Reviews
Cosy! Very convenient for car wash
[How I bought it]
I used to wash my car without plugging the Exhaust System because it was kind of a hassle when I washed my car lol.
But every time I finish washing the car, wipe it clean, and go home! When I turned on the engine, water that had accumulated in the exhaust system came out with the exhaust gas.
Impressions of use
I used it for the first time when I washed my car the other day and I put it on right after running it for the first time and it didn't melt, so I'm really happy about that lol. (I didn't think anything of it, I just put it on right away lol)
The size of the OEM exhaust system is large enough to fit almost any type of car.
If you are replacing the Exhaust System, you may not have enough Size for some things!
As long as it's plugged in tight, water will never get in, so you won't get your body wet with water from the Exhaust System like I did after washing my car! LOL.
It's definitely worth buying, as it did exactly what I expected it to do for about one Coin!
【Review】
Cheap and cosy!
It properly prevents water intrusion.
Complaints are not in the gain…
View detail
Easy to use
I use it when I wash my car, etc.
I've been using it for a long time and it's easy to use because Rubber doesn't harden either.
Before I bought it, I was worried that the weight would pull it off.
This is not the case, and the lid is securely in place.
View detail
A must-have at the car wash!
Prevents water from entering the Exhaust System when washing the car.
A bit of an Ideas product!
View detail
Tightly sealed
Since I didn't have a 4-stroke car wash, I had to use either a cured tape or Dustcloth when washing my YZ250FX, but the tape tends to peel off if you don't remove dirt before applying it, and Dustcloth doesn't seem to seal the car completely, so I bought this. I have used these plugs for 2-stroke DTs and knew they were convenient, but this is the first time I have used Pro grip plugs and they are very flexible and seal well. View detail
Wash for Vehicle products
The representative of the for Off-Road products that are often lost and come out sooner or later.
I bought it because I thought it would be hard to lose it with the prominent color of red and white, and it is safe so far.
View detail
Used on KTM85
I bought this for my KTM85. It fits well and doesn't fall off if there is a little bump. View detail
Perfect for the Z900RS.
It was Large sturdy without it, but now that I use it, I can wash it without worrying about it. I think it's a good cosmetic product because it will probably last a lifetime. View detail
I'll stick it in for now.
Shift link when buying "Free shipping. I bought it to make
The Motorcycle storage area is a place that gets wet during heavy rain. "I wish I had. That's what I thought. 。 When I'm not riding, I stick it in anyway. It's not raining, but rainwater doesn't seem to get in, so I think it's good. Also, what a waste of texture (laughs)! Also, the actual handle was a Red color.
View detail
Stick it in for now.
Shift link when buying "Free shipping. I bought it to make
The Motorcycle storage area is a place that gets wet during heavy rain. "I wish I had. That's what I thought. 。 When I'm not riding, I stick it in anyway. It's not raining, but rainwater doesn't seem to get in, so I think it's good. Also, what a waste of texture (laughs)!
View detail
It's stored outdoors in a 0Meter zone above sea level. ・・・・
[How is it used?
Manufacturer introduces it for the purpose of preventing flooding when washing the car, but
I bought this in case of pest infestation and flooding in the event of guerrilla rain.
Was the one you received as per Image?
YES. it looks soft and easy to use.
How was your experience with it?
The inner diameter of the silencer end of the KERKER made by Moto Liberty was 31.5mm.
The size I chose is S Size and it says 15-38mm inside diameter. I'm sure it varies from person to person, but the most large part of the end was 41mm.
[Points to note]
In comparison with the Silencer plug of the Taper shape that Unit releases. It's going to follow the internal geometry. I chose this one because I thought it would be a good choice, but it doesn't feel like it will deform inside or Seal tightly because of the small thickness of the rip part's biro biro.
How did it compare to other products?
If I continue to use it and feel a little? I'm thinking that if I feel that it's a little bit too much, I'll try the Taper shape one from Unit mentioned above.
View detail
Prevention of water intrusion into the exhaust system when washing the car
I bought this to prevent water from entering the exhaust system when I wash my car.
zx25r AXIS Lapo Japanese Government Approved Exhaust System.
Because the exhaust port was oval, it was anxious whether this product of the round form was Exactly hammed, but because the Plug part was Rubber, it pushed it in while turning, and inserted it, and actually washed the car, but water penetration could not be confirmed. It is effective.
I don't know what will happen if Level is sprayed directly with a high pressure washer, but I don't think I'll do that, so I don't think it's a practical problem.
The handle seems to be weak as a point of concern. At the time of actual pulling out, I pulled out holding the thick side of the Plug which protrudes from Exhaust System. when there is no protruding part with Large threshold Exhaust System, it becomes pulling out and inserting holding the handle, I think that it is a little uneasy.
View detail
Required when washing the car
I need it to wash my car when I get home because when I wash it in the car wash, water gets in! A friend of mine saw his engine not start for a while because of water in it, and it's not that expensive. If you forget it when you start the engine, it will fly away. View detail
Easy to use.
I was concerned about water getting into the Exhaust System during the Motorcycle wash.
This one just needs to be plugged in and will prevent water from entering.
The size range is wide, so it can be shared among several motorcycles.
It has a handle so it is easy to remove.
View detail
YOSHIMURA Exhaust Wash Plug
A good product for Yoshimura which is one of my favorite motorcycle brand. I used the wash plug for my Over racing exhaust on MSX 125cc. It was very convenient and easy to plug. It prevented water to go through the exhaust. After motorbike washing, i just clean it and ready to use for other time. Good product from yoshimura. View detail
Used for MAJESTYS
I finally used it to wash my car yesterday, but I was able to use the Size feeling without any problem. From now on, I can wash my car with no stress because I can do it without worrying about water getting into the exhaust system.
I'm glad I bought it
View detail
I use it as a reminder.
I use it to cover the exhaust pipe when I wash the car, remove the Exhaust System and put up the Center Stand.
The Exhaust pipe outlet and inlet were both 60.5mm, so this product will just fit.
It is not a way to wash the car with so much water, but as a precaution
I used this Cap.
Well, the lid is made so you can wash the car without worrying about water getting in.
I think it's good
View detail
Block it up while you're storing your Motorcycle
I'm using it on my Aprilia RSV4.
I'm using it as a Racer and I'm blocking it up to keep debris out of the Motorcycle when I'm storing it.
The exhaust system outlet is quite large-weighted because I use an external exhaust system, but it was just about to fit in the large of this product.
The nice thing about this product is that it has a floppy Tag, which makes it easy to notice if you forget to remove it.
There are times when I forget to use Engine and skip it. (^^;
It's Orange and stands out, so it's easy to use.
View detail
It will be a favorite
I always use it when I wash the car after driving off-road, etc. Exhaust System It keeps water out of the inside of the unit and prevents insects from getting into the unit when it's in storage It's easy to use and has no problem feeling Fit when installed Best of all, I think it's cheap View detail
I was able to high-pressure wash my off-road motorcycle!
Purchased it for an Off-road motorcycle wash for vehicle The high pressure washer was able to clean the exhaust system area without worrying about it! If you have an off-road motorcycle, we recommend you to have one! View detail
The pressure washer was able to give the car a good wash!
Purchased it for an Off-road motorcycle wash for vehicle The high pressure washer was able to clean the exhaust system area without worrying about it! If you have an off-road motorcycle, we recommend you to have one! View detail