Reviews
Best protection pads
Install new production pads on my bike. The material is with highest quality. It fits well and looks good on my bike. Highly recommend for others thank. View detail
A little difficult to put up.
I am satisfied with the Guard where my feet hit the ground when I ride.
One Primer is included for sticking, but I wanted to stick it firmly, so I bought the same Primer from amazon and applied it lavishly before gluing it. It is firmly attached without peeling off.
View detail
Fits: YAMAHA tricker, YAMAHA tricker, YAMAHA tricker, YAMAHA tricker, YAMAHA tricker, YAMAHA tricker
sure enough
I think the quality is good because it is a product of Y's Gear. It is difficult to install this product if you only own a Wrench. At least Wrench, Ratchet, Tie Wrap, and Nipper are necessary. The quality is good, so I am satisfied with the cost performance. However, I think the load limit cannot be relied upon in a good way. I think so. View detail
Windproofing and soundproofing effects are there.
This is a replacement from Puch Screen.
PoochScreen is Large type and will look forward over Screen.
The windproofing and soundproofing effect is very large, but on the other hand, in the rain, raindrops on the screen significantly worsen forward visibility.
This Screen is about 12 cm shorter than the pooch and has good forward visibility.
However, it was not as windproof and soundproof as expected.
It would have been nice if the front edge of Screen was 5 cm higher.
Of course, the effect is much larger than the OEM's initial Screen.
The quality of the Acrylic pooch is almost undistorted and you can see the front over the Screen, but this Screen looks slightly distorted.
In the middle of winter, when there is little rainfall, I think I would revert to pooch.
View detail
Great, beautiful product
Sau 2 tuần chờ đợi, đữ nhận được gói hàng. Đầy đủ phụ kiện, gắn lên xe đơn giản, có hướng dẫn đầy đủ, sản phẩm chính hãng yamaha. Đẹp hoàn hảo. Vote 5* ---------------------------------------------------------- After 2 weeks of waiting, Đu received the package. Full accessories, simple cars, full instructions, genuine Yamaha products. Perfect Beauty. Vote 5* Powered by Google Translator View detail
Could not be installed on 2LD1.
The seat does not close. The instructions say to adjust the mounting bolt if the seat is difficult to close, but the rear of the seat floats and cannot be closed without a lot of force. When opening, you have to push the back of the Seat with your weight on the top to open it. I am sorry to say that I will return it. When I put it back in the original Seat, it opens and closes normally. View detail
Fits: YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250X
Refresh for the 15th year
I bought the Y's Gear exterior before it went out of print, because the Blue exterior of the early model was getting worn out. I also like that it looks like WGP 50th anniversary color. View detail
Fits: YAMAHA NMAX, YAMAHA NMAX155, YAMAHA NMAX155, YAMAHA NMAX155
Recommended for the summer season and intense heat!
[How is it used?
I installed it because Seat gets so hot in the summer sun that it burns.
Was the one you received as per Image?
Mesh fabric, but it is thick and firm.
Was the installation difficult?
Can be easily attached to the One-touch.
How was your experience with it?
It does not get too hot even when exposed to a little hot sun. It also feels much cooler as a breeze passes through it while driving. Also, the footing is a little worse, but the cushioning is higher and more comfortable.
[Included Parts:were they on?
There is nothing but Instruction Manual.
[Was there anything that disappointed you?
None in particular. Items is a must for summer.
▼Yamaha vehicles are offered as OEMOption Parts for each model, but I think the functionality is so good that it could be Standard Equipment.
View detail
Type 3, with a small gap.
It is possible to install it normally, but if it is a Type 3, a space of about 1 cm will be opened between it and Upper. View detail
A little bit of a look
It is a License plate holder, not a Fender Eliminator that refreshes the Rear area, and the work is tedious, heavy, and regrettable. View detail
Y's Gear
It can be installed without hesitation.
The construction is sturdy and helpful.
View detail
The understated Fender Eliminator Kit
I think it is a solid and modest product in the OEMAccessories sense.
0Reflector is Smaller
0Key cover can be installed.
Hard to drop out with 0Lock nut
0Material:Aluminum and light
0The accompanying License Plate Light is Couplet-on and It does not require processing.
▲Seat Cowl side Bracket has vertical width
Number angles are tame in the Japanese Vehicle Inspection Correspondence.
License Plate Light is Large
▲Blinker Bracket is wide
Mud and stone splash
The installation was easy, although there were some difficulties as follows.
The coupler on the upper part of the mounting hole interferes with the Tight under the Seat on the body side, making it difficult to insert the tool.
BlinkerSpacer installation is a bit Large.
View detail
Almost no change in footing and increased comfort.
I measured it at 1G with an empty car, and it was 835mm in NORMAL, as per CatalogueSPEC.
Comfort seat is 855mm, 20mm up. The footing is as shown in the photo, and even in the Comfort seat, there is no sense of insecurity as both toes can be placed on the seat. (Height 161, no lowdown, etc.). (The picture of the footing is fixed to Camera)
The seat cover is also non-slip, which significantly reduces the possibility of shifting the seating position.
The only drawback is that the Cool mesh seat cover is not yet supported.
View detail
It got easier to ride
The high seat has better leg room than the OEMSeat because the SIDE has been made slimmer. View detail
It's too much to call it Comfort.
We believe that there is no seat in the world that does not cause pain in the buttocks after sitting for a long time. Even high-end furniture will hurt your buttocks if you sit in the same position for a long time.
The reason why we considered introducing this Seat this time is because the NORMAL Seat is so uncomfortable that my buttocks feel itchy from the moment I sit on it, and it becomes painful after 50 km of driving.
To be honest, I was disappointed in my impression of this product. I was expecting a more enveloping seating feeling the moment I sat down. ....
The seating feel is certainly improved in the NORMAL comparison. The seat surface is said to be a little less than 2 cm higher, but the amount of sinkage is also increased, so the footing is personally acceptable. However, I think that the shape of the seat is fundamentally bad. Cushioning is still insufficient to be called "comfort. The feeling of being uncomfortable has not been eliminated, but it is still better than NORMAL, and my buttocks feel completely sore after driving 100 km (this is my personal opinion). (This is just my personal opinion).
As a general comment, as a small student who has ridden 17 vehicles including mopeds, I believe that there is no such thing as a Seat that does not cause pain in the buttocks. We recommend this Seat to those who are looking for a little improvement over the Normal, but not to those who are looking for an easy long-distance touring experience.
View detail
fall (e.g. in status)
It certainly won't get hotter and Cushionability will increase.
However, it is slippery, uncomfortable with downhill Brake and such.
I'm taking it off now.
View detail
Great trunk for a trunk
About quality and texture
The trunk was bought to install a wardrobe trunk, since it was absent from the factory, excellent quality of the metal, the quality of painting is also on top, black semi-gloss color, the coating looks durable
I would also like to note the presence of fasteners in the kit, which also has a great look and quality.
About the feeling of use
The original trunk is installed in a regular place without any problems, absolutely all the holes fit perfectly into the threads on the rear of the frame
4 bolts included, no thread problems found, easy to screw in
Products to buy together
The kit includes everything you need, all four screws and the trunk itself
Difficulty of installation
Very easy installation to the right place, you just need to tighten the screws
Cost performance and comparison with other products
The price is not low, but even high, but there are no other options, only the original spare part
About shipping and packaging
The packaging can be seen in the photo, the bag with air bubbles, there was no damage during delivery
Any concerns, cautions, or advice when purchasing
I can definitely recommend this trunk, since there are no duplicates, and it will not work otherwise to install a wardrobe trunk or other box for transportation, the quality is very high, this is an original spare part!
-------------------------------------------------- -------- About Quality and Texture The trunk was bought for the installation of coffee, since it was absent from the factory, the excellent quality of the metal, the quality of the painting is also at a height, the black half -material color, the coating looks firmly I also want to note the presence of fasteners in the kit, which also has a wonderful look and quality ABOUT THE FEELING OF USE The original trunk is installed in a regular place without problems, absolutely all holes are perfectly fitted to threads on the back of the frame 4 bolts in the kit, no problems with threads were found, it is easily twisted Products to Buy Together The kit has everything you need, all four screws and the trunk itself Difficulty of Installation A very simple installation in the right place, you just need to tighten the screws COST Performance and Comparison with Other Products The price is not low, but even high, but there are no other options, only the original spare part ABOUT SHIPPing and PACKAGING The packaging can be seen in the photo, a package with air bubbles, damage during delivery did not occur Any Concerns, Countions, or Advice When Purchacing I can definitely recommend this trunk, since there is no duplicate, and it will not work to install coffee or other boxing for transportation, the quality is very high, this is an original spare part! Powered by Google Translator
View detail
Rear Carrier
I was a little worried because I had to tighten it by hand because there was a Torque and I did not have a Torque wrench. View detail
No problem
Installed on a 22 SEJ6J
Price is normal
Easy installation by simply attaching 4 Bolt
Nothing wrong with the performance, it's just great!
Top case is Endurance's GSX250R Rear Carrier+Top caseQuantity:Transplant of KMAX30 attached to Set
KMAX30 installed Base with no problems
There is only about 1.5 kg of load space in the 30LCase, but even if I ignore it and load it up, so far there is no rattling or shaking etc. even when driving on bad road surfaces, but that's probably the limit.
I think 50L is questionable.
View detail
TENERE700RALLY50Seat
The seat height is 2cm higher than the normal seat, but it is slimmer than the normal seat, and the footing is not so different.
However, it is harder than the Normal seat, so the Normal seat is preferable for long-distance touring.
Will high seat also fit in if used?
View detail