Reviews
Anyway it is light
It is terrible lightness
Installation is easy because it is fastened together with suspension Mounting Bolt.
However…
Weld part of Color and Pipe of suspension mounting part has broken due to vibration _ : ('? `」 ∠) :
The cracked part is the boundary between the weld BEET on the Pipe side and the base metal
It may be light, but those who made it a little thicker Pipe
Is it good?
Since it was high, I re-welded and continue using it.
It may crack again (> People <;)
View detail
A little over two thousand yen.
I can do it well except for 2,000 yen habit. Material : Is it Polishing or Polished?. If this is 4,500 yen Material : Aluminum and higher Material : I thought that I do not have to buy Titanium. View detail
Fits on my bike perfecly, the instalation takes 5 minutes, and looks very well, a big visual improvement, since factory backet is very big and bulky.
Fits on my bike perfecly, the instalation takes 5 minutes, and looks very well, a big visual improvement, since factory backet is very big and bulky. View detail
Fits: YAMAHA FZ1FAZER [Feather]., YAMAHA FZ1FAZER [Feather].
Dress-up effect is outstanding.
The accuracy of the product is also good, it looks (Welding mark) Also beautiful and amazing.
I was able to attach the attachment easily, without processing..
Because the Dress-up effect is outstanding, I think that it is a recommended product.
However, since the attached Bolt which stops the Exhaust Band was slightly shorter, it is about 5 mm more if possible
It will be saved if it is long..
View detail
This hanger fits perfectly on the ZX12R Kawasaki and includes OEM rubber mount to maintain the quality control for attaching aftermarket muffler as well.
This hanger fits perfectly on the ZX12R Kawasaki and includes OEM rubber mount to maintain the quality control for attaching aftermarket muffler as well. View detail
The accuracy is not good - - -
I installed it together with the Exhaust System replacement.
I thought after receiving it at hand - - - heavy - - -
Because it is made of iron, it is heavy. And rust is made of iron.
A little rust came out from a bald part of the paint so I upgraded it.
It is processed by Logo Moto's Logo, but did you cut out with Hanger, Jigsaw or something in the first place?
BALI remains or marks cut out in the section of the cut surface remain.
Well, as it does not affect the function, honestly I do not need anything else.
Is this neighborhood ItalyQuality?. I do not care about the function, so it seems like a good idea - - -
Foreigners will hear that even if Wound enters the car's Bumper, they will not handle Wound,
To be honest, what is unique about the sensitivity of Japanese people.
I decided not to do Tandem so I can fulfill the function as Exhaust System Hanger.
However, if you also remove the footpeg of Left Side and the Right Side is attaching a heavier Hanger than footpeg, Quantity : Pair (for Left and Right) With regard to GSX - R 750 k 8 - L 0, I think that Balance of weight will change, and the other suitable Hanger is about RG.
Well I got cheap, so I complain luxuriously - - -
In general, is not it bad but is not it good.
View detail
I wanted items
I wanted Single Seat and wanted Exhaust Bracket, but the adaptation of 2015 was not confirmed.
OEMAKRAPOVICS / O wearing people are Large durable.
View detail
Easier to use than OEM
Used for DAX + FalconExhaust System. I was squeezing the Exhaust Bracket and the Carrier in the ShockMount part, so it was hard for Cap Nut to apply Torque. However, thanks to Bracket, we were able to tighten it carefully as we were able to conclude Carrier and Exhaust System separately.
Although I was using OEM Product before, it was inconvenient because it was inconvenient to remove it by removing the Exhaust Bracket to the outside that was large convex shape by Male Screw, but because it is separate from Bolt, I was able to work. It is also good looking.
View detail
Fits: KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX1100
Frankly Parenthesis is nice !!
Attached to ZrX 1100.
I purchased it because I wanted to Refreshing around Rear.
I think that it is a feeling that there is no personality in a common Bracket, I like this shape and it is purchase.
Although I did not have much difficulty in installation, the work went smoothly, but as it is, the Exhaust System and Shock interfere with each other, so I added Rubber Bush between and attached it.
It looks refreshing and I'm satisfied to see Rear shock well.
View detail
![Exhaust Hanger [Exhaust Bracket]](https://global.webike-cdn.net/photo/article/44/1463217789844L.jpg)
Fits: SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000
Design is good - - -
I installed in L6.
I decided it only by Design, but was sputtering at the time of cutting?
The painted surface is terrible.
It is a place I want you to do somehow even if you raise it a bit more.
View detail
The part pictured by Webike has two M8 bolt mounting points, one at each end. But the part you will get is completely different, with only one end with a M8 bolt and the other one has a huge hole that mounts on the shock. You can see the difference
The part pictured by Webike has two M8 bolt mounting points, one at each end. But the part you will get is completely different, with only one end with a M8 bolt and the other one has a huge hole that mounts on the shock. You can see the difference between the photo I posted and the one that Webike has pictured. I wish I received a part like the one pictured instead of the one that I received. They are not the same. View detail
It's pretty good
I purchased it because the installation position of the exhaust system of FZ 8 and FZ 1 was the same.
My motorcycle has been replaced with a Slip-on Silencer for the Exhaust System, but it is similar to the OEMExhaust System, so it could be installed in the FZ 1.
Passenger peg has been removed, but the opportunity to Tandem is almost Zero so we only have to return it at the time of vehicle inspection.
I'm Steel, so I'm worried about Rust.
I wish I could have been made of Aluminum if possible ...
Exhaust System It is good to have fixed Bolt and Color.
View detail
Fits: KAWASAKI NINJA250R [Ninja], KAWASAKI NINJA250R [Ninja]
I like Simple!
Purchased together with purchase of Single seat cowl. I chose this because the simple one was good.
Is it because I am wearing an external slip-on Silencer, the location of the Silencer band and this Exhaust Bracket is far away. In my case, I added a 30 mm Spacer between Frame and Exhaust Bracket and it got better.
View detail
Fits: YAMAHA YZF-R25, YAMAHA MT-25, YAMAHA YZF-R3, YAMAHA MT03
It is conspicuous and cool!
It looks very well and it is very cool!
I do not care so much, but there are some traces left when I bent.
Installation is also possible immediately.
Bolt fixing the Exhaust System is an image, but it was written that OEMBolt should be used instead of the item I bought. However, since such things were not written in the explanation part of the product, it would have been better if there was not Bolt written before purchasing.
View detail
K-FACTORYK-FACTORY Titanium Bracket for Exhaust System
K-FACTORYK-FACTORY Titanium Bracket for Exhaust System
I bought it with K-FACTORY EX tube. It was Bracket for Exhaust pipeUP which can not be installed at Rear suspension.
Notice also on Manufacturer's website so be careful!
View detail
Fits: KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZRX1200 DAEG
The finish is Beauty
Beauty by Polished.
It is fun to polish.
Material : It is quite lightweight because it is Aluminum.
I just want you to manage the price.
I feel a bit high.
View detail
K-FACTORYK-FACTORY Titanium Bracket for Exhaust System
K-FACTORYK-FACTORY Titanium Bracket for Exhaust System
I tried exhaust pipe, Silencer, Bracket with Titanium.
I only came up with K-FACTORY so decided here.
Titanium baking is on and stands out!
It is a little expensive so it is a star Minus 1.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
I would recommend this bracket if you are planning to install an aftermarket header on your SR that does not have the factory style bracket on the pipe. This secures and supports the header to take pressure off the header studs on the engine.
I would recommend this bracket if you are planning to install an aftermarket header on your SR that does not have the factory style bracket on the pipe. This secures and supports the header to take pressure off the header studs on the engine. View detail
Fits: KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX1100
If you mention the type of Exhaust System, one item without complaint.
I bought this Bracket because I took Rear m footpeg for better appearance.
It was Bracket more than I thought.
Bead of welding is beautiful in Large, you can see that you just made it well just by watching this.
The surface finish is also very beautiful.
By the way, the Exhaust System is BESS's Nasato R.
With this Type, Bolt-on does not interfere with Shock. (About 15 mm with room)
Because there is moderate none, I think that absorption of vibration is also good. If there is not a certain degree of bending, stress will build up in the bracket and the possibility that the material will break easily on Aluminum will be higher, so I think that it is a well thought form.
After that, although it is only durability, only this is unknown, since it is not understood if it does not run.
However, things are good.
View detail
Purchased for Repair
Since I did not have Lever, Wire in the second-hand Exhaust System, I ordered it, but it took 1 month to arrive
Finally I thought about installing and installing Wire handling problems etc. etc. I cut the Lever part half and put it on. It became Short lever but it can be used without problems
I thought it would be heavier to move, but I am fine at all.
Since Lever part is resin, it deteriorates with ultraviolet ray etc etc. I am concerned
View detail