Reviews
It is not good ...
Purchased for Harley's Side number.
First of all Bracket installed is LePera.
It may be thin so that it can be easily bent by hand, but it looks cheap looking.
Also, since the Wiring of the LED is right beside, it can not hide the Wiring and it will be visible, so I can not recommend it to the stickers.
As in the case of reference images, it may not be a problem when installing in Motorcycle like CB.
View detail
Sphere with the LED H7 Conversion kit
Buy Kawasaki NINJA 1000 with Sphere LED H7 Conversion kit, it is bright and very cool Sharp image is good. I can recommend it.. View detail
Compact
Because the vehicle has changed, again repurchase.
It is easy to solve the License Plate Light problem in making it a Fender Eliminator.
Basically I only ride during the daytime, but the one I'm in trouble is License Plate Light.
I attached a separate formula, but I am not good enough.
Eventually I came back to this License Plate Bolt Type.
Again the appearance is clear.
After all, a little more light itself is wanted to spread.
View detail
Recommended for those who do DIY!
Since I do not want to use Gold as Fender Eliminator, I bought a kit with only Lamp and Bracket.
By bracketing with Bracket Number, Lamp comes just right.
The shape of Lamp is also Small until now so simple, so I think that there is no discomfort in any Motorcycle.
It is easy to connect with NORMAL's License Plate Light.
View detail
Mounting Bracket a little more - - -
With the relocation of Number, License Plate Light was newly established in this product.
As in other reviews, NumberHolderetc. It is impossible to install at the same time. Therefore, I disconnected the top of Number Holder.
It would have been better to give a little attention to the installation Bracket.
The manual was also very easy to understand and easy to process Wiring. By the way, we did not use the attached Wiring connection at the Bullet Terminal terminal.
View detail
Replacement from what was previously installed
Previously, when I installed the Fender Eliminator Kit, I attached a DEYTONA-made one to OEM's License Plate Light,
Because the thickness of Body was quite good, it overlapped with Reflector and it was a little eyesore.
Since we purchased ODAX's ones in OEM License Lamp Body this time,
It looks cleaner, I got better looking.
We use the same thing as ODAX's purchased this time directly attached to ESTRELLA's Tail lamp lens,
Since Body is soft and can be bent to some extent,
No trouble with installation location, you can also recommend the price cheaply.
View detail
Recommendation to Number Inn!
I wanted to refresh around Tail, so I converted it to Number in.
At that time I was wondering what to do with License Plate Light, but I made it to this item that is cheap and hassle free.
The making of details is slightly B-class atmosphere but it is not so noticeable, and I am satisfied with Large because I am not too nervous to that extent.
View detail
Material : I wanted Aluminum.
Holder of LED light is Material : I think that the texture was better if Aluminum.
For this price Plastic felt high.
Other Manufacturer goods at this price Material : I am disappointed to know later that you have Aluminum
View detail
Rear Fender's License Plate Light
【What made you decide the purchase?】
OEM Rear Fender's shape was dissatisfied, so after processing it became impossible to install OEM License Lamp, purchased this time and bought Number mounted Bolt for purchase.
Moreover, I was able to purchase with confidence by saying.
【How was it actually used?】
Rear Fender is really Slant in my car, so I thought that the light source could be seen from behind and the vehicle inspection did not go through unless the LED part was bent by hand when installing.
Also, since Number was attached to the Stop-lamp bottom surface Limit, when this product was attached to the car body, the LED lamp was covered on the Stop-lamp, and we abandoned the installation.
In addition, if I bent the LED part attached to my vehicle from the Rear until the light source became invisible, I could only illuminate Number top.
【Was it difficult to install? (Hard parts case)】
Although it is easy to install, it is impossible to install it like me if you do not position the Number after calculating the Clearance of Number and Stop-lamp before installation.
Also, the Fender part (Number) Is too slant, you can install but the light source will be visible from behind.
【Please tell me the point of installation and hang (in the case of Hard parts)】
I think that the way to install so as not to fail like me is to do firmly Number mounting positions on the foundation.
[Is there anything I was disappointed about?]
There is none. I could not install it due to my own mistake.
【Hope for Manufacturer - Please let me know if you have any improvement points]
There is none.
【Have you compared items?】
There will.
View detail
I could not adapt to my body
【What made you decide the purchase?】 Required item
I was looking for License Plate Light and I was looking for a small one.
Also, since the light irradiation width of the LED was a wide angle type, purchase.
【How was it actually used?】 Required item
Rear Fender is quite diagonal on my car body, so when I installed it, apparently I could see the light source and decided that I could not clear the car inspection.
However, since the light emitting part can be bent to some extent by hand, you can adjust the angle.
【Was it difficult to install? (Hard parts case)】 Any item
Installation on the car body is only to interrupt the License Plate Bolt, but we are using LEDs and we have to wire with the car body.
【Please tell me the point of installation and hang (in the case of Hard parts)】 Any item
Wiring please go definitely.
If you bend with too much hands, because it is a thin iron plate it will cause Gold genus fatigue and break.
[Is there anything I was disappointed about?] Required item
It was that I could not conform to my body.
There is no problem with the product.
【Hope for Manufacturer - Please let me know if there are any improvement points] Required item
It is a type that pastes the LED to Bracket, but I think that it will peel off someday. Is it better to change to Bolt Tightening Type for Bracket?
【Have you compared items?】
There will. It is another part of DAYTONA
View detail
Fairly
I purchased Number to relocate to SIDE. Although I think that there is enough brightness, the transparent resin of the LED part is a little cheesy, but there is no problem because it does not look quite like in the vicinity, so there is no problem. I am satisfied because the price is also Reasonable. View detail
I wonder how many months I will keep this time?
In February of this year I wrote in impressions with other similar products,
In June, the transparent part of Silicon Material? Got dull,
It got dark by the moment.
So I found this and tried to replace it.
Brightness is enough.
Cable "Rose ahead" So, I'll handle Bullet Terminal as appropriate.
Paste attached with Double-sided tape attached Firmly sticks.
Is the transparent part of the problem soft resin?
I hope to keep it better than before.
Cable processing properly. (I do not care too much)
Probably it can be Recommendation (lol
View detail
On License Plate Bracket
I tried purchasing it because it is the latest version of DAYTONA's License Plate Light.
It is used in conjunction with my own License Plate Bracket because it is more diffused light than the conventional LED.
With things can be installed with confidence.
Bracket is probably Aluminum, so I am worried about the strength against rough vibration on rough roads.
View detail
Since it was the lowest price with the LED Bolt, it purchases.It uses as Number light.Although the stand of a Stay and a passive reflector, a Number frame, and a Number plate will be collectively stopped in the case of attachment, a place [ t
Since it was the lowest price with the LED Bolt, it purchases.It uses as
Number light.Although the stand of a Stay and a passive reflector, a Number frame, and a Number plate will be collectively stopped in the case of
attachment, a place [ the effective thread part called it the Limit ].Since
construction material is not iron, either, intensity is anxious.It is anxious although he thinks that water proof can be expected to some extent as transparent resin is [ portion of
LED ] contained.As [ be / since it was
LED and became a local way of illuminating, it had estimated that light probably did not fly back directly, but / it / a diffusion Type ] ... A luminous source's appearing and indication are likely to be received depending on the angle of the
Number plate.As [ shine / the Number itself / in the distance of
however this LED, and a Plate / seldom ] ...
-- or [ that there are indication by an automobile inspection and control indication since it is a Level which can say for the time being there is Number light ].Calling it , it goes by this until it breaks.
View detail
It purchased in order to feel the circumference of a Tail refreshed with Muffler exchange.Although it is satisfied with goods in general, an attached One-touch connector to wiring a plug on hand, not using after all that (when there was at least 1.25s
It purchased in order to feel the circumference of a Tail refreshed with Muffler exchange.Although it is satisfied with
goods in general, an attached One-touch connector to wiring a plug on hand, not using after all that (when there was at least 1.25sq, it was right just, but wiring of the Tail lamp was too thin and the Crimp had uneasiness) which did not suit well After use
,Since the Fender less of the DAYTONA was come by off 55% at the Sale, he repents [ that what was necessary was just to have bought it there and ] rather than he buys it with a Rose... Brightness and the intensity of a Stay also come out that it does not seem to problem be, and that of the
goods themselves are satisfactory.
View detail
The color and the form were cared about them and chosen. Since it was legally required, it purchased. Since required brightness was secured, it is satisfied. A dissatisfied point is conspicuous too much for a while with a white light for LED. I think
The color and the form were cared about them and chosen. Since it was legally required, it purchased. Since required brightness was secured, it is satisfied. A dissatisfied point is conspicuous too much for a while with a white light for LED. I think that the cleaned Motorcycle is suited. View detail
It purchased with - Number lights for Fender-less-izing and Number maintenance which diverted the custom-made brand-name parts of the VFR800 time-tested product. It is easily processible, if there are iron Files etc. since it is a product made from a
It purchased with - Number lights for Fender-less-izing and Number maintenance which diverted the custom-made
brand-name parts of the VFR800 time-tested product.
It is easily processible, if there are iron Files etc. since it is a product made from an Aluminum although some these products must be processed in formation of
Fender less.
Texture is also good and use as it is which is not accompanied by
processing is also smart.
the Fender less kit of the
Active is used by NC39 and RC42 -- mutual -- a gap is also uncanny in itself at the same texture -- he likes.
The Active will be used, if there are some which agree with required parts since it is firm structure although the degree of attention had the low exposure from the outside of
few.
It is very good.
View detail
Since the Tail light was moved to the Fender upper part, Number light was added. Although the Number plate was a thing of the bundle, it makes a Stay and it enabled it to illuminate it effectively also with one light from the first.
Since the Tail light was moved to the Fender upper part, Number light was added. Although the Number plate was a thing of the bundle, it makes a Stay and it enabled it to illuminate it effectively also with one light from the first. View detail
It attached to VF750F. It becomes such touch. It is felt refreshed [ light / pure / Number ]. Incidentally, it combined with LED-ization, the Reflector was also exchanged for the product made from an Active, and the Number stay is also c
It attached to VF750F.
It becomes such touch.
It is felt refreshed [ light / pure / Number ].
Incidentally, it combined with LED-ization, the Reflector was also exchanged for the product made from an Active, and the Number stay is also changed with the angle of a DAYTONA this time.
Probably, a few contributes also to reduction in power dissipation, since it is always Right On.
A little Rear fender is also due to be cut from now on.
View detail
since the Number was transferred for carrying out SIDE appearance, cling. It is illuminating firmly as indispensable Number light during the automobile inspection and a general public road run. Since wiring is die length of about 30 cm, use of t
since the Number was transferred for carrying out SIDE appearance, cling.
It is illuminating firmly as indispensable Number light during the
automobile inspection and a general public road run.
Since
wiring is die length of about 30 cm, use of those other than a Tail requires extension.
View detail