Reviews
Fits: HONDA MONKEY (FI), HONDA MONKEY (12V), HONDA GORILLA (12V), HONDA MONKEY 3.1PS (6V), HONDA GORILLA 3.1PS (6V), HONDA MONKEY 2.6PS (6V), HONDA GORILLA 2.6PS (6V)
[Webike Monitor] It purchased as an object for DAXs which exchanged the Rear suspension for the long thing. Although not attached, I still think that a Quality is high with considering a price. That is a little sorry for the portion of Spring
[Webike Monitor] It purchased as an object for DAXs which exchanged the
Rear suspension for the long thing.
Although not attached, I still think that a Quality is high with considering a price.
That is a little sorry for the portion of
Spring receptacle to be Bolt appropriation.
If the
Spring washer etc. are not made to bite, it is the touch from which it is likely to loosen and escape.
View detail
It is used by 17-inch-ization of Ape. Although adjustment stands are the necessaries in the case of wheel diameter change and also considered it the durable [ the direction made from steel ] kana ?, appearance was thought as important and the product
It is used by 17-inch-ization of Ape.
Although adjustment stands are the necessaries in the case of wheel diameter change and also considered it the durable [ the direction made from steel ] kana ?, appearance was thought as important and the product made from aluminum was chosen.
As : and expected, it is quality and good-looking. Although the aluminum parts of a back step swing arm are matched well and it is written as the object for - monkey gorillas used as the point of KASUTAMU with which a step is decorated, [ good place ]
By the spring for a stand holder (attached to the back step kit), and Ape50, since it is : and a product made from aluminum the bad place in which wearing also to Ape is possible,
Impressions - from which the stopper part of a holder when - stand which will cave in if - crawler bearing area with a possibility of damaging by high load is small and is a soft ground surface is raised becomes per angle, others: Although it is a product made from aluminum, therefore although there is also a place for it to be [ little ] anxious,
It is used without caring so much practically.
Rather than anything, the texture of aluminum is pleasing in the highest.
View detail
It supplied simultaneously with a lowdown kit. Unless it uses short stands, since a car body becomes near quite vertically, it is not stopped by the slant face. Since the danger of breaking down also from the flat ground becomes high, this is indi
It supplied simultaneously with a lowdown kit.
Unless it uses short stands, since a car body becomes near quite vertically, it is not stopped by the slant face.
Since the danger of breaking down also from the flat ground becomes high, this is indispensable items.
View detail
Fits: DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S, DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S
Although it is used by Monster796, this is easy-to-use. Since there is no projection in a stand and it was easy to slide on it from the first, it was dangerous, but receipts and payments became very easy only by following Colet. To Monster, I thin
Although it is used by Monster796, this is easy-to-use.
Since there is no projection in a stand and it was easy to slide on it from the first, it was dangerous, but receipts and payments became very easy only by following Colet.
To Monster, I think that they are items of a recommend rightly.
View detail
Fits: YAMAHA Vino classic (SA10J), YAMAHA VINO (5AU), YAMAHA VINO (5AF), YAMAHA VINO (5AE)
First, a description is incomprehensible. Although I had attached the side stands of the company by the live broadcasting DIO in the past, it was not so incomprehensible then. Next, if it does as a description, it will be hard to do work. Sinc
First, a description is incomprehensible.
Although I had attached the side stands of the company by the live broadcasting DIO in the past, it was not so incomprehensible then.
Next, if it does as a description, it will be hard to do work.
Since it is side stands, also as naturally being forced a quite impossible posture, non-tea passes it.
Its direction which removed the cowl obediently is easy although time is taken, and it is made finely.
(However, there are many things which helmet in, a side cowl, etc. remove in removing ANDAFUROA.) The goods themselves are common especially not too bad.
Last time in a similar manner, if it will carry out in several years, it should rust immediately.
View detail
Fits: DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S, DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S
Although sold as an object for DUCATI from the first, the side stands of DR-Z400SM were equipped this time. (Smile) It was good until two characteristic right and left took out from the usual UP muffler and it exchanged for the down muffler, but since
Although sold as an object for DUCATI from the first, the side stands of DR-Z400SM were equipped this time.
(Smile) It was good until two characteristic right and left took out from the usual UP muffler and it exchanged for the down muffler, but since the hook make a guide peg easy to hang on attached side stands was not attached, he was hard to take out side stands with the state where it rode on the motorcycle, and they were troubled by it.
Although medium size was purchased to the trial by the reason for saying this time, when deleting the clip opening part of stay somewhat by the disk grinder also in the stand of attachment of diameter 30?, it has equipped satisfactorily! A price is a product made from a stainless strong also against handy upper rust, and form is also considered well.
They are parts which bring to the motorcycle which side stands cannot take out with a back step etc. easily, and are!
View detail
Fits: DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S, DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S
A function has no problem. A thing with the design appropriate for [ for a while / thing ] Yasu considering a price is a difficulty. A place [ color also wants silver other than Black ].
A function has no problem.
A thing with the design appropriate for [ for a while / thing ] Yasu considering a price is a difficulty.
A place [ color also wants silver other than Black ].
View detail
It is used by the gorilla (12V). It equipped with back-step-izing. Having meat-omission-processed it, he is smart. Moreover, compared with other products, it is thick, and in the weak MONGORI system of a crankcase, if good for the oscillating
It is used by the gorilla (12V).
It equipped with back-step-izing.
Having meat-omission-processed it, he is smart.
Moreover, compared with other products, it is thick, and in the weak MONGORI system of a crankcase, if good for the oscillating measure ? reinforcement ? of a case, I will consider.
YO which is recommended.
View detail
This stand from minimoto is great quality and at a good price. I have used it on my custom 1976 Honda xl75 cafe racer project. The stand is steel and is strong with good paint quality.
This stand from minimoto is great quality and at a good price. I have used it on my custom 1976 Honda xl75 cafe racer project. The stand is steel and is strong with good paint quality. View detail
Giorno AF24 was equipped. Since the rear box was attached and it was very serious to have applied a center stand with a carrier, it opted for purchase. Since a few will surely once be pulled back in the case of a center stand, it is difficult in t
Giorno AF24 was equipped.
Since the rear box was attached and it was very serious to have applied a center stand with a carrier, it opted for purchase.
Since a few will surely once be pulled back in the case of a center stand, it is difficult in the parking area (smile) which became easier than imagination to stop at back, but it is easy.
It has stopped using a center stand thoroughly except [ maintenance ] the time.
Attachment is also easy and it is recommended!!
View detail
Fits: HONDA monkey, HONDA monkey, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY BAJA, HONDA MONKEY BAJA
Since the back step was attached, it purchased. Since it was attached firmly, it was good. A crack is hard to be attached, it may be stained with a crack or a color may not separate easily.
Since the back step was attached, it purchased.
Since it was attached firmly, it was good.
A crack is hard to be attached, it may be stained with a crack or a color may not separate easily.
View detail
Although it is an object for BMW, it purchases to DUCATI Monster. The form of an assist bar matches the stand and is touch good. On the occasion of attachment, since the DUCATI was thinner, the path of side stands attached and used the clamp part
Although it is an object for BMW, it purchases to DUCATI Monster.
The form of an assist bar matches the stand and is touch good.
On the occasion of attachment, since the DUCATI was thinner, the path of side stands attached and used the clamp part on both sides of the rubber board.
With [ since it is not just going to apply load / use ] no problem.
Or [ becoming a measure against slack by vibration ]?
View detail
The price which was purchased together and attached with formation of an order lowdown is also handy, and structure of the sushi product itself is also solid. The inclination degree of the motorcycle in the state where the stand was hung is also just
The price which was purchased together and attached with formation of an order lowdown is also handy, and structure of the sushi product itself is also solid.
The inclination degree of the motorcycle in the state where the stand was hung is also just right touch.
if the width of a concave portion asks wobble measure and a wiruswin a few widely because flexibility is given -- -- pure -- since it is somewhat wider, it somewhat carries out that it is shaky of after attachment -- please feel easy about that which is problematic and becomes precocious especially -- -- since there was a reply, it does not care.
View detail
Fits: HONDA jazz, HONDA jazz, HONDA jazz, HONDA jazz, HONDA jazz, HONDA jazz, HONDA magna fifty, HONDA magna fifty, HONDA magna fifty, HONDA magna fifty, HONDA magna fifty, HONDA magna fifty, HONDA magna fifty
It attached to JAZZ assembled by the parts by which it was awarded at the auction. May the stand of a daytona be cheap although the stand of hurricane is also used?
It attached to JAZZ assembled by the parts by which it was awarded at the auction.
May the stand of a daytona be cheap although the stand of hurricane is also used?
View detail
Fits: KAWASAKI Z1100GP, KAWASAKI Z1100R, KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1000 (air-cooled)
trick looking side stand, idal for a zed that has been raised or lowered. well finished.
trick looking side stand, idal for a zed that has been raised or lowered. well finished. View detail
Fits: BMW F800R, BMW F800R, BMW F800R, BMW F800ST, BMW F800S, BMW F800GT
attachment is also dramatically easy -- DIY -- a tone-deaf one was also satisfactory. As for the impression of appearance, a car body is also stabilized in GOOD. Are they recommended goods? . .
attachment is also dramatically easy -- DIY -- a tone-deaf one was also satisfactory.
As for the impression of appearance, a car body is also stabilized in GOOD.
Are they recommended goods?
.
.
View detail
It is attachment to Ape100. It is combination with the stand holder for back steps. The spring used the thing for cubs. When the stand of Ape was used as it was for back step attachment, the balance was likely to fall bad, but it was stabilize
It is attachment to Ape100.
It is combination with the stand holder for back steps.
The spring used the thing for cubs.
When the stand of Ape was used as it was for back step attachment, the balance was likely to fall bad, but it was stabilized by changing into Colet.
View detail
Fits: HONDA monkey, HONDA monkey, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY BAJA, HONDA MONKEY BAJA
It is inevitably needed if a back step is attached. Since a bracket of this sort comes below a pure stand fixing position, it is cautions at the die length of a stand.
It is inevitably needed if a back step is attached.
Since a bracket of this sort comes below a pure stand fixing position, it is cautions at the die length of a stand.
View detail
Fits: BMW F800R, BMW F800R, BMW F800R, BMW F800ST, BMW F800S, BMW F800GT
Before buying it, he thought that it was high, but when thing arrived and having been seen, I thought that it was an appropriate price by the beautiful result to high-precision processing. There is no wooden-clogs function which GS often has, and the
Before buying it, he thought that it was high, but when thing arrived and having been seen, I thought that it was an appropriate price by the beautiful result to high-precision processing.
There is no wooden-clogs function which GS often has, and the bottom raising cannot make a stand almost.
I purchased in order to prevent a stand from being stuck in a ground surface, since it goes to a campsite etc. often.
Since the guide-peg area of the stand increased considerably, it was lost that a stand is stuck in a ground surface.
It can stop and place also on the ground in comfort.
View detail
Fits: HONDA Live Dio mom, HONDA Live Dio Cesta, HONDA LIVE DIO, HONDA LIVE DIO J AF35 (7.2PS), HONDA LIVE DIO J AF35 (6.3PS), HONDA LIVE DIO J AF35 (5.6PS), HONDA LIVE DIO J AF34 SR|ZS|ST|ZX|J Vehicles that comply with exhaust gas regulations, HONDA LIVE DIO J AF34 (7.0PS), HONDA LIVE DIO J AF34 (5.7PS), HONDA New LIVE DIO
I am using it for the live broadcasting DIO. Although processing of a side cover is needed for attachment to DIO, it is processible in about 10 minutes using an attached saw. Since the lowdown of RIA was carried out, the purchase of the short type
I am using it for the live broadcasting DIO.
Although processing of a side cover is needed for attachment to DIO, it is processible in about 10 minutes using an attached saw.
Since the lowdown of RIA was carried out, the purchase of the short type stand was also considered, but in my case, it was satisfactory in the usual side stands.
It is RAKU that can save the time and effort which uses a center stand in the case of parking more than imagination.
It is a recommend!
View detail