Reviews
It looks nice.
Size is Large, Exactly if processed with the attached Bad.
I bought it because I like the Design. Commute For Scooter.
It is especially comfortable in summer and tough in winter and high wind weather.
View detail
Very warm, but Brake return is poor.
I installed it on a PCX125 Initial Model.
I have been using winter gloves for winter, but my hands get cold after running for a long time with them, so I decided to buy these for a trial run, which are less expensive than electric gloves and grip heaters and seem to be more effective.
The installation itself on the PCX125 can be done without any problems.
However, since the return of Brake will be slower, there may be times when Brake is applied without being noticed.
I can't say it's all due to this product, as I also have a knuckle guard installed, so maybe that's having an effect...
The effect was quite high, and even at this time of the year in December, I had no problem at all with just one thin Gloves.
If the temperature becomes so cold that I feel cold even with this, I plan to use it with hot hand warmeretc. but I am satisfied that it has been more effective than I had expected.
View detail
Good as Helmet for delivery
I bought the matte black color for a delivery job that requires a lot of taking off and putting on. Since it is a half helmet, it is recommended for use with motorcycles under 125cc, but it is not against the Road Traffic Law to use it with motorcycles over 126cc. However, safety is reduced, so use at your own risk. The fit is a large size (M size), and it gapes easily when there is an impact, but not so much that you can't see the front or that it comes off. It does not gap so much that I can't see the front or take it off. I used double-sided tape to hold it in place because the interior mesh fabric floats and gapes when you take it on and off. When I put the helmet completely on my head, my large ears break inside the ear pads, but it doesn't hurt. The Shield is not designed for use with Glasses, but it is not impossible at all. [Color] The Bubble shield is a little distorted in the view, but it was acceptable.:Pair (for Left and Right) If the screws of the shield are loose, the shield will remain raised and will not stop, so it is necessary to retighten them. Wind cutting noise is heard, but it is good as it suppresses speed. The Chin strap is convenient because it can be released with one-touch. I am satisfied with it for my delivery work. View detail
It works fine
It was easy and fixed my phone with no problems. View detail
Helmet suitable for CHOINORI
I wanted a lightweight Jet Helmet for when I go out for a bit in that area.
This helmet is designed for mopeds, so it is not recommended for long-distance rides at high speeds, but it is useful for casual trekking in the mountains nearby.
Anyway, it is lightweight and doesn't feel oppressive. I like the fact that I can just put on a little bit of it and go.
View detail
I bought this for my motorized bicycle only.
Buy LLSize
Reason for purchase:I was looking for a helmet that I can wear when I go shopping in the neighborhood with my CUB or Scooter. The helmet with sun visor is a pass because the cap is too large, and the cheap helmets with sun visor are not good for me.
General comments/Considering the price and the finish and quality, this is a good Helmet for use on a motorized vehicle.
Good point* It also has PSC/SG in case. it is ABS cap, so I don't care to use it for motorcycles, even if it is good enough for motorized vehicles.
If you buy a Japanese hat, you will be disappointed because ARAI, SHOEI, and OGK are made with the head shape of Japanese. You need to adjust the interior by yourself after buying.
The one-touch chinstrap is good, but the width of the chinstrap is rather narrow (20mm), which is not so good if you are used to ARAI, SHOEI, or OGK, which have a standard 25mm chinstrap.
View detail
Daily use.
I bought this for spare parts.
I searched for it but didn't find much on the web, so I bought it here.
View detail
Daily use.
I bought it because it broke when I loosened the Bolt in Shield Maintenance. View detail
It was ExactlySize.
This is my first purchase of Helmet for Motorcycle.
I have to be an XL to fit in hats and for MotorcycleHelmet, but this item was an exact size. It is a little tight when I put it on, but if I put it on from the back to the front, it is not so hard.
I chose Red to stand out and it is a beautiful color.
Wind CuttingThe sound is adequate. It is not so loud that you cannot hear anything around you.
I was able to buy less than $1,000 more than other Sites and it was a great deal.
It seems that spare parts can be purchased and will be useful for a long time.
View detail
Now you can still ride Motorcycle!
I had an old helmet that I had been using, so I decided to buy it after filling out a questionnaire and having the return label sent to me in advance.
I thought this helmet was for motorcycles under 125cc, but the instruction manual indicated that all engine displacement volumes are OK.
The fit of the helmet was not as good as the A, Y, etc. helmets, and the included sponge was not enough, so I used other adapters.
The only thing is that it is still brand new, so I had to apply a small amount of ShieldGrease to the SEEDLE to get it to open and close properly.
It also helps that the chinstrap can be closed with One-touch.
Also, although it was brand new, there were some scratches on the paint, but I decided to put up with it because of the price.
I'm off to fall Touring now, of course, drive safe and don't let Helmet play a role!
View detail
Countermeasures against the west sun
It is mounted on a LEAD APRETJet helmet.
I have been using Smoke Shield for a long time because I still get dazzled by sunlight when I run during the day.
This was my first LEAD product and it was pretty dense. [Color] It's Smoke, similar to Company A's darkest, until now, in the evening. [Color] I had replaced it with ClearSEEDle, so I thought it was a good idea, but to my surprise, the SEEDle could not be removed and attached with one-touch, so I had to remove the Screw and replace it.
Well, it's OK because it doesn't take more than an hour to do the work, but if you don't replace the parts before dark, it will be a problem if you drop the parts on the road.
View detail
The tactile interior is comfortable to wear and the cosmetics are great!
Reason for selection:This is my first ReturnRider in 37 years, since the VT250Z when I was a student!
At that time, I was using a new SHOEI helmet for VT250Z from MARUSHIN KOGYO Helmet which I used for mopeds.
I was excited to buy it. I was very excited to buy it, and when I redebuted it, I searched for information on the Internet and found that ARAI, SHOEI, and SHOEI were the only two companies that had the same product.
When I checked carefully, I found that a new force, Kabuto, was popular among the two large giants of the industry, and I found that it was the same one that I had been using when I was a student at that time.
It must be OGK, a Helmet regular at Home center.... Then other regulars at Home center
I looked up LEAD Industries and Marushin Kogyo and found that they are also doing well, and I found LEAD Industries' System helmet.
I found REIZEN! Jet is comfortable to use in the present two, but when it comes to safety, I still want to protect the chin area.
All Engine Displacement Volume correspondence narrows it down to RYUKI and REIZEN, and the Logo mark of OGK is a family crest even if I see it again and again to me.
I felt that it was too expensive and I didn't like it, so I rejected it. I decided to go with REIZEN, which is quite reasonably priced and has a good reputation on Net!
Fit:I have a slightly firm body shape with a head circumference of 59cm, and I chose the L size.
Soft fit feeling! I have a flat top of my head, but no pain on the top or side of my head.
Quality/texture:I contacted the nearest LEAD stores to touch the actual products of both RYUKI and REIZEN, but none of them had the actual products.
I bought it from Webike, believing in the Net information. The material is soft to the touch, comfortable to wear, and the weight is the same as RYUKI.
The quality of the product is as good as the quality of the product, and I think the price is satisfactory.
Functionality Ventilation:Ventilation is effective on the top of the head even at low speeds down the road. Wind noise starts at speeds above 60 km/h.
Larger, but can pick up enough outside sound.
The point of concern, as mentioned in others' reviews, is the Nylon band on the Ratchet Type Buckle on the chinstrap.
is quite thin and not reliable, and I believe it because it is compatible with all Engine Displacement Volume....
Design The cap appears to be Large size (I am not tall, but Balance is), although the opening is wide and visibility is excellent.
The rear view is SMART and good.
I think I can do without the REIZEN Logo on the side....
View detail
Helmet Evaluation
Size:The free size was a little on the large side, but there is no problem as it doesn't shift during driving. View detail
So-called Lee Vise or Fender's Replica
The spec. of STAR II for RepairPivot kit has been changed and it is no longer usable at all. (This is the Size XL version of the company's 100R, which is different from the 200R.)
The head is about the same size as GramStar's XL, and the cheek pad is slightly tighter.
When it is lined up with STAR II, the logo of "O-Decoration" (it is a seal, so it is claimed that it can be peeled off) and the overall forme show a lack of confidence, and the chinstrap has a One Touch Buckle and the edge rubber is in a strange position, which are not so nice in accordance with the price. The jaw strap is One Touch Buckle, the edge rubber is in an odd position, and so on.
View detail
Necessary and sufficient I go out easily!
I usually Full face, but I bought it for my motorbike.
I can put it on quickly, feel the wind moderately, eat and drink with it on, and feel comfortable and secure enough.
View detail
Highly visible
I usually use LEAD's Jet helmetFLX.
I looked around to buy a full face, but I decided to go with LEAD because of its cost performance. The soft interior gives a good fit. I think it is perfect for daily use plus occasional touring.
At 1/3 the price of SHOEIARAI, I have no complaints about this construction.
View detail
No wetting?
We used it for an overnight Touring.
Even when it rained, I was able to run without getting my boots and even my socks wet. (If it rained only one day, I would still go running the next day, and if I got my boots wet, my mood for the rest of the touring would be downright miserable.)
I measured the outside Size of the Boots and purchased them, so the fit is almost perfect.
The Magic tape holds them securely in place, and when worn under the Rain jacket pants, they will not flop around when running.
The Elastic band can also be folded for compact storage.
We have some concerns as we continue to use the product.
Rubber bottom, Elastic band durability (if you commute in the rain, you will be especially concerned about how long it will last)
However, it looks like we won't have to worry about replacing it for a while.
I don't feel like stepping into a footpeg.
The bottom of the Rubber is flat, so I felt that the footpeg has a thin feel when stepping on the footpeg. Scooter does not seem to have anything to do with this area.
View detail
I wonder if it's worth the price.
Size:It's Free, but it's a Large size. I usually use size XL, but there is plenty of room.
The build and interior are well-priced. Wind noise is also quite loud.
Ventilation doesn't work either, like a bonus.
I like Graphic and use it for a little ride!
View detail
Yoshi Yoshi
The Pad is thick and soft and has a good fit. Inner Shield is too close to Glasses and I hardly use it.
I think the wind noise is also suppressed; I hardly feel the Ventilation is effective.
I have some concerns about the design, but the design looks high and Parenthesis is a good Jet.
View detail
It's cheap and nice.
I bought it because I like the shape.
Fit feeling was good.
View detail