Reviews
100% Material:Plastic
I thought it was made by the genus Gold and bought it for an extension.
It was All plastic.
If you tighten it too much, it will break, and if you extend it too far, it will just shake with the vibration of the motorcycle, so it is not recommended.
View detail
It only shakes when it is coupled.
Medium. View detail
We've lost the connection.
It has been about a year since I purchased it. I bought a new iPhone a few days ago, and when I tried to connect it via Bluetooth, it wouldn't connect …. I tried with my old iPhone, but it still doesn't connect. Even if I change the setting to AllReset, it doesn't work.
I remembered that I tried to Pairing with my friend's DT-01 about two weeks ago, but it didn't connect.
Even when you are connected, you can hear the Speaker's Quantity:Pair (for Left and Right) There were some differences and the Button was hard to press. It was nice to be able to adjust things with the Farm WearUpdate, but ….
I bought a Chinese one a few years ago for a third of the price and it's still going strong, even though I used it heavily, running in the pouring rain. The sound quality is also quite good.
ServiceCenter is also hard to Access because they are almost always working from 10am to 5pm, Monday through Friday.
I bought this because I trusted DAYTONABrand and I'm a little shocked.
Personally, I don't think I'll be buying an Income from DAYTONA for a while.
View detail
Cheap, but difficult to stabilize
I thought I could hold the four corners of the phone in place, but it was rattling.
There is too much rattle and I'm afraid my phone is going to fall out while driving.
I can't use the Tie Wrap without feeling like I have to.
There are also gaps at the top and bottom, but that's part of the structure. 。 But I think there are too many gaps.
If the Motorcycle is not subjected to sudden vibrations or shocks during street riding, is it barely usable?
But maybe I shouldn't complain because it's cheap.
I think it can be used if it is fixed firmly with Tie Wrap etc.
View detail
No heavy objects.
I bought this because I thought I could put it on the Handlebar at my preferred angle, but even if I tightened it up, it wouldn't hold the angle and would move around. Is it? I couldn't use it for what I think it's for. View detail
Screw thread does not fit. Purchase separately at home center.
The Screw Mountain is not compatible with Japan's single car.
So Screw needs to be purchased separately from Home Center.
Model:REBEL250
View detail
It was a difficult product.
On SC59-CBR1000RR, HURRICANE Clamp Bar was tightened with Mirror's Bolt inside the Screen, and MiKnowla's Smartphone Holder and Xperia XZ2 Premium were installed there.
However, because the power supply of the smartphone is SIDEButton, the screen sometimes disappears by vibration during Navigation, and I thought that it would go well if I replaced it with this product and bought it.
About this product
It was good point
The interference of the power supply Button etc. is avoided by making the slide part of this product Left Side.
enumeration
Bad point
I think that Spring is used for the Slide part of this product, but it is abnormally too strong and it is possible to use it with one hand.
When you try to install it, you can't get the Slide part so far that you think it will break your phone.
I have to push it and I am very unhappy
The slide part is strong to make the smart phone Quantity:The Clamp is subjected to an unreasonable force when it is set.
Since it is added, Damage is likely to appear in other Clamp Bar parts.
General review
If you attach it directly to the Bar handle, it may not be a problem even if force is applied to the Slide part. However, I think that it is necessary to pay attention to the pressure of the smart phone. The screen crack might happen?
I can't help it, I bought it, but if I could return it, I would feel like doing so.
In the end, if I want to use it, I think I have to use it by pulling Slide with my other hand while supporting this Smartphone Holder and my phone to lock and unlock it.
View detail
Fits: HONDA CB400 SUPER BOL D'OR, HONDA CB400 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR
14Y (ebl-nc42) It cannot be installed in
Both webike and kijima's fit table, both are wrong.
2014 cb400sb. (ebl-nc42) I was not able to install it in the
The shape of the bracket does not match the recess of the cowl.
I also contacted kijima.
View detail
Fits: HONDA CB400 SUPER BOL D'OR, HONDA CB400 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR
The fit chart is wrong. Inaccurate…?
If you're looking to buy this product a 2014 cb400sb. (ebl-nc42) If you are an owner of the "Mere Old Man", you should quit because it is impossible to install.
The product is listed as a '14 nc42, but it doesn't actually fit. If you are interested in other models "Oh, really? Please think of it as a degree.
I'll also tell them how exactly it won't stick.
In case you're wondering, my unit has no restoration history.
First of all, the shape around the bolt on the OEM Inner cowl side does not match the shape of the bracket on this product. (Quantity:1 pc. Eyes)
The width of this product is larger than that of the Inner cowl, and the bolt hole cannot be aligned even if it is aligned with the installation position forcibly while scratching the Inner cowl. (Second one)
It will come on if you bend and cut the quarry, then you should have written that it requires machining.
I bought Fender Eliminator Kit of the company before and installed it, but it interfered with Tail lens and License Plate Light, so I replaced it with Active one immediately.
I don't mean to say anything against KIJIMA, but since they have nc42 lineup, I wish they would develop more accurate products.
View detail
Not available
It does not work properly. I've sent it in for repair and they said there is no purchase history. This sucks. View detail
Fits: YAMAHA BirdCity, YAMAHA MAJESTYS, YAMAHA MT-03 (2015-), YAMAHA MT-25, YAMAHA MT03, YAMAHA Tricity155
Is it defective?
When I opened the package and checked the contents, the Silicon band attached to the Mobile Holder was on the verge of being cut off.
It's a cheap product, so I guess I'll just have to give it up as a matter of course.
It was very disappointing.
I'm not happy.
I guess it's all cheap and bad.
View detail
The worst! No-good Objection Response!
I bought the Body and the rechargeable battery, and when I charged it for the first time to use it, I found that the FULL charge was complete When I couldn't see the time measurement screen, I emailed UeBig and told them about the problem I did I explained the symptoms to the manufacturer by phone, so I'm sure the manufacturer knew about it
Webbik sent me an email asking me to send them a product to be inspected by the Manufacturer So I sent the body and batteries to them A few days later, I received an email stating that the inspection was completed and I would send them to you It contains only rechargeable batteries
Obviously, it's a Body problem, but they just sent me a rechargeable battery, and Body went away I'm done It's impossible
I've been buying from UeBig for a long time and I've never had this kind of response
Please do something about the Body!
View detail
I'm not happy about it
I don't appreciate its function as Income because it is a basic solo, but Switch, Lever The response is too bad
When the power is turned on and off, the volume control is operated by lever and AButton I can't do it because of the poor response You can use your phone's Body instead of Income to manipulate the playback controls on your phone You have to do it
You can connect to two phones at the same time, but the other person's voice sounds like it's playing Eco on both phones when you call I can't hear you
I bought it at Webig and immediately contacted them to return it within 3 days of purchase, but they were not responsive and still sending me instructions to send it back There is also no state of affairs
Although We-Big is not responsible for the product defect, I have nothing but disbelief in the way they handled it after the application Please take action as soon as possible
View detail
Bad listening
The listing is written poorly. With 1/10 of words and proper grammar, you could provide much more detail needed to buy this product. View detail
Be careful when you remove it
After installing it, it was too spinning and unstable, so I loosened it up to try to take it off … only the Nut mounted on the back drops to the ground from within the Center bolt
Only the rubber remains in the bolt and cannot be taken out It is not possible to use it anymore
The description does not allow you to inject into the center bolt However, if you cut it into smaller pieces, it will spin around
I had no choice but to buy a different Base and use double-sided tape and Tie Wrap I use the top portion of the system in a fixed position
View detail
nowadays
I don't think this is the right build, it was painted without any post-treatment after removing BALI and PRESS I ordered it for touring from next week I don't know about painting, but I'm not sure if you can paint without treating BALI or punch marks like this, and you're not going to be able to do it I'm sure it will come off soon It's a terrible product for the first time in a long time; GIVI, KRAUSER, SW-MOTECH, etc., etc., overseas This is the first time I've purchased this type of product before and it's the first time it's been bad I really want to return it, but I have to use it because I have plans for next week Really disappointing product View detail
Fits: YAMAHA BirdCity, YAMAHA MAJESTYS, YAMAHA MT-03 (2015-), YAMAHA MT-25, YAMAHA MT03, YAMAHA Tricity155
It's broken
The part that holds the phone down broke right away
I'm not buying again
View detail
We've dropped out
The most important pedestal is the Material:It's only weak because it's Nut embedded in plastic products! And since it's a W-series Screw and Motorcycle product, I'd like to see them use the M-series at least
I've tried a few different types of Clamp
The Screw part is weak to vibration, so it may come loose in a short time, fall off, or lose its angle should not..
View detail
The Concept is outstanding! But the quality?
I think it's great that they are available for each car type so I don't have to worry about installation
Because the bar can be moved freely, there is a high degree of freedom in positioning
Concept so far has been good, though
First of all, the Screw to fix the Clamp to the Bracket does not go in straight, so it is not possible to fix the Screw to the Bracket at any place Even if I tightened it up to the point where I could not secure it firmly
In that case, the paint on Bracket and Clamp came off
I thought it was defective and asked the manufacturer via Webike to replace it, but
Original text below
=============================
Thank you for your help
The vehicle you inquired about is a compatible model
The content of your inquiry
The lower part of the clamping area is not processed roughly and cannot come into contact with the bracket in a straight line
Screw does not go in straight because the screw hole under the clamp is distorted
That's why the included WasherQuantity:It is not possible to fix the Clamp section to the Bracket section with about 1pc
We have verified the images with respect to the fact that the product is within the product tolerance
The paint on the Mirror Bracket section peels off easily during installation
This depends on the customer's method of installation and use
You've contacted us to request an item exchange
The products we have in stock will be similar in quality, so we will not be able to offer you the same
We do not believe we can provide products that will satisfy our customers
It is possible to return the product
Thank you for the above information
==============================
I received a reply, "I'm sorry, but I have to return it
The range of product tolerances is so wide that some of them cannot be used in fact only with Included Parts:How is it that there is?
View detail
Pictures are different
Mounts that are completely different from the posted pictures will arrive (Type stopped at Belt)
If you do not like it, it is that the return fee is borne by the customer and returned.
Please be careful who you buy from now.
View detail