Reviews
It's cheap and looks great!
[How is it used?
I installed it because I thought it would rust if I could see the Screw part of the Mirror.
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
We will install them together when we replace the Mirror, but it should be easy to do.
How was your experience with it?
No problems at all, it works and looks Refreshing.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None in particular. It seems to be durable.
View detail
TANAX M10 Mirror Bolt Cap
About quality and texture - Top quality. Smooth surface finish on these black plastic caps form TANAX. About the feeling of use - They fit perfectly into the countersunk allen head bolts I had fitted to the mirror mounts when I swapped from the lollipop mirrors to barend mirrors and the caps have now finished off the mirror change beautifully. Products to buy together - If you are looking to blank off the original mirror mounts you will also be wanting to have a pair of barend mirrors in your Webike shopping cart also. Difficulty of installation - A very simple installation process of just pressing them in firmly but I also like to add a little silastic sealant so they don't move over time with the engine vibration. Cost performance and comparison with other products - Extemely cheap solution to the unfinished look of having open bolt holes in your field of vision while riding. No cheaper option that I could see but plently of CNC machined fasteners at a higher cost here on Webike if you aren't happy using plastic caps. About shipping and packaging - Sea freight is my preferred shipping option and usually arrives in Australia in 6 to 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use. Any concerns, cautions, or advice when purchasing - These M10 mirror bolt cap are sized to fit into the hole on top of the bolt and not the bolt hole itself. View detail
No discrepancy, no cheapness, good!
OEMMirror→I bought this to fill the hole because I changed to a bar end mirror. It is totally textured and looks beautiful. I think the price is a little less than Friendly. View detail
It gives a bit of an off-road feel.
I also purchased Boots here while changing Mirror. I wasn't expecting much in the way of effectiveness or appearance, but I was just curious. In conclusion Better to have a little than nothing..." It feels like it is. I thought it would be a little more fit since both Mirror and Boots are from the same TANAX Napoleon product line. View detail
In Mirror hall not used by Demon150GR
The GPX Demon150GR has a rubber cap blocking the mirror hall of the M10 Standard Thread Screw, perhaps a remnant from another vehicle, and I'd like to remove it because I'm concerned about the deterioration of the rubber, but in any case I'd like to remove it so that I can use it as a press-up as well. This Mirror Hole Cover Cap is installed. Compared to the common types, the NASA TypeSeries of POSH products have a more rugged design, which I prefer, so I chose this one. I think it is better to install the cap without putting a wound as much as possible. View detail
Fits: HONDA Rebel 1100, HONDA Rebel1100 DCT, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER BOLD'OR
DAYTONA Mirror Removal Filler Screws
Daytona's products are very cost-effective, the aluminum cnc process is anodized black, and the decoration effect is very good View detail
A little small, but works fine.
Amazon. Normal Thread Screw, Opposite Thread Screw Of Quantity:I bought a set, but both were Normal Thread Screws, so I returned them and repurchased from webike.
I'm not sure if it's cosmetically sound since it's not a Large price.
If you use a bar end mirror, it is necessary to have a pure normal thread screw hole.
The aluminum seemed to deform when torque was applied, so I lightly tightened it with a ten-yen coin.
This product is sufficient because it only plugs the screw holes.
If I had to pick one, I'd say it was Exactly right if the diameter was a bit larger.
View detail
high
I bought it because I made a bar end mirror.
The handlebar is black, so choose black.
I think it's a very expensive product for the price.
Easy to lick when installing and removing with a slotted screwdriver
Don't put too much pressure on it, it will lick you in one shot.
SmallParts, but it's Exactly after Mirror.
Next time I won't buy it.
View detail
It'll make you look good!
I used it to cover the Bolt hole in my Tanax OffsetHolder! Looks like a Large thing! I didn't have the right tool on hand, so I had to remove the Mirror from the OffsetHolder.
Cap should be fitted only after the Mirror is properly angled and each part is firmly fixed! I thought the price could be a little lower. I thought it could be a little less expensive!
View detail
Don't get the OEM feeling with Bolt's Cap!
I added the Side Mirror Base and bought a special Bolt cap.
Quantity:It was 1 Set of 2pcs. (Side Mirror Base was sold one piece at a time, so I made a mistake and bought 2Quantity.:(I've bought a Set... sweat)
I am satisfied for this product.
Maybe it could be included with the Side Mirror Base! Am I the only one who thinks that? (laughs)
View detail
Fits: HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA Rebel1100, HONDA Rebel1100 DCT
Ideal for blindfolding
Black color is shiny and looks (without feeling uncomfortable) I am very satisfied with the quality of the product.
It can be installed by anyone with a hexagonal tool, as it only needs to be attached to the screw holes where the OEM Mirror was installed.
This will hide the unwanted hole from view & prevent contamination by relics.
Since it is sold as a single unit, Quantity:Pair (for Left and Right) I bought two of them at
View detail
Spec. (Dimensions of each part) I'd like you to put
When I replaced the Mirror with Other Brand Product, I used ScrewAdapter to attach the car Both Sides because of Opposite Thread Screw.
The Bracket Boots that came with the Mirror and the OEM Bracket Boots were not long enough and I felt like I just added them.
I replaced it with this Boots, and the ScrewAdapter became hidden, so I don't have the feeling that I just put it on.
The dimensions of each part of the product are shown on the back of the Package, but not in the Catalogue.
You can inquire to the manufacturer or go to the store to see the actual product, but I attach a diagram for your reference.
View detail
For Mirror removal when running Circuit
When you remove the Mirror with Circuit, you can plug the Bolt hole and also plug the Wiring hole at the same time. View detail
It's neither good nor bad
I bought this because when I removed the Mirror, the place it was attached to was awkward.
There is no problem with the texture.
It also comes with 4 Bolts so you don't have to buy them separately.
I like MORIWAKI, so I am satisfied.
View detail
Fits: HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA Rebel1100, HONDA Rebel1100 DCT
I can fill in the blanks in Stylish.
I used this bolt to fill in the female screw hole after changing to a bar end mirror, this bolt is good for tightening other attachments to the mirror. View detail
I'm glad I put it on (laughs)
I bought it for Circuit driving.
It is possible to drive with the Mirror installed, but I wanted to avoid damage to the Mirror, its base and the Cowl Bracket in the event of a fall.
I installed it yesterday and went for a circuit run, and it showed its effect on the first lap. (laugh)
I'm glad I bought it
View detail
Fits: KAWASAKI NINJA250R, KAWASAKI NINJA400 (2014-)
Fits a 2020 NINJA2 Helmet 50R
2020 NINJA2 Helmet50R (EX250P) attached to the
This is not necessary when you remove the Mirror, but it is one point.
It's a bit pricey for a Mirror Hole Cover, so I think the cost is a bit low.
It's well made, so I guess it can't be helped.
View detail
So bad
I bought it just to see the fit.
Pitch does not fit on BMW S1000R
It could not be installed.
BMWPitch1.5.
If you're considering buying one, you're in the right place.
It's a shame because it's a great looking part with good texture.
View detail
It is the same manufacturer, so the delivery is very good.
Bolt with Cap will hold water.
You don't want to see it rusting as it is often in your view.
It fits the Bolt well and the outside diameter is just right.
I think it's a little expensive for resin Parts.
View detail
Fits: KTM 990 SUPERMOTO T, KTM 990 SUPERMOTO R, KTM 1190 RC8R, KTM 950SUPERMOTO, KTM 690ENDURO R, KTM 990SUPER DUKE, KTM 690DUKE R, KTM 690DUKE, KTM 1290 SUPER DUKE R, KTM 1290 SUPER ADVENTURE, KTM 1190 ADVENTURE R, KTM 1090 ADVENTURE R, KTM 1090 ADVENTURE, KTM 1090 ADVENTURE, KAWASAKI Z800, KAWASAKI Z750 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI ER-6n, KAWASAKI ER-6f, HONDA CBR600RR
Bar end mirror countermeasure
I bought it for fixing the Reserver tank after installing the Bar end mirror.
The product Page says something unintelligible like RightHand or LeftHand, and at first I thought it was wrong.
I bought Right Screw and had to return it.
If you want to make it easier to understand for Japanese people, please write something like Left Screw or Opposite Thread Screw.
View detail