Reviews
No way …
I bought these for my '06 XL883R. It's a good idea to have a spare pair of shoes that fits your needs. View detail
Just in case something goes wrong.
It is the Fuse of Dr. Emon as it is known. It is not that bulky, and the performance is the word of the stability! Be prepared before you run out! View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
Is good.
It is a convenient Fuse holder to have.
In the past I used a tubular type Fuse, but I bought it because I am going to get it easily even on the road and I also plan to buy board type.
I think that it is a part that does not lose it by holding it.
View detail
Fits: KAWASAKI Z1000 (air-cooled), KAWASAKI Z1000 (air-cooled), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000 (air-cooled)
An appropriate item
Although it was my own mistake, the shape of Bullet Terminal was not available for ZQR D-1 as it was
If it is D1, OEM parts will still come out, you might as well consider that
View detail
Quantity : 1 Set of 3pcs. is
Quantity : 1 Set of 3pcs. is.
Replace Fuse because it has expired. I do not know whether it's good or bad as it's my first exchange, but there is no problem after replacement.
Fuse seems not to be disappearing so so it seems likely to be for the time being.
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
Purchase
In order to power the Attachment, this PMC Z1 / I purchased Z2 Plate Type Fuse & Holder. Size is Large as it is a normal flat type Fuse type. View detail
Why 25mm?. Because it is Honda.
I am using it in CUB. I wonder why 25mm is why Space has room.
According to a friend, "Honda is using Large body what was easy to obtain in that era?
It is like a cascade and a spell ... ".
Certainly there is such feeling, too. Actually it will be different, but w
Even one of the CUB's engines, Crank bearing (Clearance standard of) Every time I can open it
It is different, I am at a loss what to use in PL.
From within Honda "It's not as good as Kawasaki" I heard that the voice saying.
Aside, I think that this is a very good product of pine Stripe.
Since Fuse has been replaced with Fuse so far there has never happened Trouble caused by Fuse.
If it is a thin WireFuse, it may be cut off by vibration or contact may be bad.
If you are riding an old CUB and if it is a thin WireFuse of the past, you'd better replace it here.
As mentioned earlier, the one of Wire can be cut off freely by vibrations, and when it is cut off, it is visually inspected
Because it is difficult to do.
it's recommended.
View detail
AmonEmon Fuse clip Commerce Product No : 1280
This Emon's Fuse clip was very cheap as well as very cheap, so I purchased it because I wanted to carry it in the loading tool box of Motorcycle.
In order to extract the Mini Flat Type Fuse and the back fuse securely entering the terminal of the Fuse box, we could not escape by just the force of pinching the fingertips, so until now Radio pliers etc were necessary by now.
However, if you use Emon's Fuse clip, it is very handy because you can easily pull out Fuse.
The tip of this Emon's Fuse clip is shaped so that you can grasp the back part of the Mini Flat Type Fuse and the back Fuse tightly, so if you grab it, you can simply pull the Fuse out by pulling it with a light force in front It is made to be able to do.
It is not a translation that I expected, but since it is a one piece resin molding, the appearance is cheap feeling is very strong.
The price is really cheap.
However, as a function we have enough so please rest assured.
Also, Emon's Fuse clip says that Polyacetal with sufficient strength is used as a material, but this Emon's Fuse clip when pulling out a Fuse from a car-mounted Fuse box using this Emon 1280 Fuse clip If you do twisting obliquely, the corner of the Fuse clip's entrance will be easily broken and will be damaged, so when using it carefully pull in parallel slowly to recommend that you use it To do.
Although the price is 100 yen + consumption tax degree product, strength is suitable for the price, so depending on usage Fuse1pc. Quantity from : 2pc. Just by pulling out Set, this Emon's Fuse clip may be lost soon, so careful handling is required from everyday.
I am concerned about the strength of Emon's Fuse clip, so I will use RadioBench when pulling out Fuse by regular maintenance, this Emon's Fuse clip is dedicated to car fuse box It is inserted in the gap of inside and it is inserted.
Anyway, although there is a part which is a little fragile, it is not a burden at all as it is a tool of price of about 100 yen + consumption tax as a tool for the case of emergency.
.
View detail
To the spare of CUBC 50
I bought it because I was fiddling with CUBC 50's electrical equipment and cutting off Fuse. Because it is 3 pieces, you can also prepare.. It is saved because it is not handled in local home center and car shop. The price is also inexpensive and safe. View detail
Cell which was no longer turning was fixed ♪
Turning on the switch after turning on the switch from Garage, I wonder if I will get on VT for the first time a long time ago, when I turned the cell, the Cell did not turn around with a small sound called snappy (T □ T)
Neutral lamp truck, Blinker is also around before and after Quantity : Pair (for Left and Right) Both Cells were broken because they worked together without problems - - -. I tried pushing but I could not push it..
At the beginning I wonder if the Plug cord is disconnected, somewhere in Main's Harness is broken or Battery is going up - - - Although I thought it was, sparks were flying neatly even if Plug cord removed from the vehicle was attached to other vehicles, and noticeable damage was not seen in Main harness.
Even if Battery is connected with a car with a booster cable, Headlight will only brighten and Cell will not turn, and I thought, I thought, and I tried to look at Fuse, but none of them were visible by visual inspection ( - 3 - )
I had no choice but to pull out all the fuses and try to repetitively. As Cell went round, I felt secure contact with me, but it was safe, but now Headlight does not stick - - -..
If you apply Fuse one by one to the Tester, there is a place where you can not confirm by visual inspection Whether Fuse can not keep up with one!
Everything changed to this Fuse immediately started to work properly ヾ ('∀ `*) A
I have a lot of numbers and this price so I think that it is very profitable than buying it after becoming necessary in the home center (* '▽' *)
Also, unlike Fuse sold at Home center etc, KIJIMA is a famous Large Hand Manufacturer so I can use it very securely, and I think that it is very good also to put on a car as a spare as it can be sealed even once it is opened Was.
I decided to put it in the Accessory Case together with Phillips Screwdriver of palm Size on this occasion ('-'*)
View detail
Fuse runs out, Petit.
ETC Fuse has expired so I bought it for Replacement. Since installation is just work to insert, it is ok without problems. This 1AFuse has been saved since it is not handled recently in Shop. View detail
LITTLE CUB Fuse for a lapse
It is used for 2000 year LITTLE CUB.
When changing the Tail lamp to LED, because I inserted the wrong polarity, the Fuse was cleared, and the cell did not turn.
I got a story by using the spare Fuse, but also purchased in the future.
In the neighborhood's home center etc. 7 A Fuse is not available, so we decided to buy it here.
I think that the price was reasonable and reasonable.
View detail
People at CUB buy this with Wa Big when shopping
【What made you decide the purchase?】 It's a special Size with little room for selection, with Brand of Pine Stripe.
【How was it actually used?】 There is no problem at all. High quality.
【Was it difficult to install? (Hard parts case)】 it's simple.
【Please tell me the point of installation and hang (in the case of Hard parts)】 There is nothing in particular, but let's not put 30 mm in CUB.
[Is there anything I was disappointed about?] There is none!
【Hope for Manufacturer - Please tell me if you have any improvement points] No.
【Have you compared items?】 Sengoku no brand 25 mm Fuse, 30 mm Fuse etc.
[Others]
Purchased by Wa Big. I am using it for CUB.
This pine Stripe 's is inexpensive and saved a lot. When a person on a CUB buys something with Wa Big
Let's purchase this Fuse together! Not really a writer but really.
CUB is a slight special size of 25 mm and this is also a subtle Ampere number of 7 A.
Honda as expected to make such a place special.
There is nothing to worry about because it is not something that you normally do, but it will be Large strange when you start to cut.
I do not sell to Home center first (Lol).
Although it is impossible to force it even if it is Fuse of 30 mm, it is impossible and Large Resist Ampere
It is not good as the number does not suit.
I might think that it is selling cheaply at electronic parts stores, but it is not so.
As a result of field survey in Akihabara, 25 mm 7 A is not in the middle, it is probably the only one in the basement of Sengoku
Was. About 80% of this pines Stripe in terms of price, it was not that cheap.
That's why I'd like to infer the pine stripe. I'd love to. it's recommended.
View detail
Everything is just right!
This time, I bought this Fuse to improve the electrical system of the old car.
This product contains 3 Fuse.
One for servicing by maintenance.
Another one stocks as a reserve under Seat for a moment.
Those who are riding in old cars will recommend the exchange of Fuse.
Since it is 25 mmType, please make sure it fits your own Holder!
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
I will refresh it with Slim Holder...
【What made you decide the purchase?】
Most old cars are rod shaped Fuse holders, this product was the closest to OEM shape.
Because it is long and slender, it fits better around Battery.
【How was it actually used?】
I thought it was Holder Only, I ordered Fuse separately, but since Fuse was also in it, I was betrayed in a good way.
Cover is also attached, TAB, receptacle's Bullet terminal is neatly neat.
【Was it difficult to install? (Hard parts case)】
In my car model, I only removed the existing Fuse holder and incorporated it there, Electric Works Pliersetc. I did not need a tool.
[Is there anything I was disappointed about?]
Single point. I felt that the clearance of the side of the Holder is Large like the photograph. I was worried about the corrosion caused by the invasion of rainwater, so I wrapped around the gap with a hen bracket and closed it. I think that if you feel a little more tightness you will feel more comfortable.
【Hope for Manufacturer - Please let me know if you have any improvement points]
I would like to make the above gap a little narrower.
Material : If you make it mesh with Rubber's, you can do it without damaging the conductive wire.
【Have you compared items?】
There is none. Because there was only a rod-shaped Holder.
View detail
The portion which it has been short of is exchanged and the thing Surplus is stacked as a reserve. three are put in and it comes out, and I am budget prices and think that it may put on a house even if it has not run out, or you may be stacking.
The portion which it has been short of is exchanged and the thing
Surplus is stacked as a reserve.
three are put in and it comes out, and I am budget prices and think that it may put on a house even if it has not run out, or you may be stacking.
View detail
Only by using a stronger Valve, a light did not turn on but it was moreover damaged to the Fuse. Since it is , it cannot but exchange, and when cheap, especially even if it is, there is also no fault. I think that the Fuse may be partly loaded i
Only by using a stronger Valve, a light did not turn on but it was moreover damaged to the Fuse.
Since it is
, it cannot but exchange, and when cheap, especially even if it is, there is also no fault.
I think that the
Fuse may be partly loaded into the Spare.
View detail
It is a Fuse which is not understood unless it removes whether it is run out whether it has run out to put it bluntly. Isn't this in a good Ideas? If it goes out, LED will light up and tell you. I do not want to see not much (smile).
It is a Fuse which is not understood unless it removes whether it is run out whether it has run out to put it bluntly.
Isn't this in a good Ideas?
If it goes out, LED will light up and tell you.
I do not want to see not much (smile).
View detail
Since the Headlight Fuse had been turned off, it exchanged. It is the kana which five pieces enter, is appropriate also to a price, and should just stock the remainder. Incidentally the Fuse box of KLX125 is on the flesh side of the left Shroud.
Since the Headlight Fuse had been turned off, it exchanged.
It is the kana which five pieces enter, is appropriate also to a price, and should just stock the remainder.
Incidentally the Fuse box of KLX125 is on the flesh side of the left Shroud.
View detail
I purchased in reserve. It enters, and it uses for the Case in comfort.
I purchased in reserve.
It enters, and it uses for the
Case in comfort.
View detail