Reviews
Can not be installed
After purchasing Endurance's HUNTERExhaust System and purchasing and installing yss Rear shock, Exhaust Bracket interfere with Shock and can not be installed. Measures are necessary. If possible, I would like to be able to install it unnecessary or unprocessed like Normal suspension. View detail
Fits: HARLEY-DAVIDSON Universal
Quality is not good
I thought that it was soft, almost the same shape as HondaOEM and good feeling,
It was able to break without attaching it one year after installing it.
Anything is too early. I think that the preservation state of the distributor is bad or the previous story.
View detail
Fits: SUZUKI GSX-R750, SUZUKI GSX-R1100, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR1100/ZX-11, YAMAHA XJR1200, YAMAHA XJR1300, KAWASAKI ZEPHYR1100, KAWASAKI ZRX1100, KAWASAKI ZRX1200
product quality and incorrect placement
product quality and incorrect installation Very disappointed with the part given the price; in addition it created stripes on the fork. Therefore I am obliged to leave it. For the price, a part on ALIEXPRESS would have been identical. Without real discounts I won't order anything anymore View detail
Fits: SUZUKI GSX-R750, SUZUKI GSX-R1100, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR1100/ZX-11, YAMAHA XJR1200, YAMAHA XJR1300, KAWASAKI ZEPHYR1100, KAWASAKI ZRX1100, KAWASAKI ZRX1200
Part not suitable for a 1300 XJR impossible to assemble
Hello; Just received this part for my 1300 XJR from 2014, I am very disappointed and pissed off with the site as this part cost me an extra 50 € for customs and it does not fit. The part is completely askew and causes scratches on the forks !!!. I will NEVER order ANYTHING on the site again. I will go to ALIEXPRESS, at least the prices are lower and the hardware can be mounted on the machine View detail
postage
The postage on this item is way over the top being way too expensive at over 70$.. I have bought a lot of parts from your store and I feel that you are getting out of hand with your postage.. please revise the postage and I may buy more parts.. steve wardle vjmc of australia View detail
The accuracy of Screw Mountain is bad.
Inside Bolt can not enter! Screw mountain collapses soon. If you confirm to HURRICANE by phone you were told that it might be fixed if you turn Bolt into a new one! View detail
![Rear Shock 330mm [HYBRID Series]](https://img.webike-cdn.net/catalogue/14758/cub16-hb-330r_TS.jpg)
Fits: HONDA monkey, HONDA Benly CD90, HONDA Super Cub 90, HONDA Super Cub 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA Benly CD90, HONDA Super Cub 90, HONDA Super Cub 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Can not Recommend to CD 90 Owner.
Small raw CD90 Second Type Model 12 vSpec. It attached to.
It was conformed at once and there was not description of kind of processing, so it is amateur but I challenge it.
First of all the Instruction Manual is not kind.
In the sent Suspension there was Sus X2, Ring, Sticker,
Apart from Sticker, I do not know how to describe Ring, how to use it, so it is unknown.
Then why do not you try to put in the vice on the upper part of the Suspension as much as possible. It is conforming, right ??
So we knew that the attached Ring came in and we tried to proceed with the procedure of Ring removal at the top of Suspension → attached Ring installation,
Since there is no description of this part, I do not know how to do it,
Forcibly removed it with Hammer, it was finally possible to install it by removing it while it became tattered.
Because of this, the Rubber part that protects Ring did not fit well and I cut out the part that came out.
It's shit fucking clearly.
I'm licking the User and the buyer.
Because I can not enter inquiries and Objection
Even if you do not know who you are going to buy from now on, you have to solve it by yourself.
I will never buy Manufacturer's one here again.
Even the hole of Ring can not handle it properly Suspension is so scary that I can not ride so I returned it to the OEM after all.
View detail
Watch out for the same model even in the same Motorcycle!
If you ordered and installed the Aprilia RS 250 Fork seal, Oil leakage - - - Size is slightly smaller when disassembling and confirming again. Even with the same RS 250, there was a previous term and a latter term, in the previous term it was Marzocchi, in the latter term it was Fork made by SHOWA.
Since there was no explanation of the year on the screen of the order, I checked the model at the HP of the distributor PLOT and I ordered it because Parts were the same - - -
After all, I noticed immediately after installation, but as I was driving without being aware of it, Oil adhered to the Brake disc and Brake did not work at all and the accident was unfortunate..
Anyway, since RS250 of APP is rare Motorcycle, we also carefully order other Parts.
View detail
Hard, anyway hard
It is harder than Normal suspension, it can be used if it is a two-seater Main, but it can not proceed if it is solo, Main. It seems to be soft with Spring's option, but I want you to wear soft one from the beginning. If I weigh 60 or less I can not put 1G sag. View detail
It is only an appearance to the last.
In this Product Contents, I think that strength of Stabilizer intrinsic can not be kept. Although it seems that adjustment can be made by the difference in Fork width, it is difficult to fix it. Also, I can not imagine that the fine of the adjustment Bolt will keep the strength of the Stabilizer. It is only an appearance to the last. (Stabilizer seems like a quasi... I think I will remove it soon..
View detail
![MONO LINE Rear Single Shock [MX Series] MX366](https://img.webike-cdn.net/catalogue/images/50511/mx_366_01_TS.jpg)
It does not attach to ordinary
I purchased for R1 - Z
Bolt on the Frame side does not enter
YSSShockUnit's upper part
I sharpened it like a demon and wore it
Because it scraped off so much that there was a problem with strength
I am concerned about future Trouble,
I do not feel well even if I ride
Because it is a scar, it can not be resold
In addition, the pre-compression on the compression side is 3 steps
I feel like I have not changed even if I make it strongest
I expect to improve in the future.
View detail
Fits: KAWASAKI Ninja 650, YAMAHA DT200WR, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA XJR400, YAMAHA XJR400R, YAMAHA YZF750SP, KAWASAKI Ninja 650, YAMAHA DT200R, YAMAHA TZR250R, YAMAHA TZR250R, YAMAHA TZR250R, YAMAHA XJR400R, YAMAHA YZF600 THUNDER CAT, YAMAHA YZF600 THUNDER CAT, KAWASAKI KDX180 80-93, KAWASAKI KDX180 R 80-93, KAWASAKI KDX180 SR 80-93
Fork oil - Dust - Oil seal exchange
Dust Seal had cracks and tried to buy it
Quickly Dust - Oil seal exchange.
I put an Oil but because there was a leak of Oil from Right Side, I will rebuild but it will not get over it!
Compared to the one attached first, a little newer was Gusugusu.
So after assembling the Oil seal which was attached first, OK after installation
After that, I tried running, but there is no leakage of Oil, but the opposite Left Side is a little like Oil is blurred between Dust Seal and Fork.
After all, I regret that I should have made OEM a little more expensive.
View detail
I was disillusioned..
I can not be satisfied with the performance of OEMRear shock of FZ1
I decided to exchange for the yearning OHLINS.
I was in the Motorcycle industry, but NITRON and
Bitubo, Ma Bird's etc. OHLINS is the only one that actually has Realevalue.
As Manufacturer which is the reference of ReplaceSuspension, first I thought it was OHLINS.
However, when reaching and opening the box, there was a lot of bruises in the Reserve tank that shaved Gold anodized and the Aluminum of the earth appeared.
As expected it was consulted with Webike that it would not exist, we had to exchange it immediately.
The thing that arrived was very beautiful so please install and go to Short touring.
A week later, this time hydraulic Preload Adjuster
There was Oil bleeding from the Hose mounting surface.
I tried putting it for a week without worrying about whether it is Oil at the time of assembly but it seems that it is not bleeding,.
Spring which came first was very hard, so I procured Spring on my own and exchanged myself.
Carrose RearJapan does not sell Spring, is not it wonderful.
A week after that, Oil bleeding again from the same place.
This time it is spreading a little more.
However, if you are exchanging Spring yourself, or that there is evidence
It seems that there is a high possibility that it will be repaid as a fee as it is judged as not covered by security.
It is already extremely troublesome and it can not be trusted even by replacement or repair.
I will also run in Normal suspension during that period.
I bought high parts and this is a nasty thing to do..
I can not help it, so I will fix it myself.
After all it seems to be caused by the fact that the O-ring was not contained in the Joint part.
Furthermore, Aluminum parts of Joint corroded and Anodized was peeled off.
Whether Labor Carrice Rear assembled, OHLINS Headquarters
There is nothing to know whether it was assembled, but the invisible part
Quality control and instructions for assembly - Management seems to be poor.
Although it may not have been attached very much this time,
There are no compliments for never being a defective product.
Because it is an exclusive luxury item that can only be purchased by people with a little stickiness.
Please sell a "dream" more firmly, thank you..
View detail
Fits: HONDA NC700S, HONDA NC700X, HONDA NC700X, HONDA NC700S
NC 700X of matching with the three friends, supposed to be around the match
Three people ordered replacement work in order
However, only my Spring was burning long
When it says, it is about 5 cm long - - -
Obviously Solidly hard when incorporated
If Color is an OEM Product, whatever Small unevenness rigidly bounces off briskly
What is Hyper pro's product management for this level - - - I will not buy it again.
View detail
Fits: DUCATI HYPERMOTARD 1100 SP, DUCATI STREETFIGHTER 1098, DUCATI 749 S, DUCATI 916, DUCATI HYPERMOTARD 1100 EVO, DUCATI HYPERMOTARD 1100, DUCATI 999, DUCATI 749, DUCATI 996, DUCATI 748, DUCATI 1198, DUCATI 1098, DUCATI 848, DUCATI ST4 S, DUCATI ST4, DUCATI ST3 S, DUCATI ST3, DUCATI ST2, DUCATI MULTISTRADA 1100, DUCATI MULTISTRADA 1000 DS
MULTISTRADA 1000DSDS incompatibility
I purchased MULTISTRADA 1000DSDS as compatible model so I purchased it but I can not use it because I like Small. Can we exchange or return it? View detail
Fits: HONDA NC700S, HONDA NC750S, HONDA NC700S, HONDA NC700X, HONDA NC700X, HONDA NC750S, HONDA NC750X, HONDA NC750X
Although I have not installed it yet - - - - - -
Why the Instruction Manual is Copy (?o?) Moreover, it is hard to read Small - - - - Although the box is certainly Hyper pro, I doubt that it is really genuine. View detail
[ -- the Webike Monitor ] -- Texture was not quite satisfactory although I thought whether it would be reasonably priced. -- although attachment is not ready yet, a possibility of growing into Stock going as it is is high -- peevish [ come out an
[ -- the Webike Monitor ]
-- Texture was not quite satisfactory although I thought whether it would be reasonably priced. -- although
attachment is not ready yet, a possibility of growing into Stock going as it is is high -- peevish [ come out and ] --
View detail
Fits: SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT400, SUZUKI BANDIT400, SUZUKI BANDIT400
First, when using a Normal fender, an attached Spacer is insufficient for height and it cannot attach with it. It is necessary to process the mounting hole on an oblong hole.
First, when using a Normal fender, an attached Spacer is insufficient for height and it cannot attach with it.
It is necessary to process the
mounting hole on an oblong hole.
Since the article sent to me was such a thing, when it is incorporated in a direction without knowledge, the engine performance of a Front fork may be spoiled.
Please inquire carefully in the case of
purchase.
View detail