Reviews
Caliper and Rotor outlines are hit. It becomes impossible to run.
Rotor outline hits Caliper. Not this one! View detail
Fits: SUZUKI HAYABUSA, SUZUKI GSX1300R
I knew it. The cheaper...
KFACTORY I had a hard time deciding between this and the Rear caliper support from Swing Arm, but I decided to go with the cheaper option. It is!
I thought it would be nice to have a parenthesis, but the price was too much! I'd prefer a lighter weight, but that's okay, I chose a cheap one, no problem! In my case, both Shim width and Offset, because it is installed with special support, it was no problem! Now I have a new Crab that I have left over from Monkey, but I plan to switch to CNC in the future.
To install, remove the shaft, remove the tire, and replace! It's not a pontoon, it's a GSX1300R HAYABUSA with power, why single piston?
View detail
Fits: YAMAHA RZ350, YAMAHA XJ400ZS, YAMAHA XJ400ZE, YAMAHA XJ400Z, YAMAHA XJ400, YAMAHA XJ400D
Relief
I bought this because I went with brembo.
Of course, Exactly is attached, but you need to adjust the Shim to get Center.
View detail
Fits: KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200R, KAWASAKI ZRX1100, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200R, KAWASAKI ZRX1100
Combined with bremboGP4-RS
The color looks more like Gun meta than Silver. View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200 DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S
To install the new Crab type Brembo
I used it to install the new Crab type Brembo.
I have no particular complaints.
View detail
Fits: KAWASAKI Z125 PRO
Best if you change to Crab
Changed the Front of the z125 to a Docatti for Rear OEM Brembo crab with OH.
The Center was not out because it was a diversion, but if you put Shim in and adjust it, there is no problem.
The Bolt that comes with it has a small BoltHead, so you might want to add a Washer.
Now I can stop as normally as I can on my other Motorcycle.
View detail
Fits: KAWASAKI ZRX1200 DAEG
Things are good, but the Bolt that comes with it is not good.
I bought this car to install Brembo caliper.
It has a nice texture and comes with a Shim for Centering out.
Some people don't like wearing Caliper support because it looks like Caliper is hanging down, but I like it a lot.
The supplied Bolt is an ordinary Stainless Steel Bolt with a strength rating of A2-70.
What is A2-70? If you're wondering, look it up. I'm sure it's not a problem because it's made by PartsManufacturer, but I don't think there are many OEM manufacturers that use A2-70 bolts to fix Caliper. So I changed the bolt to a stronger one, but be careful if you change the bolt.
Because it is not a common M10-1.25. Brembo caliper is M10-1.5.
It was Exactly 25mm in length. (bremboP4Casting)
View detail
Hold 320mm
First time using this platform and have to say I had pleasant experience overall. Delivery was tracked and nicely delivered. Product as described in their listing. This will probably be one of the go-to website to order any bike related items for my future needs. View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125
Speed sensor is attached, so this is the best choice.
I bought this to replace the rear caliper with brembo.
When I think only of Caliper support, it has been put on the market from various manufacturers, but in my case, it is necessary to change Speed sensor to Rear side from the reason of changing the number of guns of Sprocket with ABS, and because this was almost the only choice made by Mukawa, Caliper This is the reason why I chose the Caliper support made by Mukawa.
If you have replaced the sensor, you only need this 1pc. bracket, so the appearance is also refreshed.
The accuracy is not a problem at all because it is made by Mukawa of trust, and the core also came out to Beauty.
I have also replaced the Swing Arm with a G-Craft one, but this can be installed without any problems.
View detail
Active rear caliper support for brembo caliper
The Buco helmet with a really pretty design fits well with the purchase in the correct size. It was delivered with sturdy shipping and is very comfortable to wear. ------------------------------------------------------------ -------- Buco Helmet with a really pretty design fits well with the exact size. It has been delivered with strong delivery and is really comfortable to wear. View detail
It's a bit forced. Crying 。
This is a must have part for brembo installation.
I was not sure if it was Radial Mount or Axial Mount, but Axial is enough because it is OverQuality.
To install, just mount it on the Front fork and assemble the Caliper.
However, Aluminum Cut-out is not the same as "It's just the way it is. The feeling is ……
I think GCraft's Black Anodized Aluminum was more natural. (Sweat) 。
View detail
Fits: HONDA XR50 Motard, HONDA XR100 Motard, HONDA NSR50, HONDA NSF100, HONDA XR50 Motard, HONDA XR100 Motard, HONDA NSR50, HONDA NSF100
It's not rigid enough.
If you are breaking from the straight end of the circuit, and if you are leaning even a little bit at the entry, the caliper support will creep and you will die from the strong large vibration.
I don't think you'll feel any negatives if you don't have a short cart course in the low 20's or a large speed in town driving.
… Or maybe it's wrong to put Brembo caliper on NSR50 or NSF100 in the first place.
It's my fault that I bought a brembo for my moped Base, not the product.
View detail
Fits: HONDA GROM, HONDA Monkey125, HONDA DAX125
No problem with ABS.
I bought this for the conversion to Brembo caliper.
In the first place, there are almost no options for products that claim to be compatible with ABS due to interference problems.
The impressions of the installation are as expected of Over, the accuracy is spot on and there are almost no problems.
I think this is because of the interference with the mounting bolt of the brake disc, but I think the pad is sticking out a little from the outer circumference of the disc, so I need to check after the distance, and in some cases, I may need to shave the pad a little.
If you can tolerate this point, it is a very good product with high accuracy.
View detail
The price.
I am very satisfied with the design and accuracy.
If anything, the price could be a little lower.
Nah. To the Co-Ownership.
View detail
Fits: KAWASAKI ZRX400II, KAWASAKI ZRX400, KAWASAKI ZR-7S, KAWASAKI ZR-7, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400χ, KAWASAKI ZEPHYR400, KAWASAKI GPZ1100, KAWASAKI Z750
For ZrX400
Parenthesis by Aluminum Cut-out!
It's so accurate, you can put it on as is, and it comes with a Shim for when you need it.
I highly recommend it.
View detail
Fits: YAMAHA FZR750R, SUZUKI GSX-R1100W, SUZUKI TL1000R, SUZUKI RGV250Γ, SUZUKI GSX-R750, SUZUKI RF900R, SUZUKI TL1000S, SUZUKI GSX-R1100, SUZUKI GSX400S, SUZUKI GSX1300R, SUZUKI GS1200SS, SUZUKI GSF1200, SUZUKI GSF1200S, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R400R, SUZUKI GSX-R400R, KAWASAKI ZX-6R, KAWASAKI ZRX1200S
Brembo in Vfr
I bought these adapters for my front wheel and fork conversion on my Vfr700 rc24. They fitted without any problems. I now have the best brakes I could have on the Vfr View detail
I think it's fine, but at your own risk.
I used it in the field where I put brembo4POD on VT250 SPADA.
The one I received is the one with no problems.
The BoltQuantity is included with the Caliper.:There are 2pc.
Be sure to check the fastenedTorque properly.
I think the Pad on the inside diameter side of the disc is slightly sticking out.
I tried to put it as far out as I could, but it was still too far. (;^ω^) It's like
What does it look like in RS?
Didn't seem to be a problem on the test drive.
It may be that it is still a self-responsibility as long as the conformity is not indicated by Manufacturer.
I don't think you'll have to spend a lot of money on Ok.
View detail
Not really perfect
The quality of the bracket is good but the mounting holes for the caliper should sit lower bcoz the brake pads only attached about 70% to the disc rotor. View detail
Fits: HONDA CB1300SF SP, HONDA CB1300ST, HONDA CB1300SB SP, HONDA CB1300SF, HONDA CB1300SB
I can't start without it.
I like Parenthesis in Cut-out.
If the front is brembo, the rear should be the same.
View detail
Fits: HARLEY-DAVIDSON All Cars|Disc brake
High Grade Bracket
The Bracket only price is quite expensive, but the quality is worth the price. View detail