Reviews
Fits: HONDA CRF250 RALLY, HONDA CRF250 RALLY, HONDA CRF250L, HONDA CRF250L, HONDA CRF250L
Carrier with excellent design
I put it on crf250rally50 and md44.
The design is clean and it is also an excellent Grip for Tandem rider.
The only thing that is a little disappointing is that the Seat is harder to put on and take off, but compared to other companies, the quality and ease of use is outstanding.
liked it
View detail
Metallic feel is very elegant!
Installed on YB-1FOUR.
It prevents the License Plate from bending, and matches well with the Chrome plating Fender.
View detail
plug and play to gixxer 250
About quality and texture , the bracket materials are solid About the feeling of use : wont wobble during rides Products to buy together : none Difficulty of installation : easy, just remove side mirrors and install brackets and windshield Cost performance and comparison with other products : pricey compared to other products but very worth it About shipping and packaging : fast shipment and good packaging Any concerns, cautions, or advice when purchasing : none View detail
Nothing to complain about!
It's more solid than it looks.
The XSR atmosphere is sacrificed to some extent, but it is still convenient to have the GIVI box on.
View detail
Fits: HONDA CRF250L, HONDA CRF250L RALLY, HONDA CRF250RALLY S, HONDA CRF250RALLY, HONDA CRF250L RALLY, HONDA CRF250L
Too inaccurate to install
Right SideBracket was too inaccurate to install.
I managed to install the Left Side, but could not use it as a product at all, hence this rating.
View detail
Overall, KO!!!!
In my opinion, I am satisfied.
The product was also well made and easy to install, despite the large number of parts.
As expected, Daytona's products are very reliable.
View detail
Fits: SUZUKI Gixxer SF 250, SUZUKI Gixxer 150., SUZUKI Gixxer 250, SUZUKI Gixxer 250
Not a problem, but subtle.
I had been thinking about how to replace the Tandem grip, which is also a design point, but decided to compromise on the appearance for the sake of convenience. Well, the look is not that much compromised.
The box is not compatible with the product. If it's because the horizontal material is too thin, why not just make it thicker? If you use it as a grab bar, I don't think a 4kg load capacity is enough. There must be some reason. There are some people who have installed it, so I am considering it at my own risk.
There is a gap. Rather than being able to do so, the part covered by the tandem grip is exposed. I wish they would have thought about the design and covered it up a little more. I didn't mind it so much, but I will try to hide it with something in the near future.
The price and simple design are not bad, but there are a few things that are not quite right. If you are on a budget, I think you will be more comfortable with the E company's products.
View detail
It broke, so … I'm replacing it.
PODDrill while Touring!
It broke >
View detail
Fits: KAWASAKI NINJA400 (2014-), KAWASAKI NINJA250R, KAWASAKI Ninja ZX-25R SE KRT Edition, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, KAWASAKI ELIMINATOR SE, KAWASAKI ELIMINATOR
Cover the cheapness of OEMs
I put it on for appearance, but since I have a bar lock key and a traffic safety talisman attached to the main key, I thought it would also prevent scratches on the fuel cap when refueling. I think it will also prevent scratches on the fuel cap when refueling.
I think the evaluation of quality and cost performance will depend on durability.
View detail
Fits: HONDA PCX125, HONDA PCX150, HONDA PCX160, HONDA PCX125
DAYTONAMulti-carrier
PCX125 with Carrier from another company (JK05) I was using a Rear box from
I was looking for a sturdy car carrier for my partner who had bent it when he leaned on it during a Tandem run.
Buy DAYTONAMulti-carrier,
The first thing I did was to contact DAYTONA and ask them for a replacement part.
I was reassured by the reassuring Manufacturer before the product was good or bad.
Super easy to install! Much more solid than the last one.
However, it is impossible to fix 4 holes on the base of the current Rear boxSHAD in the position where the tandem is possible, but with 2 screw fixation points, it works fine.
I wonder if I can lean on the Tandem and not worry about it. It's so solidly attached that I wonder if I can lean on it even with Tandem.
I'd like to try it, but … I won't do it ….
View detail
ของแท้ ส่งตรงเวลา คุณภาพดี แพ็คเกจดี พัสดุไม่มีเสียหายครับ View detail
Fits: HONDA 400X, HONDA CB1000R, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER FOUR SP, HONDA CB250R, HONDA CB650R, HONDA CB650R, HONDA CBR650R, HONDA CBR650R, HONDA NC750X, HONDA PCX125, SUZUKI GSX-R125, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX250R, YAMAHA YZF-R25, HONDA CB125R
For One point in the License Plate Department!
I purchased it as a one point accent for the license plate section, and as a result of installation, the license plate section looks tighter! View detail
Fits: Others Universal
It was a little too flashy.
I bought this for Number protection and dress-up.
I imagined that the License PlateBody would fit in the body, but it was not quite large enough, so it stuck out. I had to put the attached cushion on it because it floated.
The frame itself is a bit Large, so in the case of Gold, it was an unfortunate point that it would stand out too much.
I think it is an Exactly product for those who like to be flashy.
View detail
Fits: HONDA 400X, HONDA CB1000R, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER FOUR SP, HONDA CB250R, HONDA CB650R, HONDA CB650R, HONDA CBR650R, HONDA CBR650R, HONDA NC750X, HONDA PCX125, SUZUKI GSX-R125, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX250R, YAMAHA YZF-R25, HONDA CB125R
Simple but well-made License Plate Bolt
I bought it for Dress-up for One point.
The screws on the license plate are the same for all car models, so I think it will fit most large car models.
After several years of use, the color has not deteriorated and there are no bald spots.
Parenthesis has a simple structure with a slit design that is compatible with other PremiumZone products.
View detail
Fits: HONDA , HONDA CB500X, HONDA CBR500R, HONDA Rebel1100 DCT, HONDA CRF250RALLY S, HONDA CRF250RALLY, HONDA CBR650R, HONDA CBR400R, HONDA CB650R, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER BOLD'OR, HONDA CB1000R, HONDA 400X, HONDA Rebel1100 T, HONDA Rebel1100, HONDA CBR650R, HONDA CB650R
Nice looking sticker on the tank!!
For my 2023 Honda Rebel 1100 - very simple to apply, just makes sure alcohol wipe the surface first and then line up the stick with the gas tank. You might experience some unaligned screws holes on the sticker, in that case use a heat gun gently on it then use hand move the stick to the proper positions. Overall - nice looking products but for almost $20 I think is little over price, and not sure how long it last. View detail
Fits: YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S
I was finally able to correct the angle to a safe one.
[How is it used?
When the Japan number was installed on the number mounting bracket of the KTM390DUKEOEM, the red reflector was facing downward, and the reflector did not reflect the light from behind at night, thus compromising safety.
Was the one you received as per Image?
I thought I have seen similar shaped Bracket in OEM Parts for domestic cars (lol).
Was the installation difficult?
The mounting holes on the vehicle body side and the holes on the Slant License Bracket side were not aligned slightly, so the holes on the Bracket side were cut off by about 2mm on the one side with a file to make an ellipse to align them. To prevent the Bracket from coming off due to vibration, I used a type of nut with a loosening stop.
How was your experience with it?
The 20-degree tilt angle is perfectly matched to make the reflector's reflective surface perpendicular and reflect light well at night.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation point and hang:When diverting the product to a car other than the compatible model, it is recommended to measure the angle of the installation part with a protractor in advance to avoid mistakes.
View detail
Smartphone Mound Bar Purpose
This is comfortable equipment for viewing Smartphone Navigation without lowering the eye level.
The installation required a 6mm Allen Wrench in addition to the on-board tool because the tool was not enclosed.
Just raising the height of the Screen by 50mm is totally windproof.
The ETC Antennas are located behind the Screen, but even if they are raised 50mm, they are protected within the frame, so rainwater will be large and strong.
View detail
The construction is neither good nor bad, but not overpriced.
The difficulty level of installation is fair, the quality is neither good nor bad, and the price is a little high for the content.
The first step is to remove the OEMFender, but the Instruction Manual is wrong from the very first step.
It says two Bolt, but I have to remove four… I can tell when I see it, as you can see in the picture.
Assembly after removal is as simple as looking at the Parts.
I would have liked the shape and overhang of the License Plate Light to be a little more manageable.
Incidentally, the compatibility with KIJIMA's LED Blinker is subtle.
As you can see in PlateBase, the Small Type-ized Blinker seems to be quite hidden.
It may be necessary to shift the Number down or overhang the Blinker at the time of inspection.
View detail
Fits: KAWASAKI NINJA400 (2014-), KAWASAKI NINJA250R, KAWASAKI Ninja ZX-25R SE KRT Edition, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, KAWASAKI ELIMINATOR SE, KAWASAKI ELIMINATOR
You should put it up.
Unlike Tank Pad, I think this one has the effect of sticking.
When refueling, I no longer pay that much attention to the key insert.
View detail
Air bubbles will be noticeable.
My first impression was that it was smaller than I had expected.
It is a little small for a Large Motorcycle, giving the impression of unbalance.
The advantage is that it is transparent and allows the best of the paint to be used, but on the other hand, air bubbles can be noticeable, so it must be properly warmed up and applied neatly.
If the angle of the tank is sharp, the edges will peel off, so you need to warm it up thoroughly and degrease it before applying it. I replaced the tank pad with another one because I was concerned about air bubbles and the shape of the smallest tank.
View detail