Reviews
Gixxer 150 2023 MotoCo OriginalGIVI E22 exclusive Holder
[How is it used?
Used during touring.
Was the one you received as per Image?
More than. Texture and finish are LargeChange good. Careful work.
Was the installation difficult?
Very easy. The system is good and really ponable.
How was your experience with it?
The positioning of the Case is well thought out and exquisite.
[Included Parts:were they on?
Included Parts:Not available.
[Was there anything that disappointed you?
There was a shortfall in the installation bolt, but the Manufacturer immediately responded to the problem, which was a relief.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: SUZUKI BURGMANSTREET125EX, SUZUKI DL1000 V-STROM250SX
At the risk of sounding like an obstructionist... ('◇') voiced repetition mark in hiragana
However, we decided to publish this information because it is useful for DL1000 V-STROM250SXUser!
It is exactly the same as the fitting plate that comes with the GIVI Mono-lock case when you buy it.
The only difference is that there are four additional colors circled in red on the photo.
In a sense, it can be purchased at a PRO-like home center, or it can be assembled without it, so it does not matter whether it is there or not (although it would be stronger if it were there).
So, it may not be worth buying except for the use that you want to stock OEM boxes as well. Hmmm.
View detail
![Fitting for Monorack [6412FZ]](https://img.webike-cdn.net/catalogue/images/91664/98789_01_TS.jpg)
STREET TRIPLE765rs 2023 type
Although it is listed as compatible up to the 2020 model year, it can also be attached to the 2023 model year in the same way.
Since there is no English version of the instruction manual, we worked while looking at the translated site in some places.
The instructions for drilling the holes appear twice, but the 8.5mm holes are drilled while the parts to be drilled are still attached to the vehicle body for alignment.
Then, after removing the Parts, there is the work of drilling a 19mm large hole.
The drawback is that we do not have a 19mm diameter Drill and have to have an assortment of tools.
Once installed, I think the strength will not be a problem since it is Firmly in place.
View detail
Easy installation
The main function of this product is to support the rear back, but it can also be used as a hook for hanging cargo, which is very convenient.
Installation is easy, as all that is required is to remove two existing Bolts.
The quality of the product itself is not bad… but the welding marks are a little noticeable, although they are not visible… I would like to believe that there is no problem with durability, but at this point I can't say for sure.
View detail
YAMAHA Side Bag Carrier
perfect fit for my Yamaha XSR 900 2022, I will be ordering more Parts and accesssories in the Futr. So happy with my purchase. Thanks View detail
Fits: TRIUMPH StreetTwin, TRIUMPH BONNEVILLE T120, TRIUMPH BONNEVILLE T100
Solid construction.
Mounted on BONNEVILLET120Left Side.
Side bag is my favorite Henly Begins that I used on my W800. It was installed without any problem.
The clearance with the rear shock has been secured and there is no interference. The welding and painting are well done.
The only drawback is that KIJIMA's Helmet lock is difficult to use when KIJIMA's side bag support is attached. So I moved the helmet lock to the right side.
The Tandem Footpeg side has round holes in the flat plate, but it would be better if the holes were slightly longer so that the angle of the side bag support can be adjusted.
View detail
Side Bag Support attached
100% perfect match and i was able to attached my GIVI Side bag on it but photo is not attached; attached is the photo of the actual looks right after installation. by the way before installation on the side support, i also installed the rear bracket from SP Takegawa which they are both compatible during installation; thanks a lot. this parts are highly recommended. by the way im from the country of the Philippines who owns Honda CL500. looking forward on other parts available. Thanks a lot View detail
It's expensive
It is expensive, but it is GIVI and can be installed without any problems. I would give it 5 stars if the price was less than 20,000 yen.
Well, I couldn't find any other Manufacturer's stuff, so I had no choice.
By the way, the box is not a GIVE.
View detail
Perfect parts!
The screw holes matched perfectly with the car body, and the part was simply a matter of removing the screws and fitting them in the same place.
Also, I am satisfied with the inconspicuous product even when the tank bag is removed because the parts body and the fueling port are the same color.
View detail
Fits Perfectly
The prodcut fits perfectly on 2019 Serow 250, however there are some chipped paint near the thread. But doesn't matter much. No misalignment or uneven when the DRC Side Bag Support was installed! Great product, good packaging too! Will recommend! View detail
Firmly.
[How is it used?
Touring
Was the one you received as per Image?
as one would expect
Was the installation difficult?
Had a little trouble removing the intake duct.
How was your experience with it?
As an entrapment prevention Support, both Size and quality are good.
The precision of the screw installation was also fine, and it could be installed Smoothly. 。
However, the intake duct had to be removed for installation, and that removal was a bit of a challenge.
View detail
Fits: HARLEY-DAVIDSON XL1200, HARLEY-DAVIDSON XL883
Am I putting it on the wrong way?
Installed on an XL883N (2019). The Bolt on the back side of the bike is threaded on the Fender side, so it is easy to loosen and install, but on the front side, it is nutted. Therefore, it is not possible to remove the Bolt by simply loosening the Bolt and sliding it off. In addition, it is not possible to leave a space of about 5mm between the attached cylinder-like part and the loosened Bolt (Bolt is not long enough?). (Bolt is not long enough). The longer cylindrical part is not used and is fixed in place.
I don't know if it is a problem with my installation/motorcycle or the product.
View detail
Easy installation
It is not visible because it is hidden by the Bag, but it is safe because the Bag does not get caught in the Tire. View detail
Fits: SUZUKI V-STROM650 ABS, SUZUKI V-STROM1000 ABS, SUZUKI V-STROM1000XT ABS, SUZUKI V-STROM650XT ABS, SUZUKI DL1000 V-STROM650
That's the exclusive product
Installation is a bit confusing, but the car model Exclusive Design allows for a secure installation. View detail
Fits: SUZUKI Gixxer 150., SUZUKI Gixxer 250, SUZUKI Gixxer SF250
Reliable Brand
The price is reasonable, but I think it is much better than buying a cheap Chinese product that I don't understand.
It is well made and I have no worries.
It may not be possible to put a very large bag on it, but I don't think a large bag would be suitable for a gixxer, so I don't think it will be a problem,
I ended up switching to Henry beguine's 4 liter Seat bag for looks (lol).
View detail
To prevent Messenger bag from getting caught in the bag.
CROSS CUB (JA60) I installed it in
As of September 2023, JA60 is not listed as a compatible car model on webike, but it is listed as compatible on ManufacturerSite and can be installed without any problems.
Since the Exhaust System Up Type was selected, only the Left Side was installed, but there was no problem since the Spacer for the One Side only was also included.
The installation itself is easy due to its simple construction, but a torque wrench is required to retighten the bolt on the rear suspension as it is removed.
I put a Messenger bag from trip machine on it and it was perfect in size as well as preventing entrapment.
The price is a little high and the texture is normal, but it is not a problem because it can be hidden if you wear a bag.
View detail
Cl500
I needed a side bracket, so I looked for it and decided on Takegawa. I had a bit of trouble with Daytona, but since my purpose was to dress up rather than mount a side bag, I chose something that was smaller and could also be used as a point. The manual said it couldn't be installed with other brackets, but I bought it anyway. It can be easily installed with a little modification. It looks small when viewed separately, but it is suitable when installed. A small side bag can also be installed, and I am satisfied because I purchased it with confidence in the quality of the Japanese product. I recommend it. A step up -------------- -------------------------------------------- I was looking for a side bracket, but I was worried about Takega Wago's Daytona, but I chose that it could be a pate because it was a little bit of a dress up rather than a side bag. It's a little complementary and it looks small, but if you put it on it, it's suitable for a small side bag. Powered by Google Translator View detail
Fits: KAWASAKI W800, KAWASAKI W400, KAWASAKI W650
I chose Black with Powder coat!
The normal front fender bracket was black, so we asked the paint shop to powder coat it, and then we ordered the parts, brought them to the paint shop, and had Kawasaki Plaza do everything from ordering the parts to installing them.
This is my personal favorite Custom.
View detail
Fits: HONDA Rebel1100 DCT, HONDA Rebel1100 DCT, HONDA Rebel1100, HONDA Rebel1100
This is a reference image when the back is installed.
Easy to put on and take off.
A security band can also be selected from several fixed locations.
Bag is a little tacky when not on.
It wasn't there in the last post.
Add the entire image with Bag.
View detail
Satisfied with the use of the extra tank batts.
The tank bag is old enough that it is not necessary to install a top case, and the RearCarrier can be attached to it. View detail