Reviews
I can understand Carbon, but it's pricey!
We chose this Rear Fender because we wanted to use the OEM Chain Cover as is rather than the Chain Cover integrated Rear Fender.
The shape and fittings are good! I was able to properly mount it without any modification. However, it is heavy because it is made of impact-resistant material? It is heavy because it is made of impact-resistant material and not FRP. But it is thick and well made.
Chain CoverThe price is high for another Rear Fender.
I chose this Rear Fender because I was going to paint it White anyway, but if you prefer Carbon, you might as well go with Carbon at this price.
View detail
honestly speaking, I'm not happy.
There was no other design that I liked, so I purchased it by process of elimination, but it was difficult to install.
I went to the trouble of translating the instruction manual (there was a supplement in the instruction manual that asked for input here, but I couldn't install it in any way, so I installed it in a different way.
I am disappointed that they are selling at this price point with the quality of the processing premise.
I do not recommend purchasing this product if you are looking for easy installation.
The holes in the bracket were too small to begin with, and the rubber was so tight that it was deformed when the well nut was passed through. I decided that it would be impossible, so I installed it without putting the Screen through.
Rubber is quite crushed, so it seems to deteriorate quickly ^^.
View detail
Not bright.
Blinker on moped is now LED.
The brightness was dimmer than the bulbs and did not make sense.
However, the power consumption became smaller, so I think it was effective there.
View detail
Depending on the speed range, the rating...
The OEM Meter visor was somewhat more effective than it looked, but this product is very windproof and can increase cruising speed by +20 kmh, which is excellent.
But there is a problem. That is the interference and deformation of Screen's Meter due to wind pressure.
The stopping point of the Bracket isQuantity:Pair (for Left and Right) 1 item each (Co-tightened with Headlight's Stopper Bolt) The bracket is low relative to the screen, so the wind pressure will completely hit the Meter depending on the speed of the wind. Since the supplied rubber is not enough, we attached a 2mm rubber plate. Then, we can see that the Right Side, which does not have the Meter, is deformed by the wind pressure while driving.
I feel that the upper part of the screen needs to be reinforced with a universal bracket or something, but the screen width is narrow, so I would like to carefully determine if a universal bracket can be used.
View detail
Mud Guard
It was good to have less mud splatter, but I would like to see more thought put into the installation method. I was not comfortable drilling holes in the new Fender. View detail
No parts are included. (Wiring)
The Instruction Manual included color images of the product contents. is theQuantity:Pair (for Left and Right) When I tried to replace the Relay with an LED Bulb, it did not include the conversion Wiring from the OEM.
The Instruction Manual has a Wiring image connected to Relay but it is not included. I am currently in a High flasher state and have stopped working on it.
Please respond as soon as possible.
View detail
Fits: HONDA CBR600F, HONDA CBR600RR, HONDA CB400SB, HONDA CB400X, HONDA CB400SF, HONDA CB400F, HONDA CBR400R, HONDA CBR900RR, HONDA CBR1000RR, HONDA CB1000SF, HONDA CB1300SF, HONDA CB1300SB, HONDA CB750, HONDA VFR800F, HONDA VFR800X, HONDA VFR1200F, HONDA VFR1200X, HONDA HORNET900, HONDA HORNET600, HONDA CBR1100XX
Is this Carbon Style?
I ordered Carbon Style, but what I received is more like a Check pattern of White and Black than Carbon Style.
I am disappointed.
View detail
Fits: SUZUKI V-Strom250, SUZUKI Bandit1200N, SUZUKI Bandit1200S, SUZUKI Bandit1250F, SUZUKI Bandit1250N, SUZUKI Bandit1250S, SUZUKI GSR250, SUZUKI GSR750, SUZUKI GSX-R1000, SUZUKI SV1000, SUZUKI SV1000S, SUZUKI V-Strom1000, SUZUKI V-Strom650, SUZUKI SV650, SUZUKI GSX250R, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSR600
The shape is different…….
The thing itself is very well textured and I have no complaints.
However, the shape is different,,, it is supposed to fit a 2020 SV650.
If the shape hasn't changed in FY21, it's non-conforming.
The 5 holes on the outside are fine, but the inside is obviously shaped differently.
I disconnected it and it worked well, but I have to admit I was a bit puzzled at first.
I guess if you know what you're doing, you can buy it.
Now, if only it was durable enough.
View detail
Inverter Too many failures
ELMeter itself is Parenthesis good,
Inverter has too many failures.
I replaced 3 cars in 4 years.
I doubt the accuracy of the item.
View detail
Garbage ? ? ? Wonder?
Proceed work according to the Instruction Manual, installation completed without problems.
Confirm lit.
After 2 days, Gasoline meter not lit ? ? ?
Inverter No abnormality.
If you open the Meter again and check it, it is confirmed that the flow line of the EL and the contact portion of the electrode are defective.
After that, a water temperature gauge, Speedometer and then unlit.
What is it supposed to do?.
View detail
I'm almost satisfied..
I installed it in the 2013 Deer Bell STRADA.
Although there was no statement in the notation of the correspondence year, there is no problem at all.
View detail
Visibility is extremely satisfying - - -
Although it is attached to GSX 1300 R HAYABUSA, it is relatively easy to install it if you can remove the Meter, but in 5 months or so the fuel gauge will not light up in about 5 months, Wae Big will request inspection from Manufacturer to Manufacturer Even though we will correspond with it, after all, it returns without any abnormality, again mounting does not turn on again.
Manufacturer said that there was pressing pressure on Cable, but since it is in a state that pressure is imposed on the wearing state, at the time of inspection it is probably whether the inspection was in Panel intact state.
Also, I think that there was a problem when sending items that were sent back after inspection, but despite having Double - sided Tape on the back side, the Panel was carefully superimposed and the dirt attached to Double - sided Tape Is dirtying the White Panel Cleaning up.
I took it inevitably using OACleaner etc., but a little dirt remained (^ ^ ゞ
Although I am very satisfied with the visibility, it does not become regrettable as there is any correspondence with Others.
View detail
It is better than nothing
I am looking for a transparent and universal Tank Pad and I arrived at this product.
It was more slippery than I was expecting to actually use, and the unevenness was small, so I could hardly feel Grip feeling.
Other people were also written, but quite a lot.
View detail
Fits: SUZUKI GSX-S1000F, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000, SUZUKI KATANA
Mud measures measures (Lol)
I bought it as a Fender Eliminator and the mud was purchased as a countermeasure again! Because it is Large earlier than NORMAL, it seems to be somewhat effective, but it was somewhat difficult.
- Manual version does not understand English version ... (sweat) Because it is with a photo, somehow.
Did it (Lol)
- Mounting Bracket hole and FenderBody hole are misaligned
Bracket upside down and corresponded (sweat)
It's a little disappointing, but since it's nice to see Parenthesis,
To (Lol)
View detail
Fits: YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3
Parenthesis is good if it is a distant eye
I did not like the face of my favorite car R25 so much, so I put a glasin on!
But actually wearing it does not deny cheapness ...,,
I do not mind being a distant eye ,,,
The mounting method is Magic tape, pasting Magic tape 4 points in the same place on both the Lens side and the glasin side makes it feel like sticking each other.
Inevitably space will be created between Lens and Glassan, so it seems that it is better not to use because it may be taken away on a highway where Speed ??comes out.
Oh, you can not use it on public roads. Once, haha
Cospa is not very good, but looks will go up!
View detail
Mud can reduce expectation
It is longer than OEM's Rear inner fender so it can be expected to reduce mud.
However, at the time of installation, the hole fixing the Chain guard and Hugger did not fit, and it was decided to forcibly fit the hole.
And one of the included Flange nuts was not Screwed and could not be used.
Because I am not cheap shopping, I want the quality to be firm.
View detail
05. It attached and carried out by CBR1000RR ED specification. It is written as a reverse vehicle and domestic correspondence. If a hole does not open in the EL panel itself but it is going to fix through an indicator although (the vehicle type fr
05. It attached and carried out by CBR1000RR ED specification.
It is written as a reverse vehicle and domestic correspondence.
If a hole does not open in the EL panel itself but it is going to fix through an indicator although (the vehicle type from which a red zone is different in part not suiting), however the indicator right and left of a normal panel have two small black screws of a panel stop, it will hit two screw threads and a panel will float a little.
For the reason, the origin and the EL panel of an indicator become hitting.
If it sticks carefully, and is made the surroundings of an indicator with attached double-stick tape as cautions at the time of attachment and a meter corner is not firmly fixed on a tape, either, some surroundings will also float.
In order to look for the optimal fixing position of double-stick tape, it redid about 4 times.
It worried about whether a panel is soiled in the meantime.
(It went to wash a hand about 3 times) Although it is extraction of a power source, when it is CBR, it comes from the crevice between meter couplers out of a meter at a beauty.
In my case, it took out from the position lamp just below with the attached terminal.
It is because the position lamp is a coupler, so it can exchange only there even when removing it, although a wound is attached.
The impression of vehicles changes entirely as a direction besides comment and cool is said.
In particular, it is a beauty very in the - night etc. in a tunnel and the evening.
I wanted you to have got with the place and above one which are wanted to do their best more, and to carry out a screw hole somehow or other.
In the worst-case scenario, it is considered that it is afraid, or are resisting and there is also a thing [ an exact display ] by which a panel stops touching and moving to an indicator and which no longer being able to carry out.
Although he thinks [ me, self, and ] that it attached perfectly, it worries about whether it floats, while future especially the temperature of summer is becoming high.
As the ideas and the function of goods, although it is the highest (five stars), it is this evaluation in calling it ... to threaten the original function.
How is the direction of others in CBR?
View detail