Reviews
Fits: HONDA CBR400F, HONDA CBX400F, HONDA CBR400F, HONDA CBR400F
BRC BRC Main Board Fuse (OEM Type)
It is, after all, an OEM product, and although it is reliable, it is relatively expensive compared to other Fuse products. View detail
Sober Large Cut Parts
January to February, there are many days below freezing all over Japan, especially in the Tohoku region... I had a bad feeling the other day when I tried to fire up my car... but I didn't hear a peep.
Battery? I was sure it was weak, but I opened the fuse box and found that the fan had run out of fuse.
In case the Fuse here was stocked, so after the replacement → Engine started without any problem.
The cold discharges the Battery and reduces the Battery's ability to generate power itself.
When the engine is started in such a condition, the battery is forced to work hard, causing overvoltage, and the Fuse seems to cut out. I learned that the cold affects not only the battery but also the fuse.
good point
Low cost, easy to obtain, easy to stock.
No problem with functioning as a Fuse. After replacement, it is in good condition.
This is marked as "Ampere" and is easy to read.
The shape of the Fuse remains the same, so it can be used for other applications besides Motorcycle.
A bad point
No.
For Kick start motorcycle, there is not so much concern, but with Cell motorcycle, Battery+Fuse is also an item to be checked in winter.
As the weather gets warmer, many of us will be waking up our Motorcycles from hibernation.
If the Engine does not run, suspect Fuse as well.
View detail
Rose sales are helpful.
As the Title says, Rose selling is good, and it really helped me to choose the Ampere I wanted.
Netetc. sales, I was able to buy only the Ampere I needed for my Motorcycle this time, and the Ampere I didn't need was only cheap in Large quantity.
View detail
It's working fine!
It is a product that I have a hard time evaluating soooo much, but … lol I bought it because I suddenly ran out of Fuse.
I replaced it! Naturally, it worked fine!
View detail
3 cups
[How is it used?
I bought this because I accidentally skipped the Fuse for the Accessories power supply when changing batteries.
I could have gone to a Motorcycle supply store, but I was just planning to buy another product and bought it at Webike, which had it in stock.
Was the one you received as per Image?
What do you see when you look at Single Body? Was it this small? I was worried, but there was no problem.
As you can see in the picture, 2A contained three pieces.
How was your experience with it?
Naturally, there were no problems at all.
There is no particular change, but the Accessories power supply is now working properly.
【Review】
It is safer to buy in advance before skipping Fuse and rushing out to buy.
With 2A, as shown in the photo, there are 3 pieces in the package, so you can keep the rest as a spare.
The price is also inexpensive, which is good.
View detail
just to be sure
Until I bought this, I had been using radio pliers to remove the fuse, but I was concerned about scratching the fuse. If I did not use too much force, the fuse would not be broken, and I do not think it would cause any problems with the function of the fuse. However, I did not feel good about it, so I bought a special one.
There are not many opportunities to pull out the Fuse, but it is one of the best things to have in your toolbox.
View detail
6 Shop
Necessary items for 6BoltMONKEY and CUB, made in Japan for peace of mind View detail
-- KIJIMA 15A product number: -- vehicle type: corresponding to 304-7104 merchandise information -- details [ of wide use goods ]: -- the five flat package types
-- KIJIMA 15A product number: -- vehicle type: corresponding to 304-7104 merchandise information -- details [ of wide use goods ]: -- the five flat package types View detail
It is cheap and very convenient. On the occasion of shopping.
It is cheap and very convenient.
On the occasion of shopping.
View detail
Convenient
It's convenient
The fuse may be too hard to pull out, or the approach may be too narrow.
This product helps me to get rid of Fuse smoothly.
Recommendation
View detail
It was saved.
I was looking for a 1A product because I carelessly shorted the Wiring and turned off the Fuse.
I was in trouble because I couldn't find 2A in the shop, but I couldn't find 1A anywhere.
Buying just the FuseSingle Item is more expensive, so I bought it with other items to get free shipping, but I guess this was a ploy by Webig. LOL!
View detail
It worked fine.
I used it on SR400.
Because, one day, Fuse suddenly flew, and the cause was not understood by the simple examination in Tester.
The situation doesn't make sense to me, as it was cut off and Large strong about 10 minutes into the run.
I've ruined about 3 Fuse without knowing it, and I can't go out without worrying about this…
Because it came to be said, the product concerned (20A) was purchased for the cause pursuit and the emergency restoration at the destination.
Of course, it worked properly, which was a big help.
After repeated experiments, the cause of the problem was that the Blinker wire was hitting the exhaust pipe of the Up type.
It was that. Because the line was brushed and hit and melted in the place where it was not seen at a glance, it was
That's why it's so hard to tell.
I've reverted to NORMALFuse now that I know what caused the Trouble, because the enclosure is slightly longer, but
I always keep it in my Wallet to use in case of emergency.
The SR is an older design, so it will be this Large type Type, but I also own a relatively new SS.
I'm thinking of buying the company's Mini type 10A as well.
Well, it's not necessary if you keep OEM wiring or modify it, but if you can handle the wiring well.
However, since it is easy to cause trouble in the motorcycle which played with the electrical system to a large width, this product is
I think it would be helpful to have one Case.
View detail
Refresh the electrical system
I replaced all the Fuse in the junction box, although there was no particular problem. Last year, I replaced 6V MONKEY/GORILLA Main Harness, but I did not take care of Fuse, so I replaced it with a new one as a part of Refresh of the electrical system. Although there was not such a thing as being able to experience the effect by exchange, I think that there is an effect in the meaning which prevents sudden Trouble because the thing which has been used for 20 years or more might have been mixed. This time, Quantity:Quantity 1 Set of 3pcs.:I bought 2 sets and I am very happy to have them at a reasonable price. I don't know about the durability yet, but I trust Kijima. View detail
Low volume Fuse is hard to find in stores, so this is a great help!
Mini Flat Type Fuse.
In the shop, this transit allowable current (capacity) We rarely see any of the
Even if it is sold, it is assorted with other capacities and you will end up buying capacities that you do not need.
Although it is low capacity, I think that it is necessary to install it between the equipment and the battery when I think of the thermal runaway of the equipment to be targeted and an unexpected short.
We try to provide Fuse facilities regardless of the current consumption.
View detail
The flat type 1AFuse is Single Body, and it is thankful because it is almost not seen in the store!
Flat Type Fuse1A is a Single Body, and it is almost impossible to see it in the store, so I am very grateful for the Large change.
It is the best current capacity for the place of the small current which is too large in the capacity of Flat Type Fuse3~7.5A often seen in the store.
Quantity because it is valuable:I bought 2 sets
View detail
Flat Type Fuse7.5A is MAJOR, but be careful of vibration on Motorcycle…
Motorcycles have added vibrations that cannot be expected in a car.
If you use a cheap Flat Type Fuse, the Fuse part (core wire) may slip down and be exposed by vibration.
In this regard, I have not noticed any changes in the motorcycle accessories manufacturers.
View detail
Wiring at both ends is thick
[How is it used?
It is used as a safety protection for the 12V Wiring handling from Battery.
How was your experience with it?
The cable of both ends of the holder is thicker because the Fuse of up to 30A can be attached to this product. I think that there is no problem if it is a place where it is not seen though the feeling of discomfort comes out when I do Holder attachment etc. with a thin sq wire.
[Points to note]
Fuse is not included and you will need to purchase your own MINI flat type.
For use outside the car, we use the Wiring Cover together to increase the waterproof property.
View detail
I can't find it anywhere near me.
I use it to maintain my CUB.
The UniversalFuse of a good size was not in the home-centre near me, so it is saved.
View detail
Used to pursue the cause of trouble in electrical systems
Fuse of the electric system of an old car is sometimes cut, and it buys it for the cause pursuit. I was able to make various conditions, confirm Fuse breakage, and identify the cause. Because it is possible to reset it any number of times, it is safe even in Long touring if one is installed in a car. However, because the height is 15mm higher than NORMALFlat Type Fuse, there is a possibility that FuseCover cannot be installed. View detail
It's done properly.
Compared to the cheap Chinese Fuse box and the like in Deta Lame, the molding is relatively clean and I thought it was indeed DAYTONA.
It's convenient to connect them together, but you need to be careful because when you connect them together, it's more of a size feeling than you expected.
I don't think the quality itself is a problem, so I think it's better to think of this price as a necessary expense than to lose money on a cheap item.
View detail