Reviews
I have no complaints about the product itself.
It says "for Racing Caliper" but it is Brembo brembo:20.4756.67
Please note that this cannot be used with P4-40RB CNCBrake Caliper P4 30/34 40mm.
When I purchase it and look at the Label, it says it is not available.
View detail
I will never ask again.
I had never asked for anodizing, but the corroded areas were untouched and anodized as they were. The appearance and finish looked as if it had been sprayed with matte LacquerSpray by an amateur.
I asked for this as a Large hand, but I have nothing but regret.
I personally recommend powder coating.
View detail
All Screw arrived instead of half Screw.
I ordered a 65mm to install a radial mount caliper, but received an All Screw instead of a half Screw.
When I bought the 75mm before, it was semi-screw, but, I didn't use it for Caliper installation.
View detail
Fits: KAWASAKI ZRX1200
There were no color options.
There was no color choice, so I ordered Silver Anodized Finishing, but received Black.
And the delivery time was over a week late. Even if I returned it, I had to peel off the color myself to use it because I had to wait for it to come back in stock again.
View detail
![Rear Sprocket KOHKEN Original [Color Anodized]](https://img.webike-cdn.net/catalogue/images/10646/kohken01_TS.jpg)
Fits: YAMAHA YZF-R6 2006-2017, YAMAHA MT-07 2014-2017, SUZUKI GSX-S1000 2015-2017, YAMAHA MT-09 TRACER
You turn it off when it's not good for WeBig.
Regardless of the product, you erase the text when it's not convenient for WeBig's side. View detail
![Mechanical Clutch Holder AVANZA [AVANZA] Holder Only L-34mm](https://global.webike-cdn.net/photo/impression/15/150b8287f1ad263864ff1337f0cfa4f5L.jpg)
Fits: Others
Better not to buy. Folding Type Clutch Lever that cannot be overturned
I used the Foldable Clutch Holder, and even though it says that the Brake lever for brembo corsa crota can be used, the cormorant was not able to be used. However, when I used it, it was a clutch holder which was not usable.
Quantity:As you can see in the photo of the 1pc. eye, if it collapses just a little, it will not collapse due to interference.
If it falls over, it is likely that the Lever will break or the Holder itself will be damaged.
Clutch lever will cost about 7,000 yen, but if the Holder is damaged, 50,000 yen will fly away.
It seems to be an obvious design error.
I tried to cut off the interfering part, but the other side of the cut off side was also interfering, and I gave up cutting off that side because it was the place where it would be easily seen if I cut off the other side. Folding Type Clutch Lever that cannot be overturned The product is to be used as a
I think this is a clear design error and should be recalled and replaced with a countermeasure.
We recommend that you do not purchase if you are considering purchasing.
View detail
![Mechanical Clutch Holder AVANZA [AVANZA] Holder Only L-29mm](https://global.webike-cdn.net/photo/impression/4b/4b897db4a43af4b1d6bda4fc8c484878L.jpg)
Fits: Others
What is the meaning of Retractable Lever?
I bought the brembo half lever and installed it, but the lever interferes with the holder and does not fold over, I sent it to the manufacturer for inspection but they said that is the way it is and I ended up buying the Retractable Lever which does not fold over. I think Foldable is the one that can be repaired by Lever only when it falls down. (It depends on how you fall, of course.) This is the best product I have ever purchased. It's a shame that the manufacturer didn't listen to me. If you buy it on the premise that it will not fall over, it will be good because the clutch will become lighter and the meat range will become a little wider and it will be easy to use, but I cannot recommend it. View detail
Fits: Others RCSClutch master cylinder
It's expensive stuff!
(Large tear) For the first time in years, I had to get out the Soldering iron and install it! My hands were shaking and I melted the plastic part! To top it all off, it also made contact with the Mirror cover and left a mark! It's the worst.
Now, if you're asking me if I'd recommend it to a friend... I'm annoyed at the inconsistency of having to use it, even if I have to fix it, because if it doesn't come with brembo oem, it's the only way to go!
View detail
Fits: Others RCSClutch master cylinder
No good
The look and installation was good, but after installation, the Switch snapped from the base immediately
The price is not worth it for this quality
I wasted a lot of money
View detail
Fits: KAWASAKI ZX-6R NINJA (636cc), KAWASAKI ZX-6RR NINJA (600cc) 05-12, KAWASAKI ZX-6RR NINJA (636cc) 03-04, KAWASAKI ZZR1400, SUZUKI GSX-R1000, SUZUKI GSX-R600, SUZUKI GSX-R750, KAWASAKI ZX-6R NINJA (600cc), KAWASAKI ZX-10R, HONDA CBR600 RR, HONDA CBR600 RR, HONDA CBR1000 RR FIRE BLADE , HONDA CBR1000 RR FIRE BLADE , HONDA CBR1000 RR FIRE BLADE , HONDA CBR1000 RR FIRE BLADE , HONDA CBR1000 RR FIRE BLADE
Too high
The BoltHead section is also the same thing that sells to the Home center
Cheesy
At least I want you to lose the Giza Giza position in the Head part.
I feel that it is too high.
View detail