Black) to the Battery and the Attachment power supply (Yellow color).
All that remains is to connect the front and rear Camera and GPS to the Body (Monitor) to complete the SMARTMonitor equipped with a driverless camera.
There are four cords coming out of the Body, but they are soft and not difficult to maneuver.
The connection to CarPlay seems a bit slower than other models, but so far there seems to be no concern about disconnection after a long drive. Also, there is no such thing as losing direction when turning such as UTurn so far.
Since recent CarPlay includes meeting tools such as Teams and Zoom, it may be possible to do things like Touring while talking with multiple people instead of Income connection.
DriveRecorder is generally called highly functional, with beautiful images, and by using the KaEdia application, you can obtain sufficient information even with a Smartphone.
The app is stable in normal use, but in my environment (iPhone) the app crashes when setting up Camera. I hope this will improve in the future.
I have a Handlebar Brace (KDR-HB2) on my CB200X, so I put SMARTMonitor on it.
The company is also a well-known manufacturer of Smartphone Holders, so the product comes standard with an anti-vibration function and seems to have no durability issues.
This was my first experience with the Tire Air Pressure Check, but I was able to Pair it by removing the Pairing on the DeFault and re-installing it again. If it does not work, you may want to remove it from the Valve and reattach it again.
SDCard is not included, so it is recommended that you obtain the necessary Size's first.
Tests before connection can also be performed by feeding power to the USB-CConnector located next to the SDSlot.
(I know it's hard to use USBConnector when it's on-board)
Overall, the quality is good and the features are adequate for the price.SMARTMonitorQuantity recommended for those who are looking for a Compact screen.:Set
View detail