Reviews
Fits: INDIAN MOTORCYCLE SCOUT SIXTY, INDIAN MOTORCYCLE SCOUT
dirty
I thought it was Garbage, which is too dirty both in Package and inside.
It was a pain in the ass to return it, so I polished it myself for about an hour.
To the extent that it can be put on, I made it Beauty.
If it's this dirty, I'd rather buy it used and cheap.
View detail
It didn't fit.
I bought it because WeBig says it fits New Model from 2023,
Could not install.
I checked KIJIMA's Homepage and it was 2023 - not compliant,
View detail
Fits: SUZUKI Across, SUZUKI Across, SUZUKI Across, SUZUKI Across, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT400, SUZUKI BANDIT400, SUZUKI GSX-R400, SUZUKI GSX-R400, SUZUKI GSX-R400, SUZUKI GSX-R400, SUZUKI GSX-R400
Lowest
The product was guaranteed to fit but could not be installed. View detail
Fits: KAWASAKI ZRX1200, KAWASAKI ZR-7S, KAWASAKI ZR-7, KAWASAKI Z750S, KAWASAKI Z1000, KAWASAKI ER-6n, KAWASAKI ER-5, HONDA CBR650RA, KAWASAKI Versys 650, KAWASAKI Ninja ZX-6RR, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja ZX-14R, KAWASAKI Ninja ZX-14, YAMAHA FZR6, YAMAHA FZ6R, YAMAHA FZ6, YAMAHA FZ10, YAMAHA FZ09, KAWASAKI Tengai, KAWASAKI ZRX1200 DAEG
Be careful and read before you buy this.
This grip could not fit to your motorcycle. Even if the product describes you can use this, it may not be on your bike. I got one cuz it was supposed to fit my bike but it didn't. so I asked it seller(the brand Kijima) and they replied that 'This item is not compatible with Eliminator 450. Eliminator 450(US imported version) and Eliminator 400(Japanese domestic version) are completely different motorcycles. So I asked about the dimensions of the handlebars to official Kawasaki global and they replied 'The diameter of the EL400's handle bar is same as that of EL450's.' I sent this reply to the seller and got the reply 'The compatibility information on our website states that it is universal. Therefore, some processing may be required. Please understand that if a customer buys the wrong item due to a confirmation error, we cannot accept returns / refund.'. When I received this message, I gave up to claiming it and decided never to buy anything from Kijima. View detail
Fits: SUZUKI Across, SUZUKI Across, SUZUKI Across, SUZUKI Across, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT400, SUZUKI BANDIT400, SUZUKI GSX-R400, SUZUKI GSX-R400, SUZUKI GSX-R400, SUZUKI GSX-R400, SUZUKI GSX-R400
It was useless.
It was guaranteed to fit the gs125e, but the size did not fit and it could not be installed.
I offered to process the return, but at first they tried to process the return for my convenience.
After that, the return was processed as a warranty of conformity. I looked for alternatives, but there weren't any." But that was not the case,
I looked up the model number of the Clutch lever myself, and found that webike handles the OEM Product. You didn't look for it?
I purchased that one and installed it, and of course it was installed without any problems!
The warranty of conformity is wrongly stated, OEM Parts can't be found, and trust is lost...
Everyone should be careful when purchasing.
View detail
I can't connect to the dedicated Site at all, so no.
If you don't improve Site, it will be useless. View detail
Poor quality
Shape Design is fine. Paint is rough and muddy, FRP is 5 times rougher than I expected. I would rather buy a more expensive one. I want to return it. I'm not complaining about the color or anything, I just wish they would have at least made the paint smooth. I am sorry. View detail
Unresponsive
Good product, but the response is not right, System should be improved. View detail
Fits: HONDA CB1100, HONDA CB250R, HONDA CB300F, HONDA CB400SB, HONDA CB400SF, HONDA CB400X, HONDA CB500X, HONDA CB650R, HONDA CBR400R, HONDA CBR400R, HONDA CBR500R, HONDA CBR600RR, HONDA CBR650R, HONDA CBR650RA, HONDA FTR223, HONDA FTR223, HONDA GROM, HONDA GROM, HONDA LEAD125, HONDA NC750X
Defective item
It was a molding defect with a tumor-like bump inside.
I had no time to return or exchange the product, so I had to go through a lot of trouble to remove the bump and install it, but I was disappointed with the quality of the product, which was less than Chinese for the good gold price.
View detail
Fits: HONDA JAZZ, HONDA CROSSCUB110, HONDA SUPER CUB110, HONDA CUB, HONDA MONKEY
Cannot be attached to CROSSCUB110 ja45.
The U-shape of the back steel plate that attaches across the Pedal from the underside is shallowly cut, so it hits the Shaft of the Pedal.
As a result, the screw holes do not match with the CoverBody and cannot be installed.
View detail
This is not Black.
It was supposed to be called Black, but it is a dark Green color of OliveChromate. It is strange to call it Black. View detail
MeterGuard installation
I have not been able to find a store that can install the product, but I have been able to find a store that can install the product. View detail
Flashing seen installation
I asked PRO from WebigPit in to install the Blinker set along with the MeterGuard, but the joint became governor only on the front side of the Left side. View detail
Rust and peeling paint
I had them installed by Yamaha when my car was new and they rusted and the paint peeled off after about a year, even though it was not in a wet environment. Worst quality ever.
The paint is not adhered to the Gold genus, so if you scrape it with your fingernail, the paint will peel off.
Motorcycle is Polished everywhere, only this part is already dead.
View detail
design fault
As others have said in their Reviews,
The Right Side Pipe shaped fixing is 5mm longer than the Right Side,
It will not stick properly as it is.
This is also the reason why the shape is often described as distorted in Amazon Reviews.
The part of the front side that is co-tightened to the Seat fixing hole also extends 5mm outward as it is,
Bolt is not tightened normally.
If the hole on the Frame side of the APE is 5mm Offset in the Right Side only.
I can see why it has this dimension, but our 50FI is a Quantity:Pair (for Left and Right) Symmetry.
Is it different for older year APE's?
So I did a 5mm Cut on the Pipe. Now it can be installed normally,
The Carrier itself is also properly fixed to the Center.
View detail
Fits: KAWASAKI ZXR400, KAWASAKI W800Cafe, KAWASAKI W800, KAWASAKI W800, KAWASAKI KLE400, KAWASAKI KLE250 ANHELO, KAWASAKI EX-4, KAWASAKI ER-6N, KAWASAKI ER-6F, KAWASAKI ESTRELLA(disc car), KAWASAKI ZZR400, KAWASAKI ESTRELLA -RS(disc car), KAWASAKI ESTRELLA -RS(disc car), KAWASAKI ZXR250, KAWASAKI ZXR250R, KAWASAKI ZXR250, KAWASAKI ZRX-II, KAWASAKI ZRX, KAWASAKI ESTRELLA -RS(disc car), KAWASAKI ESTRELLA -RS LIMITED(disc car)
That's not the picture.
Because it is not a Power lever!
It was just a Chromium Plating product for RepairLever!
View detail
Key must be inserted and turned when locking.
I bought KIJIMA thinking it would work without any problems.
Using a key to unlock the door is not a problem.
But using a key to lock the door is also a hassle.
And there is a little HANG in the use of the key.
In the end, it was so difficult to use that I hardly used it.
View detail
Fits: HONDA Super Cub 50, HONDA Super Cub 50 60th Anniversary, HONDA Super Cub 50 PRO, HONDA SUPER CUB 90Custom, HONDA SUPER CUBC125, HONDA SUPER CUB70Custom, HONDA SUPER CUB 50Custom, HONDA SUPER CUB 50Custom, HONDA SUPER CUB 50 "Weather Child" Ver., HONDA SUPER CUB 50 STREET, HONDA SUPER CUB110PRO, HONDA SUPER CUB110 STREET, HONDA SUPER CUB110 "Weather Child" Ver., HONDA SUPER CUB110 60th Anniversary, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA CROSS CUB50 Kumamon VERSION, HONDA CROSS CUB50, HONDA CROSSCUB110 Kumamon VERSION, HONDA CROSSCUB110
short
Shorter than NORMAL, so foot placement is not comfortable. View detail
Correcting information.
I was able to purchase the product at a physical store and based on the information provided here.
2021 CB1100 (2BL-SC65) The mounting holes of Garnish did not match the shape of the mounting holes of Garnish, so it could not be installed.
Perhaps the shape of Garnish was changed during a past Model change.
The model year is 10-21, but it cannot be installed on the Second Type Model (2BL-SC65), and I think it will be an exclusive part for the First Model Type (EBL-SC65).
Products of the same Manufacturer before. (Pillion Bar) I would like to have reliable information posted on the website, as there was a similar listing error when I purchased the
View detail
I bought it because KIJIMA.
The paint on the button is rough and has a clicky, squishy feel to it. Also, I don't think it is waterproof. View detail