Reviews
bulb-out replacement
Cheap? Nice to look at?
I had no problem inspecting the car.
View detail
If you're looking for a compact license plate light, you've come to Recommendation
[How is it used?
As a replacement for the LED attached to KIJIMA fender less that was damaged by water after one run in the rain.
Was the one you received as per Image?
Compactness, texture, and coverage are all satisfactory.
Parenthesis is good for wing section shapes.
Was the installation difficult?
If you have made it to Fender Eliminator, Bolt On.
If you don't have it, Wiring process is required.
How was your experience with it?
I've run it in the rain a few times and it's in good shape.
[Included Parts:were they on?
License Plate co-tightening with Bracket.
[Was there anything that disappointed you?
I thought KOSOLogo was going to be lame, but I was pleasantly disappointed that it didn't stand out.
I bought it because I thought it would break soon anyway, but it's surprisingly long-lasting.
This is a Recommendation for those of you who are using a Fender Eliminator and a big License Plate Light and a GSX400E.
KOSO is hard to underestimate!
View detail
Ideal for position lamps
I am using this lamp in the position lamp of Scooter and it is very bright in comparison to the NORMAL. View detail
4.6
How we did it:We wanted the cars behind us to be able to recognize the Motorcycles, because it was too dark for OEMs.
Installation and Accuracy:It can be installed the same way as the OEM. Reverse of the removal order. Turn Right to lock after inserting the contacts.
Quality and texture:It is also properly coked. There is no miscellaneous taste.
Performance/Function:it's very bright compared to the OEM beanbags. You can see this by checking the Rear from the riding position.
Feeling:I've been using it for a year, exposed to the wind and rain, but there are no problems.
Cost performance:If you can buy safety and security at this price, it's very good.
Overall:I'm glad I bought it.
View detail
Just enough to give it a try.
I installed it on my Yamaha Max star125.
It is written as for ZOOMER, but you only need to process it with wiring, so you can put it on any car model.
It's quite bright.
I'm not sure how durable it will be, but it feels like it's installed
It's nice and compact.
I'm wondering if it's durable.
View detail
I think I can handle the car inspection.
I installed them because I chose the Fender Eliminator Spec. The installation is possible to fix by Bolt&Nut and the brightness is bright enough, so I think it will pass the inspection without any problem. The power supply can be removed from the tail lamp and it is easy to install. View detail
If you can process it yourself, that's good.
Quantity:I'm thankful that I was able to buy it for less than $1,000 for 1 Set of 2pcs. but it's only cheap. The sea-ring is not done properly and I did the sea-ring by myself using the Glue gun. Although the important LED is bright, it sometimes flickers by Idling, probably because of the relation of the voltage of Battery. It seems to be possible to make it to the position light etc. according to Ideas. View detail
Cost-effective License Plate Light
I bought it for the ZX-11
It is easy to install as it is tightened to the number of bolts
Wiring is no problem if you connect it with the Bullet Terminal and Coupler Mm
And the light is perfect! It's too bright
You can choose the color of the License Plate Light itself, I chose Gold It was good for the price
License Plate Light is available from various manufacturers, but Isn't the License Plate Light here a pretty good cosmetic?
View detail
It was as expected.
I felt the OEM WedgeValve was not enough and replaced it
The installation is quite can tan and looks good, the LED light is parenthesis good
View detail
It's pretty bright
I'm happy with how it looks, it's cool and bright
According to my touring buddies, it's so bright at night
(I guess it depends on the angle of Number …)
The cable is quite thin
To prevent disconnection, the junction part should be fixed so that it doesn't move
When I pulled on Cable, the soldered part of the LED and Cable was broken It was
View detail
I matched the Headlight
I've made the Headlight a Sphere Light 4500K and I've got a T10 to go with it Quantity:Purchased in 1 Set of 2pcs
The Position light was bright enough and there was no color difference between it and the Headlight
The T10EX, which also has a light-emitting part on the side, may seem even brighter than the T10EX because the light-emitting part is only on the front It is not
This area may be a matter of conformity and preference
I replaced the License Plate Light at the same time, but it's moderately bright I'm glad I used the T10, which doesn't have direct light
However, it takes a lot of force to insert it into the Socket, so you have to be careful not to touch or damage the luminous part Be careful
View detail
Fits: Others for 12V Vehicle
Quality problem
The quality of the mounting bolts is the worst The bolts are the worst in the world I have never seen anything as soft as this one
It's not a cheap product, so you'll want to make sure it's at least as good as it can be
It didn't make sense to use Bolt mounting type
As for the LED of the body, the whole of the License Plate is almost recognizable I am illuminated
View detail
bright
Number I installed a light, I am convinced. LED lighting is beautiful.
It's easy so you can install it in a matter of minutes. Please watch a video of Manufacturer.
I think this Manufacturer is no doubt.
View detail
It is a sufficient amount of light
It installed in ZZr 1100D. Until now, at OEM's Halogen bulb, it was dim, it looks like an old-fashioned feeling, but after replacing, the entire number is illuminated with White color, the amount of light is sufficient and there is no problem in performance. View detail
Because it regulates with Number, there is no worry about Space.
? 【What made you decide the purchase?】
I put the LED in the Dummy Tail lamp of the XR 650R so that it could be attached to both the DRC's Tail light and the DRC Tail light, but it looks like it was hard for a battery-less vehicle, so if I did not erase the Headlight, the Blinker ceased blinking, so DRC Tail changed to one with only License Plate Light.
? 【How was it actually used?】
Headlight + Blinker blinking OK now, but I think that we want to strengthen Genes.
? Was the installation difficult?
It was difficult to pinch it between Number and License Plate, so it was not difficult, but since I was diverting the LED Tail Lamp for XR 250 of DRC, removing the Tail light part saw the bracket part of the Aluminum material in a stupid state I painted the part of Aluminum Ground where I can see Black.
? Please tell me the installation point and hang
Tail light 2 places (For Dummy and DRC) For wearing, I bite a branch to each of Wiring 3 books coming out of Tail light. This time it is only License Plate Light, so we connected Position and Grounding Wire by branching. Because Wiring is not enough, we bought Wiring at Home center and extended it.
? [Is there anything I was disappointed about?]
I think that the vehicle inspection is OK with this. As for Waterproof, although it is unknown, since I do not mean that the LED is exposed, I think that Large is durable.
? [Request to Manufacturer - Please let me know if you have any improvement points]
Installation of Bracket is Nut tightening but Nut size is too small and there are no tools to match.
? 【Have you compared items?】
MotoCrazy LED License Lamp Set
View detail
Mounting with Fender Eliminator Kit
LED Lamp on the Fender Eliminator Kit was very poor so I purchased this additionally.
There is no hard work because the installation is only co-tightening with the License Plate and processing of the LEAD line.
View detail
It looks nice
Since I moved the Number position
I need it and I am relieved because it is a purchase Active product
With 4 LEDs, it seems that there is no problem photometrically
We have stocked Bolt balls of Number so we will light it together.
View detail
Easy to use for the first time in Small.
Along with Fender Eliminator, it turned on..
It seemed that the adhesive strength was weak in the attached Double-sided Tape, and it peeled off immediately when it stuck to the situation. Large seems to be durable on a flat surface.
Although I do not know about durability, I seem to have done Waterproof treatment for the time being, and it was on without problems even after the rainy day.
Light intensity is sufficient brightness to illuminate Number.
Cost performance is also nice and it is Recommendation because it does not bother with the installation place because it's Small..
View detail
LED power supply compatible with AC power supply License Plate Lamp
Purchased to install License Plate Light on KDX 200SR.
Following the adjustment of the angle angle and the installation of the Reflector, it is now possible to run completely with confidence.
【What made you decide the purchase?】
As we increased Headatt's Watt count, we decided to make LED light with low power consumption.
Normal LED light can not be used with KDX of AC power supply, but it is thought that it can be diverted if this product for AC power supply GROM can also be diverted.
【How was it actually used?】
Thickness was thin, and it was installed on the back of Tail cowl.
Installation is strong Magic tape + Tie Wrap Fixing glued with cemedine.
In the vicinity of Idling there is insufficient power generation amount to illuminate the whole number, but when I confirmed by having a friend run behind, I can see the number sufficiently with white light during driving.
【Was it difficult to install? (Hard parts case)】
Because it is a product for GROM, Wiring was short and could not be attached to KDX as it was.
For that reason Wiring was extended processing.
Other than that it was installed without problems.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Adhesive Tape is attached to the product, but it alone is uneasy with Off car with many vibrations.
Therefore, peel off adhesive, attach strong Magic tape to License Plate Light and car body with Cemedine and adhere it, and fixed it with Tie Wrap.
It runs over 1000 km including off-road, but it does not fall at all.
[Is there anything I was disappointed about?]
None
【Hope for Manufacturer - Please let me know if you have any improvement points]
It is better to reduce the power consumption.
【Have you compared items?】
None, I can not find any other LED corresponding to the AC License Plate Lamp.
[Others]
For now and so on etc. Although there is not, but this product diverts the commodity for GROM to the last, I think that complaints can not be said even if it breaks suddenly.
Anyway, it is now possible to run completely with peace of mind by attaching this product following adjustment of Number angle, Reflector, from the state of almost Number only state.
View detail
Expectation of lifetime
I changed all LEDs since I made all LEDs leaving the License Plate Light of the 90 year GSX-R 1100. I did not expect the brightness, but it is bright. I am looking forward to how much more. View detail