Reviews
No ruggedness.
I haven't run with the side bag yet, so I'm not sure how I will feel about it, but it looks neat because it is a thin Pipe.
I like the fact that the angle can be changed freely, and I think it looks not tacky (in my opinion) without the side bag.
View detail
Installed in 2023 MODEL.
Since the MODEL has been changed from Mounting Boltm6 to m8 since 2022, a little modification was necessary. View detail
Tank LockBag is convenient to use
I used GIVITank LockTank Bag in FJR. As you know, it is very useful because it can be detached with one-touch, so I do not have to take it off when I take a break. This time, I added a CRF250L to my CRF250L, and although I can install it on the RALLY50, I cannot install it on the L. So, I decided to use the Tank LockTank Bag. Therefore, I purchased this product in order to use Tank LockBag as a seat bag. View detail
Exclusive products are still good
I had been using Universal Product's triangular side bag support, but it could not support the bag I had installed and the bag made contact with the Tire, creating a hole, so I had to install a larger one.
I did not want to spend a lot of time to select one of the many Universal Products, only to regret it when I tried to install it and had to choose a different one. I have already forgotten how many times in my life I have lost money by buying cheap products.
The large size is necessary and sufficient, and it does not change the appearance of the cool XSR700. The strength is also perfect.
My car is mat color, so I sprayed Primer surfacer and painted it matte black.
I'm satisfied
View detail
Fits: BMW R1200 RS, BMW S1000XR, BMW R1150RT (02-04), BMW R1150RT, BMW R1200 15-18, BMW R1200 R 15-18, BMW R1200GS ADVENTURE, BMW K1200R (05-08), BMW K1200RS (00-04), BMW K1200S (05-08), BMW K1300 R 09-18, BMW K1300 S 09-18, BMW R1200GS, BMW R1150R (01-06)
The picture is different.
I wanted to purchase this bag at the same time as the SHAD bag, but was hesitant to purchase it because the picture on the site was different from what I had researched, so I purchased it at another store. The part number of the item I received was the same as the webike part number.
R1250RS was just a Type to replace 4 Bolt of Fuel tank cap with Pin. if you can understand Double nut, you can easily work with 2 M5 Nut.
View detail
Hepco&Becker C-BOW
Installation is very easy and can be done by anyone with tools! No special modifications are required! View detail
This is for Large type box!
It can be mounted on MT-09GIVIFitting for Mono Rack without any modification. I had been using the B47Series on a narrower UniversalBase, but recently it started to rattle. I have changed to this WIDEBase and there is no more rattling at all.
We felt that WIDEBase is still more stable for Large type boxes.
View detail
Used for YAMAHA BOLT Shoulder Bag (2022)
Bag Rail is also made by KIJIMA.
I wish the distance from the suspension was a little closer, although it is unavoidable for safety reasons. Also, the back of the Bag hits the apex of the Support's Curve section and does not hit it straight, so it is slightly slanted, and the Mounting Bolt should have been Black.
I have written a lot of complaints, but it is a good product at a reasonable price.
View detail
Fits: TRIUMPH Bonneville bobber, TRIUMPH Bonneville Bobber Black
KIJIMA is a reliable manufacturer.
Although there is always a concern that products from overseas PartsManufacturers may have problems,
I knew that KIJIMA, a Japan-based company, had no problems at all with their products.
It is very reliable.
View detail
Why OEMAttachment, Honda, get a grip!
Honda Genuine Accessories.Side boxBracket installation was the worst.
I had heard that a person who purchased the product at the same time had found the installation to be Large strange.
I didn't think it was this Large strange.
In the end, all three stop bolt holes were machined to length.
When we checked the position of each of the three pcs, we found that they were off by about 2mm to 3mm.
All three holes were to be machined at least 1mm long,
It is made so sturdy that my Hand power was not flexible enough.
It took me about 3 hours, and I was cutting long holes little by little, believing that it was OEM, but in the second half I was using Leutor to do the hard work.
Finally got around to installing it.
I was worried about the future as I have other OEMAttachment purchases.
View detail
C-Bow
[How is it used?
For Touring
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
it's simple
How was your experience with it?
Only driven once, but not bad.
[Included Parts:were they on?
Washers, screws, etc. for installation are enclosed, and they are used to fix the unit in place.
[Was there anything that disappointed you?
Not sure yet, but so far none.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA CRF300L, HONDA CRF300L RALLY, HONDA CRF250RALLY(S), HONDA CRF250RALLY, HONDA CRF250L(S), HONDA CRF250L
Pipe feels thick and firm.
It could be used with DAYTONA's Grab Bar Carrier.
However, Bolt needs a long one.
View detail
OEM Product no doubt!
It is a little expensive, but there is nothing to say about its good looks and robustness. However, the Catalogue said that the work time was 0.6 hours, so I assumed that I could install it in no time and worked on it in the middle of the night, but I had a hard time removing the resin and it took longer than expected. I had no instruction manual and it took some time, but I was relieved to be able to install Well. I think that the Large is strong enough for brightly lit places, but those who are not confident in their work may have a hard time. In any case, the product is Standard EquipmentLevel, so you can be sure of the quality of the product! It's one of the best things I've ever bought. View detail
Available in Bag RailSingle Item
[How is it used?
As stated in the instruction manual, this product is designed to be used with Bag Support, which is sold separately.
But what I wanted to do was not to add a big Saddle Bag, I just wanted something that could be used like a Grab Bar to make it easier to load the Rear.
Therefore, we do not purchase Bag Support and use it as a Single Item.
Was the one you received as per Image?
The stick came as per Image.
Was the installation difficult?
Very easy. Even a child could work on it.
How was your experience with it?
It is very good, although it is used for other purposes from KIJIMA's point of view, because it is well made.
[Included Parts:were they on?
Yes.
[Was there anything that disappointed you?
No, there is not.
Point and hang of installation
I would just remove and replace OEM Product.
In my case, I do not use Bag Support, so the M8x75 supplied with the product is not long enough to hold the Bag RailBody in place (the OEMBolt is not long enough).
I think it is a good idea to have one, but it needs to be fixed by adding a spacer.
I was rifling through my toolbox to see if I could find anything good, and I found Nproject's Waist Color Set for M8 Found the
This was just a bingo.
[ITEMS TO BUY TOGETHER
If you want to fix a Tool Bag to this thing! If you are thinking "I want to fix my Tool Bag to this thing!
Helmet Lock Relocation Bracket would be available for OEM Helmet locks if purchased.
View detail
Unobtrusive parts, but very useful!
I purchased one of these BackRails to attach a Tool Bag and Accessory Case on the Left Side.
After that, I purchased and installed these Parts for Right Side as well, since they seemed to be useful in various ways. (Common For Left/Right Side.) 。
When using Luggage Net, the position and balance of the Net can be adjusted,
It is easy and convenient to fix Net without using Hook.
I have a Rear Carrier installed, and thanks to this Rail, the luggage Net does not interfere with the Rear Fender!
This BackRail is designed to be used in combination with the Side Bag Support, so if the BackRail is installed only, a commercially available Spacer will be required separately. (It is the difference between a Bag SupportBody Spacer or a stand-alone Spacer) 。
It is good that it is unobtrusive and unobtrusive. It is very useful and cost-effective.
Thank you, KIJIMA, for your product development.
View detail
Nut mold on the back side sticks
I have been using Tank Lock and wanted to continue to use it.
The installation itself can be done by anyone since all you have to do is tighten the screws.
However, if you leave it on, you may not have to worry about it, but when you replace the air filter for maintenance, for example, you will have to open the tank cover, and you will have to remove this product every time to remove the tank cover.
Then I took it off and found that the Nut on the back of the part that holds the Bag in place was hitting the Center cover and molding it.
The precision of the workmanship may not be good, and when the bracket was applied to the tank cap, it was not bent enough and the bag attachment part was in a floating state.
It is supported by the Rubber foot, but the Rubber foot is not high enough or it is floating, and when the Bag is placed on it and the Rubber foot touches the Center cover, the Nut on the back side touches the Cover.
If you don't think about mold adhesion and maintenance, there is nothing wrong with normal use.
View detail
I was satisfied.
I think it attaches without problems and has excellent cosmetics.
However, I think that the more Variation of Image photos (Sample?) with products, the more it will lead to sales. I think this is true for other Parts as well.
View detail
A little hard to install
I had a little trouble connecting the boots on the air cleaner, but I was able to install it on the JA65 without any problems. View detail
Fits: HONDA NC700S, HONDA NC700X, HONDA NC750S, HONDA NC750X
For Pannier mounting
I purchased this product as a car model specific to install the Pannier case.
It is a givi for better or worse, so I think the texture etc. is like this.
Large Pannier molds cannot be fitted, but they are sufficient for my needs.
I am satisfied
There is no rattling or deflection when the Pannier is installed.
As long as you don't fall over, you should be fine.
The installation took less than 30 minutes for a large body.
It is a bit tedious to remove the Seat, but technically it is an easy part.
View detail
Fits: HONDA NC700S, HONDA NC700S, HONDA NC700S, HONDA NC700S, HONDA NC700X, HONDA NC700X, HONDA NC700X, HONDA NC700X, HONDA NC700X, HONDA NC700X, HONDA NC700S, HONDA NC700S, HONDA NC700X, HONDA NC700X, HONDA NC700X
For PL1111
If you are going to add a top box, this component is not necessary,
I only have Pannier case so I needed this part.
It is still a GIVI component, so the price is high.
It is quite thick and does not seem to flex or bend.
Without this part, the Pannier holder cannot be installed,
It can't be helped.
View detail