Reviews
Fits: HONDA CB50, HONDA MONKEY, HONDA DREAM50, HONDA DREAM50, HONDA DREAM50, HONDA SUPER CUB 50, HONDA GORILLA, HONDA APE 50, HONDA APE 100
It is convenient to have
I used it for 12-inches' Honda mini bikeCustomRacer.
Because there are several Normal heads of APE, NSF 100 □ Purchase Set Items.
It is convenient to have.
View detail
This is good!
The nail is attached to the tip and the middle, and when tightening up, let's bit the front nail "Push" You can turn Ring by operation. This is a function not found in ordinary Wrench, and the work difficulty level changes at all with just this. I definitely buy it.. I think that it is an essential item for the DUCATI system with no working space. I always botherly removed Rear suspension itself when I change the Large Kim Setting (In ordinary Wrench it is 1 / Good luck if you do 8 laps)
Thanks to this Wrench it has become quite easy.
Especially, it is Large that you can tighten easily.
However, since the value is expensive for the frequency of use, I thought that the price was expensive.
But "Time is Gold" So it may be better to be easier.
View detail
Good stuff
I wanted a T shape and I was looking for it. Since first-class KTC came out at an affordable price, purchase. I got a lot bigger than I expected. I would like to increase the types of tips and arrange various things. It's very easy to use. Of course accuracy is also good. View detail
Fits: YAMAHA MAJESTY250, YAMAHA GRAND MAJESTY250, YAMAHA MAJESTY125, YAMAHA CYGNUS X
It is easy to use.
Used for SecondaryOverhaul of CYGNUS X.
Previously, I used a spinner handle with a 46 mm socket, but Nut slipped thinly in many cases.
In KIJIMA 's Wrench, I put Nut on Wrench, with Clutch Body in portrait and Hammeretc. Just loose it by simply hitting a concon.
It is convenient because it is easier to put power when assembling.
If you do not use Torque wrench let's mark the position of Nut before removing it.
Let's tighten with 9 km Torque when closing 46 mm Nut using Torque wrench.
View detail
In T-Type Wrench 10 mm, it is transcendental
The tip is a Taper, it is a shape that is easy to enter a narrow part.
Nut and the place to insert in Bolt are made thin, but there is no problem with strength.
Even if you use it, cracks will not come out like a thin walled Impact Sockets car.
Also, because the tip is thin, putting it in Bolt or Nut is easy to see, there is no Stress from Socket wrench + THandlebar.
The length of the vertical axis and the horizontal axis is exquisite.
I bought some TWrench from other Manufacturers, but depending on the application, the width was too long choice, the length was too long, it was one more thing.
I did around the Home center in some shops, but it does not hit anything beyond this.
The previous thin shape is only 10 mm, but I think that other Size will become Kowa Seiki with nature and flow.
For hobby to machine tinkering, this is a mandatory Items.
It is obviously more than a foreign famous Manufacturer.
I do not know much, but is not it a Level that I can boast about owning this.
It's embarrassing, but you can become a little happy each time you use it.
View detail
It is devised.
(1) It is 35 mm high, so it is effective when the valves around are narrow.
(2) The diameter of the Handlebar section is 29 mm. Same etc. There are many thin products like pencils in goods, but it is easier to grasp than other companies' products.
(3) The surface is a slick texture. If you turn with bare hands I think I will Fit in hand.
(4) This price is enough if it is this price.
(5) Regarding durability, I have not used it for a long time and I do not know.
View detail
Matching to APE type Engine.
Please note that the tool does not enter well unless the fixed Wrench part is thin because the curved part of the Locker Arm is approaching the lock nut in the APE 100 series.
Lock nut 2 side width is 8 mm and 9 mm
Adjusting Screw conforms to Minus groove type.
Greedy, square Adjusting ScrewType (CUB etc.) If there is an Attachment that also conforms to 1 pc it is strongest b.
View detail
With insufficient confirmation - - -
Purchase for CYGNUS1YP.
My mistake, but the head of Adjuster turning round and round interfered with the opening when I removed the Tapper Cover and I could not use it. (I think that the Knurl department was a little smaller or I could use Shaft for a longer time)
Wrench itself is easy to use and texture is also good.
Let's be careful when you want to use it other than the applicable model (Lol)
View detail
Tappet Adjust Wrench
In order to Overhaul Engine of MONKEY, we decided to purchase special tools one by one.
First of all, I bought to adjust the Tappet first, but when TopScrew turns a little Small turning Handlebar a little it will be turned around and it will turn around a bit and when you measure the gap it narrows slightly or put a little effort and endure it If you do, you need to spread and get used to it. I think that there is no difference in the amount of any goods, but I chose this as a reliable Brand. I think that practice is also a pleasure for Custom.
View detail
Actually it is a bit different ...
Originally used for Clutch of Honda Mini bike, GSX-R1000 (K3 / K4) Swing arm pivot Nut.
Service manual was instructed to use special tools, which was also expensive (Surely over 5000 yen) Because it was profitable.
It is a tool to be used by connecting to Socket wrench and so on, but be careful. In ordinary Ratchet wrench you need to use Extension bar etc..
View detail
Satisfied with COSPA! Firm making.
Purchased as a disassembling tool of Clutch such as APE, CUB.
It was my first time, but I could use it without particular problems.
It is the deciding factor of purchase that the price was cheap regardless of what.
The frequency of use is also low.
I think that it is good though it appears variously.
View detail
Easy to use! Trust Brand!
For ValeWrench for Vehicle can not be used
Purchased for Mini bike.
The handful part is easy to turn and very easy to use.
As expected "KTC" is.
Moreover, it is good that the price is as low as 500 yen.
For those who do maintenance of Tire themselves, necessities.
As long as you can use it is useful if there is one!
View detail
Very easy to use and recommended!
It is extremely easy to use and recommended.
Lever easy to hold, moderate weight
It feels like Fit in hand.
Balance is also good!
Although it comes out from other Manufacturer, the price is also relatively cheap
Chromium Plating also looks good texture and decided to purchase.
Indeed, it is recommended because it is a satisfying item.
View detail
This one is amazing!
- - - Can you see it in the picture?
This little impression of me - - - (Lol)
In three directions, hexagon is 4 mm - 5 mm - 6 mm, and
Where elongation, 8 mm in BOX - 10 mm and
It is said that 12 mm can be replaced and used
Ultra - Suguremono - - - (^. ^)y-.. o ○
Although there are cases where it is difficult to use a narrow place
Anyway, this "Convenient goods" To
I was deeply impressed!
It is not the best way to use it like an on-board tool!
View detail
You can use it surprisingly
Material : Because it is Plastic, I purchased it because I thought it was safe also for Aluminum's Fork cap. Rather than ordinary Plastic, it is a solid plastic that is mixing something. Fork cap that I closed with MONKEY was able to relax by this with a single shot. Since traces like surface contact are attached to Wrench, I do not know how much it will have, but Large is also good as it is in Wrench that is also friendly to Aluminum.
I thought that it was a place called TECHNIX.
View detail
Fits: HONDA NSR50, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Since it was Brand DAYTONA whose reliance is possible, it purchased in comfort.Although this was the first time that the Clutch lock nut of a MONKEY is desorbed, it went well.
Since it was Brand DAYTONA whose reliance is possible, it purchased in comfort.Although this was the first time that the Clutch lock nut of a MONKEY is desorbed, it went well. View detail
If Tappet adjustment purchased to Tappet adjustment of MONKEY FI is done without a tool, will do by the Pliers and a 9-mm Glasses wrench, but.Since a Glasses-wrench part is not needed, I want it to sell only the knob for Tappet Screws, if even th
If
Tappet adjustment purchased to Tappet adjustment of MONKEY FI is done without a tool, will do by the Pliers and a 9-mm Glasses wrench, but.Since a Glasses-wrench part is not needed, I want it to sell only the knob for Tappet Screws, if even
that can fix certainly comfortably says avarice since there will also be no fear of being able to turn a Tappet easily and licking a Screw unlike the
Pliers if this tool is used f^_^;
View detail
Fits: Others CUB ,CB50,MONKEY,GORILLA,APE50,APE100,DREAM50 (AC16/15,AC07),KITACO Ultra head,KITACOAPE series SPLHead
Since it was exhaust steam side and intake-air side 0.14 0.12 to a 20,000-km run, it adjusted using the article here.Using for the SuperCUB110 is on the 9-mm side. The touch and the result which were used are good.Although the knurl process o
Since it was exhaust steam side and intake-air side 0.14 0.12 to a 20,000-km run, it adjusted using the article here.Using for the
SuperCUB110 is on the 9-mm side.
The touch and the result which were used are good.Although the knurl process of
, however the place which it tool
of the direction which carries out Adjuster adjustment Has is carried out, when it fastens and is crowded with a Wrench being conscious of bolting Torque 9 N-m, it slides together and adjustment shifts.
It has grip 55 to 60 kg, and just like men in general once.
Even if it grasps strongly intentionally, it has and withers.Since it is , if it loosens several times, it adjusts and a check, and time and effort and practice are required.
If it gets used, it can take out on the dot, but I think whether it is all right to buy a thing with a large place in which the above has trouble and a direction to worry.It is setting of price with a generally higher after [
] KITACO.
View detail
He bought it, in order to remove a Chain cover.Since a Bolt was not just going to enter by the ordinary Wrench, it was very helpful.Since a price is not high to there, either, it is good.
He bought it, in order to remove a Chain cover.Since a Bolt was not just going to enter by the ordinary Wrench, it was very helpful.Since a price is not high to there, either, it is good. View detail
[Webike Monitor] It purchased to Rear-suspension Pre-road adjustment of STREETFIGHTER 848. Although the Frame was obstructive and it was not able to fasten in the Hook wrench which it had, since the Hook wrench of an AELLA can also us
[Webike Monitor] It purchased to Rear-suspension Pre-road adjustment of
STREETFIGHTER 848.
Although the Frame was obstructive and it was not able to fasten in the Hook wrench which it had, since the Hook wrench of an AELLA can also use direction of which that is fastened from the crevice between Frames that is loosened, it is dramatically easy-to-use.
View detail