Reviews
It's a consumable part, so it's better to have a spare.
I bought this as Repair Parts because my Ultra heavy bar end Sleeve was cracked and deformed.
The width of the car is not quite enough, so I have to move the Bar End to widen it, but every time I tighten it again, it gets deformed. Originally, once it is installed, it is not likely to be removed, but I guess it is rare when the car is inspected.
Product Evaluation
This product is a thin synthetic rubber tube, which is used as a friction material between the aluminum sleeve and the pipe handle.
Due to the nature of the rubber, if you tighten it, it will crush and stretch, making it sticky.
The outer diameter of the Strap bar is very close to the inner diameter of the Handlebar, so if it is stretched, it will not fit in the Pipe handle and cannot be assembled.
I take it off and put it back on, so I stop tightening the bolt when it stops working because I don't want it to get crushed, but even so, it will last 3-4 times.
Installation
When you buy this is when the one you were using is ruined, so it is quite deformed, but when you disassemble it, it is better to buy it in advance on the premise of basic replacement.
The first one is not crushed, so if you don't hook it, you will be able to put it in Smooth.
If you have difficulty, you can apply a volatile cleaning solution (Parts cleaner), etc. to make it easier to slide in.
Never put oil on it, it is a friction material and it will slip and not stop and the Bar End itself will fall out (I did that once).
View detail
I like that it's out as Repair Parts.
The width of the car is not quite enough, so I have to move the Bar End to widen it, but every time I tighten it again, it gets deformed. Originally, once it is installed, it is not likely to be removed, but I guess it is rare when the car is inspected.
This time it was cracked and broken, so I replaced it to bring it back after the inspection.
It is a good product that can be repaired because Repair Parts is out as Lineup.
In addition, I can use it for a long time because it is not discontinued though a lot of years have passed since it was put on the market.
I was worried that I should replace the Heavy weight bar end because the similar product of Heavy weight bar end is out from DAYTONA, but I decided not to replace this Repair Parts because the price setting is cheap.
Product Evaluation
It's a pity that this product is made of aluminum and is easily deformed due to its thin thickness, but it seems to be an unavoidable design in order to follow the surface in the Handlebar.
About installation
When you buy this, it's when the one you were using is ruined, so it's quite deformed and you'll probably struggle to remove it.
If you can loosen the bolt somehow, you can bend the aluminum sleeve inside with pliers and release the bolt.
After that, it becomes possible to restore and assemble it by replacing it.
Forced bending is likely to break, so it is better to do it with attention little by little.
View detail
Exchange with the thing damaged by the fall etc. etc.
This is for Replacement when you sadly (mysteriously) let it fall over.
Of course, you can change the color according to your mood.
The reason why I chose POSH is because the anodized finish does not fade easily.
The image shows an item that has been used for one year, but has not faded at all.
POSH is excellent.
The video will be attached to the appropriate one.
View detail
restoration of standing moss
Thank God only Gawata was out. (Polish)
You can change the color according to your mood.
View detail
Easy exchange
The paint on the original Outer Cover is peeling off.
Bought the Outer only because it looked so pathetic.
Because you can purchase a Single Item of each color Cover, you can change your preference and
Can be purchased depending on the situation, such as damage caused by a fall.
Parts are also available from Outer Cover to Bolt and Inner.
It's great to be able to exchange without having to buy everything from scratch, so you don't have to waste more stuff.
I don't remember doing anything to damage the paint at all, like falling over.
I'm not happy with the fact that the paint came off so easily, but it was easy to deal with.
This is good if you want to continue using Bar End.
View detail
Fits: Others , BMW S1000R, BMW S1000XR, DUCATI SUPER BIKE 899 Panigale, DUCATI SUPER BIKE 1198, DUCATI SUPER BIKE 1098, DUCATI SUPER BIKE 848, DUCATI SUPER SPORT 939, DUCATI CLASSIC MH, DUCATI SUPER BIKE PanigaleV4, DUCATI SUPER BIKE PanigaleV4R, DUCATI MULTISTRADA 1260, DUCATI SCRAMBLER 1100, BMW G310R, BMW S1000RR, BMW G310GS, DUCATI Diavel1260, DUCATI MULTISTRADA V4, DUCATI SUPER SPORT 950, DUCATI Monster Plus
On a long distance using the highway.
After driving 50km on the highway, I took a break at the interchange and my hands went numb … I thought it was a completely eyebrow-raising product. I think it would have been better to take it off and drive with less vibration … View detail
I used it for Baby's Bar End.
[How is it used?
I used it on a Babyface M6Bar End, Handlebar inner diameter is 17φ.
Was the one you received as per Image?
Image is nothing, it's just a tube of Rubber.
How was your experience with it?
The inner diameter is 17φ I was not sure if it would work, but I was able to twist it in and fix it without any problems.
[Points to note]
Not particularly
View detail
Fits: Others , BMW S1000R, BMW S1000XR, DUCATI SUPER BIKE 899 Panigale, DUCATI SUPER BIKE 1198, DUCATI SUPER BIKE 1098, DUCATI SUPER BIKE 848, DUCATI SUPER SPORT 939, DUCATI CLASSIC MH, DUCATI SUPER BIKE PanigaleV4, DUCATI SUPER BIKE PanigaleV4R, DUCATI MULTISTRADA 1260, DUCATI SCRAMBLER 1100, BMW G310R, BMW S1000RR, BMW G310GS, DUCATI Diavel1260, DUCATI MULTISTRADA V4, DUCATI SUPER SPORT 950, DUCATI Monster Plus
Hmmm…
I don't know if this is working or not…
Well, it's cheap, so I guess it's just a comfort.
And my hands usually go numb from spinning it around.
View detail
Measures against fine vibration in single-cylinder engines
What made you decide to buy?
The vibration of the single cylinder engine also affects the Handlebar. In addition, when waiting at a traffic light, if the front brake is not applied, the Mirror "Wobbly wobbly. I think that's how much the vibration of the Engine affects the Handlebar. That's how much the vibration of the Engine is affecting the Handlebar. I bought this to reduce the vibration.
How was your experience with it?
Before installation, when waiting at a traffic light, if the front brake is not applied, the Mirror "Wobbly wobbly. I think that the symptoms that I was experiencing are now less severe than before I had it installed.
PartsThe feeling after installation will change depending on the individual difference of the vehicle and the feeling of the user, so please use it as a reference.
[Hope to Manufacturer
The thing is that there were only settings for M8 and M5.
What is the point or hang of the installation?
This time, I bought one for M5Nut because I changed to Bar end mirror.
When I installed the one for M5Nut to the Bar end mirror, ・・・・Bar end mirror was Bolt of M6, and it was my regretful lack of confirmation. (Reflection) If this is not done, the Heavy weightNut which I purchased cannot be used. So I checked if I could change the bolt of Bar end mirror to M5, but I couldn't find M5 bolt length to fit Bar end mirror. I was about to give up on the heavy weight nut installation, when I suddenly thought that it would be possible to install the M6 Tap. I was able to install the heavy weight Nut M6 Spec. on the Bar end mirror.
View detail
Bar End for Repair
I bought this product because I changed my Handlebar. I was using another company's product, for OEM HandlebarBar End, but I could not install it as it was, so I bought this product and succeeded in installing it.
It is a special product and the fit feeling is good. It does not wobble.
View detail
Can be used with both Aluminum and Steel Handlebars
This bar end slider is zeta. 2007 wr250X was originally OEMSteel handlebar, now it is zetacomp bar. Now it is zetacomp bar, and it is possible to install it with either handlebar because two kinds of Adapters were attached. View detail
Easy installation on Bar End equipped vehicles
I installed it on my CB223S with modified Handlebar.
The OEMHandlebar has a weight built into the end of the Handlebar.
After changing to Other Brand Product's Aluminum Handlebar, the vibration became worse.
Decided to install.
I installed it in conjunction with the Handlebar Brace.
The difference between before and after use is that the experience is a little better?
It was a degree, but the image of VideoCamera fixed to Handlebar was
It's suddenly much easier to see (not perfect), so the effect is definitely
I think there is.
View detail
Fits: Others , BMW S1000R, BMW S1000XR, DUCATI SUPER BIKE 899 Panigale, DUCATI SUPER BIKE 1198, DUCATI SUPER BIKE 1098, DUCATI SUPER BIKE 848, DUCATI SUPER SPORT 939, DUCATI CLASSIC MH, DUCATI SUPER BIKE PanigaleV4, DUCATI SUPER BIKE PanigaleV4R, DUCATI MULTISTRADA 1260, DUCATI SCRAMBLER 1100, BMW G310R, BMW S1000RR, BMW G310GS, DUCATI Diavel1260, DUCATI MULTISTRADA V4, DUCATI SUPER SPORT 950, DUCATI Monster Plus
Surely the vibration is gone …?
Because of the Bar End made by Rye TEC, the dimensions do not fit.
Since there was no way to do so, we produced the color with Aluminum and installed Black Anodized Aluminum.
The feeling of using it is definitely no longer vibrating …?
( ?◊? ) ? I'm like, "W
It's not so much that it's gone, it's more like the resonant point of the Gapta.
Well, the vibration was definitely reduced at the RPMs we normally use.
View detail
MOTARD, I know you're persistent about Motocross, but it's a zeta?
This time I'm going to make sure I get a good in-person picture of it installed?
In my last post, I told you how good these Items are only in writing, but a picture is worth a thousand words?
Take a look at the images, this feeling of unity with the Grip without any discomfort and the cool appearance of the Slider.
The Potential that has the concealed potentiality exudes like SNIPER of great skill. zetaBrand is great.
View detail
Same size as the Grip diameter.
I'm using it on a 2007 wr250x, MOTARD, ZETA for Motocross.
The thickness of the slider is about 3cm, so the slider does not stand out even if you wear it, and the matte black color with the Manufacturer logo stands out very well.
We like the wr250x OEM steel Handlebar, and the good thing about the Slider is that it is available in two different materials (steel handle and aluminum handlebar) to fix either steel or aluminum handlebar.:It comes with an aluminum fixture. It is not likely to come off like the other Bar Ends when it is tipped over like the Rubber Bush. (The fixing method is the same.) I was using it heavily with Motocross and HardEnduro, but it did its job well, and it didn't come off when I fell over, and the Handlebar protected the Throttle tube and Grip even when the Handlebar bent, so I was able to survive on my own. I am a great believer in the zeta Bar EndSeries. It's probably the cheapest bar end slider on the market, but the performance is unmistakable.
View detail
Used in combination with Bar End
important item
[Was there anything that disappointed you? No
Do you have any wishes or improvements you would like to make for the Manufacturer? I'd like to get a product of the same size with a little more weight, or one with a middle joint that can be changed in length and weight.
[Do you have any products to compare it to? No
Frequently Asked Items
What made you decide to buy? price
How was your experience with it? Satisfied
Was the installation difficult? No
[Was the Instruction Manual easy to understand? Yes
View detail
Fits: Others , BMW S1000R, BMW S1000XR, DUCATI SUPER BIKE 899 Panigale, DUCATI SUPER BIKE 1198, DUCATI SUPER BIKE 1098, DUCATI SUPER BIKE 848, DUCATI SUPER SPORT 939, DUCATI CLASSIC MH, DUCATI SUPER BIKE PanigaleV4, DUCATI SUPER BIKE PanigaleV4R, DUCATI MULTISTRADA 1260, DUCATI SCRAMBLER 1100, BMW G310R, BMW S1000RR, BMW G310GS, DUCATI Diavel1260, DUCATI MULTISTRADA V4, DUCATI SUPER SPORT 950, DUCATI Monster Plus
Compact and good product
The slight vibration in the Handlebar makes my hands numb to the point that it interferes with driving operation It felt like an occult part, but I put it on anyway
Strangely enough, my hands no longer feel numb and the slight vibrations are reduced after installation
View detail
one
It was hard to assemble it to the Handlebar But it is too hard I missed it again:I didn't know it was 1pc A simple explanation is needed View detail
Now that nothing has changed, it will vibrate out again
Do you have any wishes or improvements you would like to make for the Manufacturer?
I'd like them to have more frictional power
[Do you have any products to compare it to?
No replacements available for repair parts
What made you decide to buy?
I came to discover through the improved search function of the webi that it is out as Repair Parts Hooray for Ubi!
How was your experience with it?
That won't change
It is not possible to tighten the Bolt because the Bolt and the Parts of Gold in the Bolt are dancing together The vibrations will be released without any friction from
View detail
Fits: Others , BMW S1000R, BMW S1000XR, DUCATI SUPER BIKE 899 Panigale, DUCATI SUPER BIKE 1198, DUCATI SUPER BIKE 1098, DUCATI SUPER BIKE 848, DUCATI SUPER SPORT 939, DUCATI CLASSIC MH, DUCATI SUPER BIKE PanigaleV4, DUCATI SUPER BIKE PanigaleV4R, DUCATI MULTISTRADA 1260, DUCATI SCRAMBLER 1100, BMW G310R, BMW S1000RR, BMW G310GS, DUCATI Diavel1260, DUCATI MULTISTRADA V4, DUCATI SUPER SPORT 950, DUCATI Monster Plus
Titanium Damping Parts
I didn't know that Titanium had damping capabilities to reduce vibration
I didn't know that until recently (Polish)
I have several AELLA Parts on, so I'm not particularly suspicious of them
I didn't feel much of a reduction in vibration when I drove around the neighborhood, but fatigue over long distances I'm hoping for some relief
View detail