Reviews
Fits: YAMAHA XT250X, YAMAHA XG250 TRICKER, YAMAHA SEROW250
It is a Custom-oriented Custom
Over the OEM Chain guard, BoltQuantity : It is a Custom that is easy to install with 2pc. It is the last Parts not customized around Chain.
It is the same Titanium color as ZETADriveGuard and it looks very good with no sense of incongruity.
View detail
Making that it can not be thought of as a very exclusive item
Installation is very easy by saying Chain guard of type fixed with Screw. I bought Carbon's ones and liked it - - -. I noticed that the shape did not fit at the time of installation. I can not install it, Swingarm and Chain guard do not fit neatly in parallel like the sample photos (Chain guard itself has no problem). It looks bad like a picture because it sticks diagonally without sticking in parallel. I can not recommend it if you buy it with an appearance emphasis. View detail
It was cheap and good.
I could buy it at a price close to the half price of OEM.
The shape was also unchanged from the OEM Product, and it was able to be installed smoothly.
As for durability, I just do not know as it is just installed.
Cost performance is also unknown.
View detail
Fits: HONDA XR250, HONDA XR250 Baja, HONDA XR250MOTARD, HONDA CRF250M, HONDA CRF250L
Motorcycle gets a sense of quality.
I got lost a bit when I attached this Parts, but attached it without problems.
I think that it is very better than OEM's sense of plastic feeling.
View detail
Fits: HONDA XR250, HONDA XR250 Baja, HONDA XR250MOTARD, HONDA CRF250M, HONDA CRF250L
Satisfied with the appearance
From the functional aspect as a Guard
There is also practicality
The appearance texture is very good above all.
Although I thought that the price was a little expensive, I bought it
When you see the attached car
I am satisfied that I bought it.
View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR
Aerodynamic design is Parenthesis nice
With Double-sided Tape and the attached BoltCollar,
Mounting using the boss hole for Stand Hook
Since it can do, drilling in Swingarm is unnecessary.
Remove attached Color, Can be used with Stand Hook.
Race base When installing on a car, some Cut processing is necessary.
Included BoltQuantity : Fix to Swingarm with 2pc.
Aerodynamic design with thickness and irregularities is also Parenthesis nice.
The price is about 2 when compared with those of other companies. Approximately 5 to 3 times.
★ If you are a bit cheaper ★ 5.
View detail
Items commensurate with the price
I bought it because the price was cheap.
I think that it is a good product overall.
There is a part that part does not fit on the mounting part, but it is a commodity commensurate with the price.
View detail
Fits: HONDA XR250, HONDA XR250 Baja, HONDA XR250MOTARD, HONDA CRF250M, HONDA CRF250L
subtle - - -
As shown in the picture of webick's Page, attaching it to the inner side of the installation bracket of Swingarm, the Chain guard will slip out and it will only be attached to the outside. Or would you cut and install Chain guard?
First of all, Material : Since it is attached to the outside of Plastic's Chain guard, will it be easier to ease the shock from the side. The rest is visible. I think that the price is slightly expensive. Recommendations are subtle ...
View detail
I believed it because it is A-TECH
It is necessary processing. A-TECH in the world - - - M6 Nut mounting part for installation was not in Flat.
The processing position of the long hole on the front side was also deviated by about 3 mm and a gap was formed with Swingarm - - -
View detail
Safety and Dress-up
For safety and Dress-up, I bought it this time.
I used to run Circuit well since before, and to prevent the involvement of hands on Rear sprocket when falling, I also attached it to other vehicles.
I feel like the product name is Sprocket guard rather than Drive chain guard? - - -
With Chain guard, what kind of things are on the Swingarm?
(Manufacturer name like name but www)
I talked about it,
In 14 R there is no plan to run Circuit,
This time, I purchased it as a Dress-up effect.
In Circuit, common sense = general road, cognitive deficiency
I feel like it, there are not many people wearing it. I mean
Installation is done with a single Bolt.
With 3 minutes, I'm done www
However, because it will be attached to a curved surface with the shape of 14R Swingarm,
If you tighten it too tight, the upper part of Bolt seems to dig into it and I'm scared.
I painted the Screw lock agent and gently tightened it www
This time, Material : I ordered FRP, pasted Carbon StyleSeat, made it Carbon style.
safety - Dress-up effect - Circuit It is only a good feeling and a car feeling ♪
(It is an impression of an individual www)
View detail
For Circuitization
Installation of Chain guard is mandatory in Circuit.
I was looking for something of reasonable price and I reached this product.
I am relieved because I took it without problems.
View detail
Fits: HONDA XR250, HONDA XR250 Baja, HONDA XR250MOTARD, HONDA CRF250M, HONDA CRF250L
Also used as Extension of Guide
【What made you decide the purchase?】
Along with Rear's Sprocket Large typing, I bought it as Extension of Guide and Guard of Guide.
【How was it actually used?】
Chain made contact with Guide when Sprocket was made into Large type, but it was saved because we can install Guide with Offset if we attach this part. I think that it is fine until about 44 Large bodies.
You can also use it as Guard of Guide. I applied it considerably hard, but it has not been broken yet.
【Was it difficult to install? (Hard parts case)】
it's simple.
[Is there anything I was disappointed about?]
There is none
【Hope for Manufacturer - Please let me know if you have any improvement points]
There is none
【Have you compared items?】
There is none
View detail
Fits: HONDA XR250, HONDA XR250 Baja, HONDA XR250MOTARD, HONDA CRF250M, HONDA CRF250L
I was glad to have this
【What made you decide the purchase?】
We made Rear sprocket bigger than OEM, so it will interfere with OEMChain Guide, but if we installed this guide we could also install Offset and purchased it as protecting Plastic OEMGuide.
【How was it actually used?】
I've been hitting rocks several times, but Guide can be used without breaking.
【Was it difficult to install? (Hard parts case)】
It was easy..
[Is there anything I was disappointed about?]
There is none.
【Hope for Manufacturer - Please let me know if you have any improvement points]
There is none.
【Have you compared items?】
There are no similar parts.
View detail
Fits: HONDA XR250, HONDA XR250 Baja, HONDA XR250MOTARD, HONDA CRF250M, HONDA CRF250L
Chain guard
It is Guard of Chain Guide,
Since I have many opportunities to run Off-road I bought it,
Although the purpose is Guard, it looks well,
We are also considering purchasing Guard of Others.
View detail
I want all models Standard Equipment.
Since there is no particular attention to Carbon, I chose Black of FRP. I think that it is essential to install in case of fall. I bought it to avoid Risk by involvement. Because it takes a relatively long time for delivery, we will recommend a quick order. View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
I am wearing it once. - - -.
I am wearing it once, but it is almost inconspicuous Parts.
It is a place I can not see, but it was good if the shape was a bit more Slim.
Parts that I do not want to take care of.
View detail
Fits: HONDA XR250, HONDA XR250 Baja, HONDA XR250MOTARD, HONDA CRF250M, HONDA CRF250L
For 45T introduction
I chose this for introducing Sprotcket 45T.
Although it seems like it can go up to 46T in the explanation, complete OffSpec. If it is Chain Dardal of 45T, I am touching under Guide.
However, because it is a form to be attached to the OEM, it is very good in terms of strength!
View detail
Fits: HONDA XR250, HONDA XR250 Baja, HONDA XR250MOTARD, HONDA CRF250M, HONDA CRF250L
Good vibes
Heel Guard and how to fit in Timing.
I think that you can see it, but it became SMART.
Easy as it is about 30 minutes with Heel Guard and Chain guard bracelet.
Although I think that Accent of Red should be attached somewhere, it is almost satisfactory item.
View detail
Fits: YAMAHA XT250X, YAMAHA XG250 TRICKER, YAMAHA SEROW250
Chain guard Breath?
Generally, if you consider using OFF
A shape that surrounds Chain is desirable
But, at the SEROWOEM, only the exterior Pla Parts
It is a shape not attached.
So, full-fledged Spec. Not, but Gold exterior
It is on as if it is visible "Enjoy fashionable" like
I think it's Parts.
Installation also, ScrewQuantity : 2 pc was exchanged and the same place
Just add the Gold genus Plate and close it.
Because it is solid with Bolt on parts
Did you say that it was the biggest point?
View detail
Together with the Rear fender, the circumference of rear one was substantial.Since the position of , however the attachment Bolt to a Swing arm hides and was not visible to the flesh side of a Sprocket, the Sprocket needed to be removed for attachment
Together with the Rear fender, the circumference of rear one was substantial.Since the position of
, however the attachment Bolt to a Swing arm hides and was not visible to the flesh side of a Sprocket, the Sprocket needed to be removed for attachment.
View detail