Reviews
Screw holes don't match.
The screw hole on the Right Side must be re-machined to fit.
If you overdo it when installing, the receiving side will be damaged.
View detail
I like the Style, but the quality is …
This is a change from the Handlebar Up Type of W650.
The Clamp width of W650 is 110mm, so I was looking for just the right Size, and I liked Style so I bought it.
It's a little lower and narrower, and I like it because it looks like an old foreign car.
The only thing is that there were quite a few minor scratches that were crumbly and cloudy on the surface in some places, and if you don't polish it with Compound, it's pretty obvious.
Quantity:Pair (for Left and Right) The angle of the diagonal rise of the …s also seems to be slightly different…Is it an optical illusion?
I couldn't really tell once it was installed, but I'm not sure about the quality at this price.
View detail
It can also be diverted to CUB.
I used it when I installed Wills Win's Taste Exhaust System on my SUPER CUB, it interferes with the OEM Pedal…
I know it depends on the year, but if the Kick pedal interferes with the Exhaust System, this will solve the problem.
good point
Nostalgic design
Not only CUB, but also DAX, MONKEY, etc. are compatible with HondaHorizontal TypeEngine.
The Arm is open to the outside of the CUB's OEM Kick pedal so it does not interfere with the exhaust system.
A bad point
I've been using it for a few years now, and I'm very happy with it.
It's a shame that you can't install your favorite exhaust system because of the interference. In such a case, there is a way like this, so I thought it would be good to have it as a reference.
It was a good purchase
View detail
good
The seat was torn, so I bought it The appearance was quite different and good The quality is also good I just need to process it when I install it View detail
Fits: HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON SPORTSTER Family, HARLEY-DAVIDSON SPORTSTER Family
Parts Shop K&W Custom Sheet Tuck Roll Type
Packaging came with damage box. Seat torn about 1.5cm Seat pan below oily and scratches. Very dissapointed and sad to receive it like above mentioned Sending dispute to Webike dtd 10-June-2020. View detail
Looks good
The connection of the rim is uneven and the construction is rough
It doesn't run fine, but it's a critical component
I'm afraid it's going to break
I don't advance it to people
View detail
It says it fits the W650, but..
Buy 3Inch, Round Type, Classical Design, good texture, but Arm? I think it means that it can be installed
The design is good, it's not invisible, and a visual check of the rear is essential, so this is what I'm talking about It's good
View detail
Fits: SUZUKI Glass Tracker Big Boy, SUZUKI Glass Tracker Big Boy
Industry student's student Level.
1. Female Screw defect in mounting part of Change Pedal. (Namelu putting male Screw)
2. If you do KICK you will be caught by Footpeg Holder and will not come back.
3. Accuracy of mounting hole is bad and can not be installed on Smooth.
4. Right Side Main Footpeg Bolt is not included. (OEM Product Unusable)
5. The attached color is not straight and BALI is terrible.
Also, I requested to fix the female Screw defect, but I fixed it myself because I did not fix it.
Holder thought that it was a waste of time so I fixed it myself.
There is no problem with Position and operability (Naturally it is) I am using it, but I can not recommend it to people, I think that we will never buy the product here again.
View detail
Not at all
Bending is dirty with a PRESS trace attached. Machining accuracy is also bad, so it can not be installed properly. It seems that neither responsibility nor Pride exists for the production. View detail
Poor quality mirror
I would not recommend these mirrors. Bye this to my Yamaha Wild Star 1600. The mirrors started to rust right away. Poor quality. View detail
Fits: KAWASAKI ESTRELLA
Almost defective item Level
For the first time I made this kind of poor accuracy Rim. Nipple jumps out on the Tube side even if the Nipple dent of Rim is made shallow. It is not Ginya Nya that is not the Level of Rim's freak. If you tighten in Nipple the angle does not match delicately and Spoke bends. View detail
Update on tank after 2 years... Worthless should send back my $ plus some..
DO NOT BUY THIS TANK !! ITS THE WORST EVERYTHING WELD HAS FAILED MORE THAN ONCE.THE METAL THEY USED IS WAY TO THIN AND WORSE THE FRONT MOUNTING POINT ON THE FRAME IS meant TO HOLD A LITTLE EVSP CANISTER .. NOW ITS HOLDING A 10LB GAS TANK.. UGG SO AFTER FIXING THE WELDS 3 TIMES NOW THE FRAME TAB BROKE OFF.. Oh on top of that the liner inside startd coming off almost immediately in little pieces and cloging the cheap petcock that started leaking I would stay away from any tank this company makes.. View detail
Fits: HONDA MAGNA(V-TWIN MAGNA), HONDA Magna (V-twin Magna), HONDA Magna (V-twin Magna)
Stainless Steel is
Mainstreaming at other manufacturers is Plating
This item is Stainless Steel
As long as you do not polish, you will lose the glow but feel safe without rusting
If you are going to use it for a long time, here is recommended.
View detail
Stylish but bad quality
Even though the motorcycle is stored inside at night, after a month of installing them, there are rust marks all over them. Would not buy again. View detail
The strength of the Bolt fixed part is difficult
The part fixing SeatRearBolt is the same as the resin on the back side (Seat back resin only extended length) So strength is not enough at all.
I was damaged at the time of installation.
Since I installed the Backrest Set with Rear Carrier, I can fix it in a pinched way so I managed to - - -
Even if it is installed properly it is certain that it will be damaged by running vibration etc.
It will be tough if you do not reinforce yourself by installing Bracket for fixing Bolt - - -
Seat itself, given the price of sweet things, well satisfied.
Sitting comfort is inferior to OEM but it is not bad as it is.
(Although spodine will become hard due to aged deterioration)
View detail
Fits: HONDA JAZZ
note : It is a straight pipe
It is a pipe because it is a pipe (It's not a level that can run on a public road very much).
Since Kick pedal interferes as I install it, I purchased KITACO's Pedal additionally.
Since the Exhaust pipe is in a considerably low position, it rubs with a slight step.
I ran and removed myself.
View detail
Fits: HONDA Shadow Slasher 400, HONDA Shadow Slasher 400
Because the car model is a car model - - -
Purchased here because there was no other PosterTank for Shadow slasher.
It is full of handmade feeling, and it is waving, the decoration of the welding surface is bad, it takes time to delivery, so it is essential to fill the Pate after all.
It may be unavoidable to think about the price because the car type is Minor - - -
Once there is no leak, you can use it, but Pateetc. , Small It was a certain item that I had to work.
View detail
Hello, I am from Singapore, the red dot. I have recently bought this item and apart from the shipping service (which is very good), the workmanship of the item is superb except that it was not stainless steel or the very least layered in epoxy paint. D
Hello, I am from Singapore, the red dot. I have recently bought this item and apart from the shipping service (which is very good), the workmanship of the item is superb except that it was not stainless steel or the very least layered in epoxy paint. DO NOTE that it will get rusty in a few days of installation. From my experience after installing and taking out again, my advice is to paint it from installing it. View detail
This tank is built well .. But it is just a stock peanut tank ( not a flat bottom tank has a tunnel) with some flat steel bent to match the mount holes witch is ok.. But the bus Prob is the liner inside .. my Thoughts is in Japan the is no ethanal in the
This tank is built well .. But it is just a stock peanut tank ( not a flat bottom tank has a tunnel) with some flat steel bent to match the mount holes witch is ok.. But the bus Prob is the liner inside .. my Thoughts is in Japan the is no ethanal in the gas because the because the liner line is coming off in little pieces and is a hitch to get out and clogs the petcock.. That's a bitch! So I would say skip it and make your own.. 2 stars.. View detail
Fits: YAMAHA DRAGSTAR400, YAMAHA Dragster 400, YAMAHA Dragster 400
Although it was not necessary forcibly.
Exchange Air cleaner to install the company's Push rod cover. Because my vehicle was Injection's FI, I did not know the difference in the diameter of the Air inlet with Carburetor Vehicles and contacted Manufacturer, but I have not installed it in FI Vehicles, but the inlet is not much different from Carburetor Vehicles By purchasing, for the time being.
After removing Normal cleaner, the location of Don Pissha, installation Bracket is the same, exchange is completed in about 15 minutes. In terms of performance, the inhalation sound became Large, so I do not feel much like the power up. It looks different, so it might be good for those who want to dress up.
As you can tell CustomCleaner in general, it is wary of rainy weather.
View detail