Reviews
Rearward visibility increases, but ….
The Good
Good about quality and texture.
The mirror surface is easy to see due to its reduced glare and large area.
[Not so good].
Too concerned with Design, it looks lumpy and sharp.
Anyway, it is heavy.
The angle adjustment of the Body section is subtle and difficult.
I have now returned to NORMAL because of the heavy handlebar area, but I would recommend it to anyone who wants a wider rearward view.
View detail
Impressions after 9 months of use
I like the design and have been using it for 9 months.
First of all, the paint was not applied to the edges of the Mirror when it was not used immediately after opening the package, and the surface was visible. However, after driving for a while, the turner part of the Left Side loosened and the Mirror moved at about 80km/h. I was afraid that I could not see the left rear side of the car at all on the highway. I was afraid that I would not be able to see behind the Left Side at all on the highway, and as long as the Mirror does not move, the visibility is good, but since it moves while driving, the function as a Back Mirror cannot be demonstrated 100%. I think it can be used without any problem as long as you don't touch the Mirror at about 60km/h in town driving.
I like the design.
View detail
It was damaged.
Blister pack of Mirror packing material was damaged.
There were no pieces inside the box, so I think it was damaged during storage, not during transport.
The contents were fine, but the other party is Mirror, so please make sure you manage the storage properly. 。
I would have preferred to buy this at an actual store since the price is not much different.
View detail
As I thought.
It's nice to be able to fold it up, but the field of view is still blurry. View detail
Paint is sweet.
I think it is a good product with little blurring and very easy to see for Mirror.
I noticed that the edge of the MirrorBody was not painted properly after I opened the package, so I installed it inconspicuously. I noticed it after I opened the package, so I installed it inconspicuously and am using it.
View detail
It's like they're less flashy than they used to be.
I haven't bought one of these in over 20 years.
The bracket is thinner than the old Mirror.
I think it was a bit more Firmly.
But now is the time of harmony. There is no point in complaining.
Simple Design remains unchanged.
It's easy to see the back too, and it definitely looks good on NAKED.
View detail
Fits: HONDA CB400SB HYPER VTEC SPEC2, HONDA CB400SB HYPER VTEC revo, HONDA CB400SB HYPER VTEC, HONDA CB1300ST, HONDA CB1300ST, HONDA CB1300SB, HONDA CB1300SB, YAMAHA YZF-R3, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA YZF-R1, YAMAHA FZ-6S, YAMAHA FJR1300, SUZUKI GSX250R, SUZUKI GSX-R125, SUZUKI GSX-R1000, SUZUKI GSX-R1000
It's blurry and invisible at high speed.
It is well made and the Style is good. The style is also good. However, it is very shaky at high speed because it is heavy. The screw part is also easy to loosen. The screw part is also easy to loosen. Well, I think it depends on the type of car, but…By the way, I changed it to another company's product of Carbon, and it is not shaking at all. View detail
Cool, but...
Visibility isn't bad, Design-wise, but the neck is lurid.
It's not so bad that the angle changes while driving, but to be honest, it's a pain to have to adjust the orientation every time you hang or remove the Cover.
View detail
I can not fix it.
When the Fixing Screw on the back of Mirror instantly repeats slackening and tightening, Screw on the Mirror side will be broken.
The root of the Mirror shaft is also loosening soon and the Mirror turns downward while driving.
At first it was One Side, but after two months Both Sides did not become usable but changed to another car OEM Product.
View detail
Well
BALIBALI Look at the legendary CB child wearing it
I have longing for Napoleon OnMirror, realizing my longstanding dream
I finally wore it, Mirror from a certain speed range
Beaten by arbitrage (Angle changes) Thing turned out.
It's a tiresome Mirror that has to rectify the angle one after another
It turned out.
You can improve by bringing the Mirror surface to the inside more
It may be, but the visibility got worse and the meaning disappeared
That's right.
I evaluate it as Foldable, but if it collapses with wind pressure
It makes no sense.
(Foldable part (Screw with Cover) Do not touch
It is also written in the Instruction Manual so it can not be adjusted. )
View detail
I purchased but could not install.
I think that it is a good product as a product.
I like the part of Plating, but unfortunately I could not install on my CB.
MirrorBody is Opposite Thread Screw, but the item was made with Normal Thread Screw and it could not be installed.
Unfortunately this time, though only my judgment, I judged with two stars
Because the product never has a problem, those who are purchased from now will not be misunderstood.
Because it is my judgment mistake to the last.
In the item called compatible model
I would appreciate it would be nice if you would like Manufacturer to wish you to specify a conforming model in more detail without writing only with Universal.
View detail
Rusted right away
I got scratched when OEMMirror of GSR 250 got stuck up and tried to purchase thinking that it might not be able to heal slightly vibrating afterwards.
Although it looks better - - -
First of all, the vibration deteriorated more than the OEM, it was difficult to see it already blurred at the time of Idling, it was impossible to confirm the backward direction as soon as I ran.
After that I installed Rust in many Bolt in about a week.
It was disappointing although I liked it because it looked good for the price.
View detail
Design only
It is considerably heavier than Normal mirror. Therefore, SelfStir becomes Large at low speed. I think that only Design is better than Normal mirror. View detail
I used a 10mm->8mm adapter for a Cub. The quality, especially the coating is great. It hasn't rusted although it's been left 5 years out in the rain. However, the inner side will rust. I couldn't remove adaptor from the mirror because of the r
I used a 10mm->8mm adapter for a Cub.
The quality, especially the coating is great. It hasn't rusted although it's been left 5 years out in the rain.
However, the inner side will rust. I couldn't remove adaptor from the mirror because of the rust.
I used a large wrench to remove it but it required quite a bit effort.
Now I now why some second hand mirrors are sold together with adaptors.
You can see how much rust I'm talking about from the picture.
I scraped off some of it but it still looks awful.
The reason why it gets so rusted is because the screw hole faces upward and has a dead end.
Water will enter screws even though they don't seem to have any space.
I advise you to coat them with highly rustproof anti-seize and urea grease before you insert them.
I'm satisfied with everything else except the fairy high price.
I don't need two. I wish they were sold individually.
View detail
It bound tight ordinarily on the occasion of attachment, having applied it.Since the Mirror ran by vibration when run, it bound tight strength this time.When it checked since the Mirror became downward violently while running several days afterward, what
It bound tight ordinarily on the occasion of attachment, having applied it.Since the Mirror ran by vibration when run, it bound tight strength this time.When it checked since the Mirror became downward violently while running several days afterward, what and right and left are into a foundation portion.The crack is contained, or it does not dress but uses by the quick-drying glue and the Vinyl tape, repairing.
Is it such a thing?
View detail
Since a form was pleasing, it purchased. If it uses in several years, rust, such as a portion of a Screw, is conspicuous. Although it was another into the portions of , therefore the Screw of attachment, the lid was purchased into them and it c
Since a form was pleasing, it purchased.
If it uses in several years, rust, such as a portion of a Screw, is conspicuous.
Although it was another into the portions of
, therefore the Screw of attachment, the lid was purchased into them and it corresponded to them, I last long not much and think that it does not seem to be.
After
, since the portion of a Mirror is somewhat small, back is hard to see.
View detail
If it puts into the hole of the Mirror which something removed, a Size will somewhat be too small and will fall out immediately.
If it puts into the hole of the Mirror which something removed, a Size will somewhat be too small and will fall out immediately. View detail
Although it was liking by the impression by which whose styling compared pure, some blurs by vibration in a high rotation area became Massey, and also settled shapely, it rode about three months and returned pure. Back visibility is too bad. It is
Although it was liking by the impression by which whose styling compared pure, some blurs by vibration in a high rotation area became Massey, and also settled shapely, it rode about three months and returned pure.
Back visibility is too bad.
It is impossible, although the kana which gets used was thought when having ridden.
A car is, if it turns round by lane change etc. while thinking that a car is not back although there was no scene where the danger electrical was felt and running, in fact, there will be a scene where he could not only see, plentifully and I will think whether to be based also on the physique, but I think that it is not suitable for town riding.
Incidentally it is 173-cm what is called a standard type 65-K.
View detail
Since the strange mirror was looked for, it purchased, but back cannot be easily seen somehow in whether my physique or motorcycle suits. Even if adjusted with whether an angle is bad, it was useless too.
Since the strange mirror was looked for, it purchased, but back cannot be easily seen somehow in whether my physique or motorcycle suits.
Even if adjusted with whether an angle is bad, it was useless too.
View detail