Reviews
The product itself is 4 stars.
I have few complaints about the product itself, but I do have a complaint about WEBIKE.
*In the unlikely event that a footpeg is damaged due to a fall or other accident, Product Contents can be purchased as Repair Parts.
is stated in the product information section, but since the products purchased from WEBIKE could not be registered with YOSHIMURA OnLine, we cannot purchase the main parts that might break when the product stumbles. If it stumbles, we will have to repurchase the entire product.
As for the product, I am concerned about the poor return spring on the Brake lever and the price is high for a BABY FACEBrand. I am satisfied with 4 stars for the product only.
The only differences from BABY FACEBrand are color, footpeg shape, and heel plate shape.
I would recommend BABY FACE to those who are not particular, but I am satisfied with my purchase because I adore YOSHIMURABrand, even if it is expensive.
View detail
Fits: その他 (For TMR carburetor)
Used for BST36
I used it on a BST36 and it was a little too long.
It's for TMR, so maybe it's just fine there.
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Resonates badly above 150kmh
Wanted it for a bit of trackday work. Makes the bike unrideable. Resonates left an right. The faster you go the more movement you get. If you like your screen moving an inch left to right in increasing frequency, which causes your helmet to do the same thing than this screen is for you. 2mm is to thin. Ok below 100kmh. View detail
Smaller than expected.
Complete lack of confirmation on our part, even though the dimensions are listed.
A 21:9 portrait smartphone can just barely fit in the front pocket without a Case.
With Compact Case, it is almost hopeless.
The pocket in the back of the room overhangs.
I bought it with great pleasure as a case to store my large phone when touring, but I…...
The thing itself is well made, so I will think of another way to use it!
View detail
Fits: SUZUKI GSR750, SUZUKI GSX-R1100, SUZUKI GSX-R150, SUZUKI GSX-S150, SUZUKI GSX-S750, SUZUKI GSX400 IMPULSE, SUZUKI V-Strom1000, SUZUKI Gixxer SF250, SUZUKI GSX-R125, SUZUKI GSX-S125, YAMAHA XMAX250, SUZUKI GIXXER250 SF, SUZUKI GIXXER SF250, SUZUKI V-Strom250, SUZUKI GSX250R, SUZUKI GSX250R, SUZUKI SV650X, SUZUKI SV650, SUZUKI V-Strom1000 XT ABS, SUZUKI V-Strom1000 ABS
grow dull in color (colour)
Installation is easy as it simply replaces the OEM Product.
I know it is an Anodized process and will deteriorate,
Six months after installation, this is how faded it is.
It was very disappointing.
View detail
Fits: HONDA Super Cub C125, HONDA Monkey125, HONDA GROM, HONDA GROM
Screw accuracy is low.
The Camshaft SprocketM8 Bolt's screw groove was not precise enough when installed, so I purchased an M8Tap separately and managed to clean the screw groove and install the bolt. View detail
Fits: HONDA CB1100F, HONDA CB400FOUR, HONDA CB400FOUR, HONDA CB400FOUR, HONDA CB750F, HONDA CB900F, KAWASAKI GPZ900R, KAWASAKI Ninja250R, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR400 χ, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR750, KAWASAKI ZRX1100, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZZR1100C, KAWASAKI ZZR1100D, KAWASAKI ZZR1200
The diameter of the attached O-ring is different.
XJR1300, but the diameter of the attached O-ring (FilterCase side) is different.
We had to reuse the old one. I am attaching a picture.
Please take care of quality control.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI Ninja ZX-10R, KAWASAKI Z900, KAWASAKI Ninja ZX-6R, KAWASAKI Z650RS, KAWASAKI ELIMINATOR, KAWASAKI Ninja ZX-4R SE, KAWASAKI Ninja ZX-4R RR, KAWASAKI Ninja ZX-25R, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Ninja400, KAWASAKI Ninja250, KAWASAKI Z400, KAWASAKI Z250
Feels cheap, not the best finish.
About quality and texture - not the best quality for price. About the feeling of use - feels ok Cost performance and comparison with other products - Too pricey. View detail
A little cheap.
The fabric seems to be hard and thin and of cheap quality, and since it is a brand T-shirt, it would be better to use a smoother, higher quality material. View detail
Fits: SUZUKI GSX-R125, SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI GSX-S125
YOSHIMURA YOSHIMURA machine bended GP-MAGNUMCYCLONE
The picture of the product introduction was SatinFinish of Stainless Steel, but when I received it, it ended up being Stainless Steel.
You're right about the part numbers.
Enough said, I want you to get that exactly right. Laypeople don't understand.
View detail
Shape.
The R shape of the sticker is smaller than that of the SEA BASS 17in. but I can't stick the sticker on the 17in. because the material of the sticker is hard like metal sticker. The cut of the sticker is also bad, and about 3 stickers do not come off from the backing paper cleanly. View detail
This is Small rhino
It's my fault for not looking at the size, but after putting Cigarette and lighter in it, it's too big to fit anything else. What am I supposed to put in this? View detail
Fits: YAMAHA YZF-R6, YAMAHA YZF-R1S, YAMAHA YZF-R1, SUZUKI GSX-S1000, KAWASAKI Ninja ZX-6R, BMW S1000RR, BMW S1000R, KAWASAKI Ninja ZX-4R RR, KAWASAKI Ninja ZX-4R SE, SUZUKI GSX-S1000GT, KAWASAKI Z650RS, KAWASAKI Ninja ZX-25R, SUZUKI GSX-R1000R, YAMAHA YZF-R1M, SUZUKI KATANA, SUZUKI GSX-R1000, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-S1000F
Quality not good for Yoshimura
Disappointed in the quality of finish on this stem nut... Even more so when you consider it is Yoshimura, which is known for it high quality of manufacturing and finish. Hopefully just a one off. 5 stars for the webike team for resolving the issue I had with the received item... Thank you View detail
Hurdle expensive to put up as DIY
I saw a Mirror style Rim sticker on the street that was good for Parenthesis, so I introduced it.
I bought it because it is YOSHIMURABrand and I had high expectations, but there was an unexpected pitfall…
First of all, it is difficult to paste.
This may depend on the size of the wheel rim and the presence of coating, but it is very difficult to apply and does not stick.
And although this is a quality issue, there were many areas where the cutting was not done properly and the MirrorMaterial peeled off.
At first, I pasted it all up, but the result was, well, terrible.
Even I, who am used to attaching stickers, can see the results, so it may be tough for beginners.
If possible, you should pay Shop to do this work. The price is also high, so if you are afraid of failure, you should ask Shop to put it on.
Looks great! If you can put it up well, you will be very satisfied.
View detail
It's subtle.
Water and dust inside due to removal and installation of Meter visor.
Two types of hexagonal head are required for installation (not often seen in Size
There was one part of the installation that I didn't understand.
To align the screw holes, it is necessary to apply force to the Shield to push it apart.
I bought this one with a high Net rating because it is an unpopular car and there are only a few parts available.
Universal Product may be worse, but at least this one is not worth paying 30,000 for.
It is good for about $15,000. I would not buy it if I could start over.
View detail
Fits: SUZUKI GSX750E, SUZUKI GSX1100E, SUZUKI GSX400S KATANA, SUZUKI GSX750 KATANA, SUZUKI GSX1100S KATANA (KATANA), SUZUKI GSX400, SUZUKI KATANA 1135 R YOSHIMURA ALL MODEL
Paint cracks.
As per Instruction Manual 6 N/m】 【6 N/m This is what you get when you close with View detail
Fits: SUZUKI GSX-R1100, SUZUKI KATANA, SUZUKI GSX250R, SUZUKI GSX-S1000F, SUZUKI GSX-S750, SUZUKI GSX-S1000, SUZUKI GSX-R750, SUZUKI GSX1300R HAYABUSA, SUZUKI GSX-R600, SUZUKI BANDIT1250 ABS, SUZUKI GSX-R1000, SUZUKI B-KING
Cannot Recomendation
As I tighten it, I have a feeling that it will come off and Torque management is difficult.
We were concerned and brought it to SEA BASSWorld and received similar feedback.
Personally, this is not a product I can RECOMMEND.
View detail
Size feeling did not match.
I bought it because I thought it would fit quite well based on the reviews.
It goes in quite well when removed from Waist.
LongWallet I could not get the glasses Case out of Waist while it was still attached to Waist.
The belt is quite long, so it would have been better if the belt fixation was a fixed type instead of a slide type.
View detail
Not at all obvious.
It is not noticeable at all with the cell phone Holder, so I might as well replace it while I'm at it. Parts of the "just a little bit".
It's for looks, but it's really LARGE!
View detail
extremely thorough, focusing on even the finest of details
Since it is an overhaul kit, I would like to change all the O-rings.
I would like to see Spigot's O-ring and Vacuum nippleCap included in the Kit.
Hopefully, a Needle valve assy will be included.
View detail