Reviews
Great Bracket
This bracket will give you the ability to fine tune where your master cylinder ends up. You can bend it slightly in multiple directions, or use if for other purposes. View detail
I think whether the price and texture are also good.
• 【What made you decide the purchase?】 Variation of price and color abundance, Length
• 【How was it actually used?】 Depending on how you bend the coating Is it a film? I thought that it cracked, but it is not worrisome.
• 【Was it difficult to install? (Hard parts case)】 Installation and bending are too easy and there is nothing special to mention ....
• 【Please tell me the point of installation and hang (in the case of Hard parts)】 It is not about hang, but repeated bending should surely break or become brittle. If it is fine adjustment Large Is it sturdy?.
• [Is there anything I was disappointed about?] It is too conspicuous because there are plenty of thickness in the hole through which Bolt passes ....
? [Hope for Manufacturer - Please tell me if you have any improvement points] enough.
• 【Have you compared items?】
• [Others]
View detail
It is as I thought.
I tried installing it and it fell into the state just as I thought. Subtle bend Length If I knew it earlier I could use it elsewhere. Manufacturer is daringly aiming to make it. View detail
Like another person
I purchased the shape well
Do you want to compromise just as good as heavier?
Do you want to replace it?
Approximately one week installing I think that it will probably be exchanged for another
View detail
Fits: HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50
Installation is suspicious
I bought this item for disc format and tried to install it myself.
First, M10 × 60's Button bolt was different from Illustration, why Screw did not turn until the end and it did not attach.
There was no problem as this was handled by phone.
For BracketBody of the essence, KICK interfered, and we coped with Kick ArmBody by cutting it.
Bolt of the Master cylinder was shorter and included separately prepared and installed by myself.
It is a bit disappointing only to Manufacturer who I trusted, but I'd like to refer to it as it is possible to install it.
View detail
Fits: Others , Others
Good Color
It was a product as I thought. There is no problem with installation and texture is perfect.
Cospa is satisfied well also in terms of price.
Image when I installed it on the car body just like I was satisfied without problems.
View detail
Fits: Others
Nice color
It was a product as I thought. There is no problem with installation and texture is perfect.
Cospa is satisfied well also in terms of price.
Image when I installed it on the car body just like I was satisfied without problems.
View detail
Good Design
It was a product as I thought. There is no problem with installation and texture is perfect.
Cospa is satisfied well also in terms of price.
Image when I installed it on the car body just like I was satisfied without problems.
View detail
Good Design
It was a product as I thought. There is no problem with installation and texture is perfect.
Cospa is satisfied well also in terms of price.
Image when I installed it on the car body just like I was satisfied without problems.
View detail
weak
Motorcycle with a lot of vibration around Handlebar, but it broke in a few days.
Design is better than NISSINOEM but strength is too much.
It is better to improve the shape without removing the meat.
View detail
Just to see goodness when looking at the hand - - -
Brake Master When changing Cylinder, my Motorcycle has purchased it for Separate handle.
There is also sufficient thickness, making it solid,
Personally I just caught sighting at the middle due to two holes, cheaply cheap (Like you made yourself with Emon) Sorry to get an impression.
View detail
There is a thing only for the car model only
Since it is a used car, there are many parts that deteriorated in many ways,
This part was sometimes included in the eyes while driving, so we aimed to improve the appearance.
Reached Big Li? (◎ o ◎) / The same thing as before!
Until the color (^ ^;
However, it may have been a good choice if we could consider the good results that we used so far.
Although it did not become Large Kima Imechen,
Together with Master cylinder cap of the company around Handlebar became gorgeous.
View detail
can not use!
I bought it for "For Separate Handlebars", but I could not use it because the angle was opposite.. I may not have read the explanation neatly, but I need an illustration to adapt to some more shape. By the way I was planning to use it for Separate handle of HURRICANE View detail
Silver Hey shovel as well - - -
I tried to make Silver from Black color of the same product.
The color tone is different from Image and a little cheap impression.
Making is solid and the accuracy of the work is high.
However, depending on circumstances, I think that it may be necessary to bend somewhat when installing, but it is thick and solid, it will be a mischief when bending.
I would like to respond flexibly to bending a bit more. If it is thinner and more resistant to vibrations, etc, will Steel and other materials be good.
View detail
The texture is good, but the price is reasonable
I used the same Manufacturer 's GALE SPEED Tank for MT - 09 and GALE SPEED, but I used the same Manufacturer' s GALE SPEED Tank, but the angle was bad and Brake hose bent and broke and could not be used! did. View detail
Even with other company's Brake master
I used it for Tank installation of OEM's NISSINBrake master.
Since OEMTank was badly positioned and difficult to maintain, it is perfectly relocated and moved in Kore..
Processing to expand the hole was necessary but it looked better as well
View detail
Fits: その他
Used to attach reservoir tank of H2 to the Radon of Flanders
【What made you decide the purchase?】
I felt like I saw it in the photo, because it seemed possible to divert it in Small processing. After that the color was Silver of Aluminum Ground. (Bracket on Clutch side is also Silver Alloy)
【How was it actually used?】
It's as if it were a finish like an OEM Parts Number.
【Was it difficult to install? (Hard parts case)】
Used to attach the Black Brake fluid reservoir tank of Kawasaki H2 to the Radarphone of Flanders. I could install it with simple processing as I expected.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Since the Screw hole of the mount on the radiapon side is 10 mm in diameter, according to it, the attachment hole on the Bracket side was expanded to 10 mm with Drill. We adjusted the angle by slightly bending the Bracket so that the Brake fluid tank was horizontal as much as possible.
[Is there anything I was disappointed about?]
None.
【Hope for Manufacturer - Please let me know if you have any improvement points]
Please lower the price a little more.
【Have you compared items?】
I also considered Bracket of DAYTONA, POSH and GALE SPEED, but the shapes and colors are not suitable for hope.
View detail
Fits: その他
It is not possible either.....
With ZX-14R ABS bush hanging
I used it for processing ClutchReserver tank
Small I am Repair Parts but I thank you for commercialization
However - - Because the price is too high
It is a little disappointing.
View detail
Fits: KAWASAKI Z1-R2, KAWASAKI Z1-R, KAWASAKI KZ1000MK-2, KAWASAKI Z1, KAWASAKI Z2, KAWASAKI Z1-R2, KAWASAKI Z1-R, KAWASAKI KZ1000MK-2, KAWASAKI Z1, KAWASAKI Z2, KAWASAKI Z1-R2, KAWASAKI Z1-R, KAWASAKI KZ1000MK-2, KAWASAKI Z1, KAWASAKI Z2
Quantity : 2pc. Purchase eyes
Quantity : 2pc. It is a purchase of eyes eye. Last purchase was for Brake Master but this time I bought this SANCTUARY Sanctuary Master Reserver Tank Bracket for Clutch Master. In order to bend to an arbitrary position, the last time it warmly bent at a stretch, because Black Anodized peeled and discolored, it was bent slightly at a time to position it.
It was successful this time.
View detail
Try it on
I got a bit of trouble to bend and orient a little bit. I think that it is alike to try trying it because the price is cheaper than other items. View detail