Reviews
I'm happy with the sound, but...
The welds are too loose and the lids come off quickly. View detail
Fits: YAMAHA XJ400, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJ550, YAMAHA XJ400, YAMAHA XJR400
Packing too thin
Two of the four sheets ripped easily when I took them out of the bag. I used the 2 that were usable, but no leaks. 。 If you open the Float chamber for the second time, you might burn it? View detail
Fits: KAWASAKI For vehicles equipped with TMRSingle|Multi each Small body|Large body(Φ28-Φ41)
distortion
I used two of them, including a spare, because they were cheap, but they were distorted and difficult to use.
After all, we use OEMs.
View detail
It was Yellow Bulb.
It is worth the price. Not bad, but it had a Yellow Bulb.
I don't care if it's Yellow, Purple, Pink, Brown, or Black. No, I don't like Black. I cannot see.
I wish I had specified it correctly. I can't believe they sell this stuff on Webig! I had to check three times to see if it came from Amazon.
View detail
Is it cheap enough?
I bought it at a good price because the Lever area was getting a bit worn out.
Installation is easy as you just remove and replace it.
The problem is when you take it out of PetitPetit.
From the moment I opened it, there was a Wound in Lever's grip, and when I looked at the back, there was a spot where the base of the genus Gold was showing.
The paint is sparse and the visible area around the Mirror installation is crumbly and muddy.
Even though it is made overseas, TensionDown from the moment I saw it.
Is it called Short Type? Is it? The grip is shallower than the OEM Product I have been using.
I turned the adjustment screw a lot and finally completed the adjustment.
It's fine for use, but it's worth the price.
View detail
Shoddy stuff, I mean.
During the last screw-tightening of the car body installation, Bracket was torn off from the base! View detail
extremely vulnerable
The whole thing is thin and weak I didn't use it much and it cracked after about a month When I repurchased the same one, I screwed the Grip in with the collar on the Handlebar Dara, I cracked up
Even though it's cheap, I can't use it if it's this weak
View detail
Fits: HONDA CB650, HONDA CB750F, HONDA CB900, HONDA CB1100F
You can use it for now
I think it's thinner than OEM
It flips over when gasoline is attached (Rounding up.)
It's not leaking and can be used if you are careful when installing it
Could it be that you're taking into account that it's getting old and expanding?
View detail
Fits: KAWASAKI ZEPHYR400, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750, Others
It leaked at 50%
There are four Float valves in it, but two of them leaked
I bought it because We-Big carries it and the price was low, but the OEM is still the best! Yes
View detail
Vietnam Biker
I bought these with some expectations after seeing those that my friend bought before me. The product I received has a good feeling of quality finish overall. The design was also nice, especially considering the price. What I found especially dissatisfied was the small spot of rust found in the surface. This occurs on 2/4 items.From experience, I can see that the longevity of these items will shorten because 01 small rust spot will cause large rust spot in short time. View detail
Cherry grip
It's a handlebar grip that puts on the handlebar Dax. Convertible to use for Honda Chaly, basic pattern, normal, can fit But when I touch, I feel that the texture is quite hard, not soft. A hand strap that removes the dax hand. I used to put honda chaly. Basic pattern can be fit. I feel that the meat is quite soft, not soft hands.(translated by Google Translator) View detail
Fits: KAWASAKI Z750-D1 (KZ750D), KAWASAKI ZRX400II, KAWASAKI ZRX400, KAWASAKI Z750 A4
cheap…
It's longer than the OEM, so it's going to rise, but I wanted to make it look like Tank Separated Type ... but I chose this because the cheap disposable was not OHLINS or luxury goods.
Anyway, it is cheap, so performance can not be expected ... But I can use it properly.
As a problem, I am planning to set it up, but Quantity : Pair (for Left and Right) Balance of Damper is not well decided and it feels blurred while driving.
I think that I will improve it if it is decided properly ... It seems to be a bit cumbersome yet. Stopper is also somewhat loose, easy to turn around ....
Also, when installing, Color accuracy is bad or one side does not fit well and diverted old parts or slightly distorted Quantity : Pair (for Left and Right) There are subtle differences in height, so that only one side interferes with the exterior, and Spring is bent and attached in various ways.
But I like the color scheme very much.
View detail
Originally, in order to pay HIDLight supplements, purchase.
BREVA 's OEMHeadlight is difficult to see because High beam diffuses, supplementary notation of HIDLight 35 W (Igniter, Control Unit, etc.) In order to pay, OEM light case Small, so purchase, purchase.
Although the exterior appearance is good, although the high beam side is not yet, the irradiation range on the Low beam side is narrow and it is reasonable.
Also, for Left-hand Road, there is no Lens cut on the Right? To use it for a motorcycle with a car inspection, I'm concerned about Pass.
How much is Universal's Round TypeLight case, Quantity : Pair (for Left and Right) There is no even Screw of optical axis adjustment of what kind of thing.
View detail
Speaking of being able to use it can be used ...
Photo Right CHERRY (Already used) , KEIHINOEM Left additionally purchased.
The first insertion was also hard, I felt it hard when pulling out, but the accuracy seems to be bad.
For setting change, if you try to replace with a radiopen ....
Since we purchased multiple sheets, we used it as a disposable every time we changed the setting.
As you can see the shape itself is somewhat different, the material itself is not confirmed but I feel different.
OEM purchased additionally can withdraw well well, and withstands repeated use many times without becoming useless.
Originally it is not a high part, so I wish I had made it an OEM without making a mistake.
View detail
Bracket breaking
As everyone is written, Bracket breaks. I also broke when I installed it. It is only the end that can be broken by wind pressure even while driving.. I think it is good to purchase Bracket separately because the shape is not bad and the price is also Reasonable.
And I tried removing Lens and Valve entered Socket? Already Rust.. I think that there is no problem in use, I think.. In other words, it is suitable for the price.
View detail
Position is good only ...
I thought about exchanging from Separate handle to Bar handle, "Low and narrow" Based on the theme, HURRICANE's Continental handle type 2, Fana TEC's LOW bar and suffering, I decided this Handlebar.
The real thing was glossy like the picture, somewhat cheesy, Knurl processing was sloppy, it was a suitable substitute for the price. Even after installation, the Switch box was spinning around its parts precision (Switchboard's Petch is completely bad I myself ...)
It is a bit disappointing that the shape of the bar is almost ideal.
View detail
Fits: KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI GPz400F/F2, KAWASAKI GPZ400R, KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750, KAWASAKI ZRX400II, KAWASAKI ZRX400, KAWASAKI D-TRACKER, KAWASAKI ZRX1200, KAWASAKI 250TR, KAWASAKI ZRX1100
CVK Carburetor setting
I bought 4 pieces for my car ZEPHYR 750 Carburetor setting. 1pc. At the time it reached it was deformed and there was something like Wound and I noticed it after decomposing carburetor, so I used it for the time being, but Gasoline got stained and got stuck out. Although there were no other three problems, I think that it is a good product if it becomes possible to use it with confidence, such as making strict inspections a little more.
Packingetc. With this type of product, it seems that there is a win / loss, it can not be said to be a reliable item and even if the price is cheap it can not be used with confidence. Considering the trouble of disassembling the carburetor many times, it may be better to use the OEM Product?! I hope the quality will be improved in the future.
View detail
Depending on compatibility with Blinker
Honesty Relay has been replaced for LED, but I did not need it, but I purchased it with expectation for 50 Valve 's.
However, it was incompatible with Blinker I installed. (It is not an OEM)
I think it is because Lens is a flat surface, but as you can see when blinking, as shown in the photo, only the LED part will appear to shine.
I see only that part shining when I see it at a distance.
If Blinker who has Cut in Lens will be a better way of looking.
I do not know the durability because it is this price with Relay and Set, but I think it would be great if you compatibility with Lens.
☆ In the sense that the two were incompatible with yourself.
View detail
As I expected
Float packing is quite Small as other people are prefixing.
Since the accuracy of other parts also became uneasy, I re-ordered Packing class and Float valve again.
View detail
Brightness is subtle
There is no manual but Wiring is easy. It seems to be made in China.
Material : Because of Lens of Plastic there is no luxury feeling. I wish it was Glass Lens.
Passing can be done at the time of the extinction and the position, but it became impossible for some reason at the time of the low light lit.
Ika Ring The five LEDs in the middle row and the row of the trendy line are innovative and I like it.
LEDBedLight is still expected from now so brightness is subtle. Well it's okay because I only ride in the daytime.
View detail