Reviews
You don't have to stand out.
If I break the Light, it will be 200,000 yen to replace the assembly, and since there is a lot of noise in various places, I had to do something.
But the Black Amiami's stand out and the ones that can be removed quickly will be taken away.
This one is clear, inconspicuous, and can't be removed quickly.
View detail
Great wind Screen
Safe packaging ! Good quality ! Nice design ! MUST HAVE ITEM ! If you have SUZUKI GSX-S1000F. I haven't installed this yet. But I think it matched very well with the GSX-S1000F. View detail
I think it needs improvement!
After installing and driving once, one of the four brackets to fix the seat came off.
It seems that the fixing bracket is attached with adhesive, and the adhesive might be weak.
Maybe the fixed Bracket in other places can be removed too.
I think that it can be recommended if you can improve the way to install the bracket.
View detail
Fits: KAWASAKI Ninja1000, KAWASAKI Versys650, KAWASAKI Z1000, KAWASAKI ZX14R, KAWASAKI Ninja650, KAWASAKI Versys1000, KAWASAKI Z750, KAWASAKI Z750R, KAWASAKI Z750S, KAWASAKI Z800, KAWASAKI ZX6R, KAWASAKI ZZR1400, KAWASAKI ZRX1200DAEG, KAWASAKI Z125Pro, KAWASAKI Ninja650R, KAWASAKI VULCAN400S, KAWASAKI Ninja400R, KAWASAKI Ninja400, KAWASAKI ER-6N, KAWASAKI ER-4N
Surprisingly difficult to attach.
Attaching the outside is difficult.
Because it is not a special product, the outside is small.
When I tried to attach it as it was, it didn't line up with the screw holes.
On the other hand, if you pull the tape forcibly, the thin part will be torn.
I tore one part off because I forced myself to put it on.
But well, the paint was peeling and falling apart, so it made a good rag hide.
It seems to stick firmly, so it is unlikely to come off.
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3, YAMAHA YZF-R3
It works without any problems!
I bought it because NORMAL Design is terrible.
Installation is easy
It's just that it's smaller than I thought it would be.
It may be a little hard to see from the front, but the brightness of the LEDs works just fine!
View detail
ODAX ODAX El Meter Panel
The OEM bulbs were very hard to see and I was not happy with the night time driving. After changing to the ODAXELMeter, night driving became much more enjoyable. View detail
Fits: YAMAHA MT-25, YAMAHA MT-03, YAMAHA MT03
It's not something you can order and buy.
The quality is low because it's just plastic cut into colored light shapes and pasted on the light part with double-sided tape.
I installed it and took it off right away because it was so lame.
The price is too much for this Quality!
RECOMMENDATION:Never buy it.
View detail
Fits: HONDA CBR600F, HONDA CBR600RR, HONDA CB400SB, HONDA CB400X, HONDA CB400SF, HONDA CB400F, HONDA CBR400R, HONDA CBR900RR, HONDA CBR1000RR, HONDA CB1000SF, HONDA CB1300SF, HONDA CB1300SB, HONDA CB750, HONDA VFR800F, HONDA VFR800X, HONDA VFR1200F, HONDA VFR1200X, HONDA HORNET900, HONDA HORNET600, HONDA CBR1100XX
FuelCapPad
This is a disappointing product, the color is totally different from the product image. The color is not what it looks like. I am very happy with this product. View detail
Fits: HONDA CBR600F, HONDA CBR600RR, HONDA CB400SB, HONDA CB400X, HONDA CB400SF, HONDA CB400F, HONDA CBR400R, HONDA CBR900RR, HONDA CBR1000RR, HONDA CB1000SF, HONDA CB1300SF, HONDA CB1300SB, HONDA CB750, HONDA VFR800F, HONDA VFR800X, HONDA VFR1200F, HONDA VFR1200X, HONDA HORNET900, HONDA HORNET600, HONDA CBR1100XX
Fuel cap pad
The product image is in Black Carbon Style, but the one we received is in Light Color.:The Gray color of this item is not very Carbon Style. I will replace it with another manufacturer's item. View detail
visually satisfied with the appearance of
Installation is not that difficult.
When painting the meter cover.
I installed them together.
It's very beautiful and easy to see when I'm running at night.
View detail
I hope this is helpful to other ZH2 riders!
I bought it as a new old car with low mileage, Fender Eliminator installed. I don't know how long it took to do it because the previous owner had it installed, and I don't know how effectively it changed from OEM. I don't know how effective it is. If you don't want to get your clothes or motorcycle dirty with the Fender Eliminator, this is the recommendation for you. I don't know if it's the quality of the product, but the surface is very grainy, like there are very small bubbles in the seal. I don't know if it's the graininess that creates the effect or if it's a defective product, but the Material:I think the size is bigger than you think. The size is bigger than you think. It depends on the owner if you can recommend it to your friends. Almost, it is appearance.
By the way, Rear suspension is usually dirty, right? lol
View detail
Brightness with presence
The brightness and whiteness are completely different from the NORMAL position bulb. It is the brightness with a sense of existence, and it becomes the safety improvement regardless of day and night. View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Fitting is not good at all.
The curvature isn't quite right and I wouldn't recommend it at all.
I will never buy it again.
View detail
Very good. There's nothing wrong with it.
I bought this to convert my SL90 to 12V.
Quality, light output, color, price all good!
I think I will buy LED bulbs from this manufacturer from next time.
View detail
The meter area will be gorgeous.
OEMMeter is tasteless, so I replaced it with ELMeter.
It works better at night than during the day, but I don't ride at night.
When you go through Tunnel is when you're most happy.
View detail
Cockpitization of Yaruki
If you don't know how to use it, go to the shop and do it.
Visibility at night has been especially improved?
I can change from Blue to Green Light with one Switch, but Blue is easier to see.
View detail
Fits: KAWASAKI Ninja H2 SX, KAWASAKI Ninja H2 SX SE
Required processing
The mounting holes do not match.
I installed it by pulling and bending each part.
I'll revert to OEM after a while.
View detail
Fits: HONDA CBR600F, HONDA CBR600RR, HONDA CB400SB, HONDA CB400X, HONDA CB400SF, HONDA CB400F, HONDA CBR400R, HONDA CBR900RR, HONDA CBR1000RR, HONDA CB1000SF, HONDA CB1300SF, HONDA CB1300SB, HONDA CB750, HONDA VFR800F, HONDA VFR800X, HONDA VFR1200F, HONDA VFR1200X, HONDA HORNET900, HONDA HORNET600, HONDA CBR1100XX
Is this Carbon Style?
I ordered Carbon Style, but what I received is more like a Check pattern of White and Black than Carbon Style.
I am disappointed.
View detail
Fits: YAMAHA MT-25, YAMAHA MT-03, YAMAHA MT03, YAMAHA MT03
A little expensive but generally satisfactory
Was the one you received as per Image?
Especially, there is no dissatisfaction point. I feel that Cospa is never the product which is good, but because the flatness of the feeling of Y's GearOEMScreen and the extremely SmallScreen which is the effect none of the North American Yamaha were dissatisfied and it chose, it is satisfaction.
Was the installation difficult?
All you have to do is remove the headlight cover with a hexagon and tighten it together with the supplied bolt and collar. There is no wobble etc. especially.
How was your experience with it?
I think the driving wind has been reduced. It is about. Originally, I didn't expect so much windproof effect on the appearance, so no problem.
[Included Parts:were they on?
ScreenBody, Collar×2, Bolt×2, Rubber×2 for vibration isolation, Instruction Manual.
[Was there anything that disappointed you?
The surface was small scratches or a little rubbed, but since it is an imported product, it is like this.
[Point and hang of installation].
When you remove the OEM Cover, the Bracket of the CoverReverse side will also come off together, but be careful because the Rubber which is bitten on the joint part is easy to fall off.
Also, be careful of the tightening torque as the Bolt is tightened with the collar in between. The Bolt can be tightened without limit, so if you tighten it too much, one of the collar, Screen or Bolt may break. Tighten in moderation.
[Others]
The size of the bolt is shown in the instruction manual. (I believe M5×30)
agent (Odax) I bought Dark smoke on the direct sales of the company, and at first they replied that the delivery time was 1 month, but it was suddenly shipped in about 3 days! (Delighted) . Maybe Manufacturer has them in stock?
View detail
Fits: KAWASAKI ZX-14, KAWASAKI ZX-14R, KAWASAKI ZZR1400
It's bright and snappy.
[How is it used?
One week after installation.
Was the one you received as per Image?
Just like the picture of the product.
Was the installation difficult?
I think it's easy if you have experience removing and installing Cowl.
How was your experience with it?
Originally I didn't plan to use LEDs, but I got the Blinker lens. [Color] The introduction of the Smoke makes it darker than expected when lit.
The result is a bright, crisp flashing light with improved visibility.
[Included Parts:were they on?
sufficient
[Was there anything that disappointed you?
Two points for me.
When I replaced the Relay, I turned the Relay body 90-degrees and tied it with a Tie Wrap because I thought it would be too much for the wiring if I installed it the same way as the OEM because the Relay body is larger and the wiring is longer.
The fact that it now responds with a slight delay after pressing the Blinker switch.
I'm just a little concerned about both of them.
View detail