Reviews
Gaps in air-cooling fins do not reach deep enough.
Very easy to use as it can be rubbed vigorously.
The core is like a needle Gold, and if there is a gap of about 2 cm in diameter, it can be plunged and washed.
Convenient for washing off mud and oil, but not for washing gaps between air-cooling fins
The core is hard and does not bend limply
Maybe I'll bend it myself before I use it.
View detail
It's easy for anyone to use.
The Clip portion is +Red and -Black. and visually very easy to figure out!!!!
I have been using it for over 8 years with no problems. It is well made and
Compact and affordable! Impeccable!
View detail
Sturdy and easy for anyone to use
I have been using it for about 8 years now without any problems.
Just connect it to the battery terminal! The color of the Clip part is also very easy to understand!
I'd recommend it to everyone, because it's never a bad thing to have!
View detail
Somewhat difficult to use
I am using it to remove the cowl of a Ninja 250SL along with another Emon interior stripper.
I think this spatula is difficult to use because the handle has a little too much curve on it;
I use this spatula only for the parts that require a lot of force because it is thick and strong. It is not suitable for delicate work.
View detail
Just the right thickness! Easy to use!
I use it to remove Cowl from Ninja250SL. Anyway with moderate thickness and hardness.
Easy to use! Recommendation to remove the Cowl from Full CowlMotorcycle!!!!
View detail
For the Left Hand. You can beat the hell out of anything zakzaky!
For Left Handers. The Elastomer resin Grip is a good choice! Elastomer resin grips for non-slip grip!
NeedlesGold, Copper wire, Tin plate, Aluminum, Cardboard, Cloth, PPBandetc.Basically anything I can hit it off." is the appeal of this product.
Blades are rust-resistant Material:I'm glad it's Stainless Steel, it's a Commendation!
View detail
"Japan" Artisan handmade Scissors at this low price!
As the title says, each piece is handmade by hand by craftsmen in Japan.
This low price! And it has a fluorine Coat finish that prevents Tape from sticking!
Level high quality that I'd honestly buy it even if the price tripled! I recommend it to everyone!
View detail
over-priced goods
The tip is thick and does not bite into the Clip.
It needs to be thinner to be useful.
View detail
When using Driver Frustration." Decrease!
I'll start with the conclusion. You should definitely buy one." It is
It is used by screwing in the tip of the Driver, but it is common when using the Driver.
Bolts. Pollock." Prevents falling off.
If it falls down, it's in the Cowl or at night, it's lost or …StressMAX.
You can prevent it. This effect… for only a few hundred dollars! Absolutely. "buy" It is!
View detail
It is the best in the same price range, with many Gauge and good cosmetics.
It is a simple tool, so I chose it for its cost performance. 25 sheets are enough to use. The dimensions are Large and do not seem to be out of order. View detail
The tsubaki at the hand and the Cover at the tip are nice.
As expected from DAYTONA, it is well thought out.
There are some areas around the Engine that are quite sharp or Edge standing.
This Brush prevents the bristles from injuring the hand in such areas.
The rubber cover at the end of the brush is designed to prevent damage to the motorcycle parts by the brush.
It prevents
It is a larger size than expected, so it can be used to wash the engine part of the reverse side of NINJA's Exhaust System, etc.
It covers a large area, making it easy to work with.
Brush also has a waist, so I thought it should be used exclusively for Engine, undercarriage, etc.
View detail
Brush hardness is just right
I had been using a Nylon brush, but the length of the brush was not long enough and I could not wash it deep enough.
This product, Malbrush, has a thin handle that is easy to insert into gaps between Engines and Wheels, and has surprisingly many uses.
The other one is also easier to use because Brush is longer and softer.
There is no substitute for Home center.
Great for cleaning fins of air-cooled Engines.
View detail
Sorry if I'm not using it properly.
It snapped right off.
Because it's 16 degrees Celsius?
Because of poor usage?
View detail
Easy to use and satisfying
I am satisfied with this product because I can easily use it for easy cleaning of small areas, etc. View detail
Harder Brush
The Nylon brush is harder than I expected.
I wonder if a Paint brush would be safer considering the scratches.
It is
The waist is strong and can reach deep into tight places. is it good?
View detail
Great tool for the job
Been using a spring puller that was completely made out of metal, handle included. I love tools.I buy more than I need, and my more specialized tool usage is usually few and far between. That is not the case for a spring hook tool! This thing is simple, well made, and I've gotten way more use out of it than I initially thought I would. could not believe the difference a well designed spring tool makes.I had always used pliers, with springs flying everywhere and skinned knuckles This tool makes it simple and quick. It is so much better than playing the plier or screwdriver game when trying to install and remove some of those stubborn exhaust springs! View detail
Sharp Handle with care
I'm not used to this, so I had to cut the Outer tube with this one.
It needs to be used gently.
Material without changing shape:If there were Plastic's, I'm sure they would have enough use for it.
They won't be able to cut it down.
Well, I'm not happy with it, but I guess I'll keep using it.
View detail
First Quantity:Just right for a Set.
I think it is necessary for Motorcycle maintenance such as machining and stripping each Screw lock agent.
However, the more you spend on this type of instrument, the better it is, but for me, I felt that this product had the best cost performance.
We feel that from this point, we can purchase the missing instruments on a case-by-case basis.
View detail
For cleaning complex shapes around the Engine
Engine fins and switches in the Handlebar.
Purchased to clean crevices in complex shapes.
I do this about twice a year, just to clean up all the little details.
Long cotton swabs are used in the gaps between Engine fans, Switches, etc.
It removes dirt and grime from even the most complex shapes.
This is convenient and useful.
View detail
Convenient but requires skill.
Chamfering tool for Gold parts.
I used it when I made the collar on a lathe to install a CRM50 Wheel on a DT50.
I decided to use it because I had removed it from the Zipper and because I had the tool on hand.
It is quite easy to remove at least a thread chamfer.
However, it is not suitable for Large beveling because the surface rattles depending on the amount of force applied.
Also, for beautiful circle chamfering, it is more recommended to use a large-grit drill, a conical chamfering tool, or a conical file (with abrasive particles electrodeposited) rather than a Chamfer Scraper, because they are cleaner.
In addition, the aforementioned The amount of force." However, there are more appropriate tools for hole chamfering, etc., so it is better to use those tools for clean machining.
View detail