Reviews
Not too flashy.
You can casually plug the Bolt hole.
It's so plain you won't even know it's on unless you point it out.
That's a good point.
It can be installed by simply applying a cloth and lightly tapping with a plastic hammer.
I just think the price is a little high for a plastic cap...
View detail
Side color with high texture
Quantity:Pair (for Left and Right) It took quite a bit of work because I needed 12 of them in the first place, but I love the look and feel of them. View detail
It's a little pricey.
I purchased this product for my Change Accent installation.
For FI Vehicles, you will need this, but I think it is a bit pricey.
Since the parts are not visible from the outside, I don't think it's necessary to be so concerned about the finish.
It seems to be the place where the strange obsession of the area seems to be the product of Boa Ace.
View detail
Frankly
I bought these because they interfere with the exhaust guard after replacing the bore AceRear Sets. The rear brake is very good. The quality was good as always. View detail
I was able to get the same Large size for less!
As a matter of fact, when I bought Handlebar Mounting of a certain company and was installing it, I accidentally dropped the attached Spacer by slipping my hand, and I couldn't find it as it was.
I've been in touch with the manufacturer. "There are no Repair Parts. "Please look for the same shape (they did list the dimensions) in Home centeretc." The reply, I was actually a bit confused.
So, when I searched by webike when I was in trouble, I arrived at this and was able to buy it safely.
The size was also finely engraved, so I was able to procure the exact same Large size at a lower price.
They've got plenty in stock, I order and it's here the next day!
It was really helpful
View detail
I was able to chain it to a spartan impression!
I placed an order in April and it was finally delivered.
There is a note on SP Mukawa's Product Site that says Quantity:1 Set6 pieces.
1Quantity if you want to replace all of them.:2pc. SetQuantity as you need it:2 Sets are required.
The price is high, but I think it's very well made.
It's called "Aluminum Cut-out", but there is no trace of Machined aluminum, so it doesn't have Cut-out feeling.
I think you need to reconsider the Design of the extraction (the way you drill the holes for the collar).
There is one collar nail hole on the Shroud side and two on the Side cover side (plus two Others indentations).
I managed to hide the Shroud side, but not the Side cover side. Please check the attached picture.
As for the anodized processing, there is a slight unevenness in the way the color is applied. Especially the Edge groove is weak.
This is my opinion, but I think it's a dark Red with a thin layer of Anodized coating.
It would be better to take measures against UV fading just in case.
View detail
I'm trying to get Lever to stop rattling!
[How is it used?
We are playing Enduro with Off-road motorcycle.
I was looking for something like a Shim for my Clutch lever, and I found this product. And I bought it.
Was the one you received as per Image?
As per Image
Was the installation difficult?
Remove the Pivot and after cleaning, apply a thin coat of Grease and insert the Shim here and you're good to go.
How was your experience with it?
The lever that was moving up and down stopped moving and became able to cut smoothly.
I'm happy with the Large variant because of the way I run and play with the Clutch a lot.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Measure the shaft diameter of your Pivot before you buy it. I made a mistake once and bought an M6.
ZETA's Clutch perch was an M8.
View detail
It's quite noticeable.
12 pieces of both SIDE are replaced, so the price is quite high!
but I think it is highly satisfying.
View detail
Used by FI Vehicles.
Used to install the Change Accent on FI Vehicles. To be honest, I thought the price was too high, since I also bought the Change AccentBody… View detail
The finish was beautiful.
It was good because there were no things that fit Exactly.
And the finish was beautiful.
View detail
toolbox
I enjoy keeping them in stock.
We are gradually increasing the variety
View detail
toolbox
I enjoy keeping them in stock.
We are gradually increasing the variety of our products.
View detail
Finish as per image
I finished it with Gold parts on Silver body. I don't know why the standard is Lime green, but I guess I wanted to express the cuteness.
The texture, Size, and color were all as Image.
View detail
I think a little more Size would be nice.
I bought 0.3mm thick with 10mm inner diameter to improve the rattling of Chinese Lever.
The result was slightly too thick to use.
I wish there was a thinner 0.1-0.2mm
View detail
for adjustment
To adjust the brake lever & pedal place
I feel good that the rumble is at its smallest limit.
View detail
I'm glad I was able to use it.
I switched to NINJA1000sx, and when I tried to use STAND, I bought the color that fits without any research.
If you are looking for the best in the market, you will find that there is a lot to choose from.
I used it because it arrived immediately after ordering and the Size was right.
View detail
necessities
It seems expensive, but I can't do without it.
I think you should definitely put it on.
View detail
JC92 can also be used.
JC92 compliant.
It is recommended to use Rigid Handlebar to increase the amount of information on the car body.
You can also experience this with the original squishy Front suspension.
But the vibration is transmitted to Direct, so it is easy for your hands to become numb.TradeOff.
View detail
Appropriate size for Ninja1000
I bought it because the Pin supplied with the DAYTONA Front Stem Up Stand was limited to 24mm and the Ninja 1000 needs 27mm.
Of course, this product is made by J-TRIP and not by DAYTONA, so it is not a compatible product.
However, I thought that the inside diameter of a large body like this is the same as the standard! So I bought it, and tried to insert it into the smallest one of the attached pin of DAYTONA (maybe)... Exactly.
In fact, I was able to work with it in that state, but it is originally fixed firmly and used, and the strength is uncertain and may be damaged someday, so if you are poor and want to be able to make a stopgap, please do so at your own risk.
View detail
Just the right thickness
When I installed the Rear Sets, the Master Cylinder interfered with the Swing Arm and I was looking for a 3mm Spacer.
Parts mass merchandisers in the neighborhood are always 1 to Quantity:2pc. I bought this from Webig because they only had about a Set in stock and I wanted 4!
If I am not in a hurry to buy a part, I go to a mass retailer and buy it from Wehbig.
View detail