Reviews
Fits: KTM 790 Adventure, KTM 790 Adventure R, KTM 390 ADVENTURE
Increased highway comfort
The size is Large, so I was worried about visibility at night. [Color] I bought Clear. But the look. [Color] Regretted that I should have made Smoke.
If the Handlebar is raised more than 3cm, the Knuckle guard will slightly hit the Screen with the Handlebar fully locked.
Windproofing has been increased and high speeds in winter have become more comfortable!
Another good thing about Screen is that it does not blur at high speeds.
View detail
The position is ….
It may be an individual difference, but when installing ( 9gt+) After alignment, the upper Screw position is set to "Quantity".:Pair (for Left and Right) I managed to get it on by bending the Screen. Also, it is unfortunate that it touches the Reserver tank of the Brake a little when it is fully locked at the bottom.
I think the installed Style is good, so 3 stars.
View detail
This is the kind of Screen
I personally did not like the design of MT-07 after most of the screens were installed, probably due to the mounting position of the Light, but with NAKED, it is like a battle against wind speed at high speeds, so I had no choice.
Since we wanted to avoid a large, prominent Screen, we chose a Type with a transparent top.
Middle type in terms of size (Small Type?) Although it cannot be said to be strongly effective, it seems to have slightly reduced wind pressure hitting from the chest down at high speeds of 80 km or more, but a larger type would be better if the wind protection effect is to be enjoyed at the largest possible size.
As for the installation, I think it is easy and even girls who are not good with Machines can do it.
Since the meter is in the front of the car, there is space for a pair of shoes between the meter and the screen, which is convenient for placing gloves or other items.
You could say it's a waste of Space, but … sweat.
View detail
For appearance and windproof effect.
I bought it for its look and for windproofing when driving at high speeds.
Installation requires no special tools, and anyone should be able to install it easily.
For something like RubberTube to put on the edge, you can put a marker in the middle and grind away at it to get Quantity.:Pair (for Left and Right) I was able to attach it symmetrically and cleanly.
I can't say how it looks because I think it depends on your taste.
As for the windproof effect, in my case, my neck and other parts of my body would get tired after driving long distances at 100km/h on the highway. It doesn't have that much of an effect." that was it
So I'll drive slower on the highway.
View detail
Installation instructions are only a few pictures.
The wind from the CB was too strong, so I chose MRA, which I have used before to alleviate the problem. (200 yen each) I bought a new helmet and adjusted it to reduce wind exposure from city to highway, but it doesn't hit me too much up to the shoulder, but on the highway, I'm worried about wind cutting noise to the helmet. (CUBT RT33) Well, it is a commuter main so I am focusing on wind reduction. Two types of Torque are required for installation:T40 for removing the Light and T25 or T30 for the back of the Meter, and if the screws are tightened in the wrong order with the tools I have, it was troublesome because I could not add more screws later. I added a RubberWasher to the front and back side of the screen. View detail
Reinforced windbreak!
The OEM size is small, so I put it on hoping it would be windproof!
As a matter of fact, I mistakenly bought Touring because I thought it was bigger than RACING lol.
It's quite a bit bigger than I thought it would be, windproof to the max, but I felt like a Shield ghost… lol.
Oh well, I'll just have to get used to it and figure this is as good as it gets!
The product is solid and sturdy!
View detail
[Color] Smoke? [Color] Which is correct?
Product photos are [Color] Looks like Smoke to me. [Color] Clear arrived.
In the case of Smoo, it took me about 3 months to get an email saying it would take a long time to deliver the product. [Color] I thought Smoke would deliver, which is correct?
It seems to be slightly quieter at about 120/km/h.
View detail
Improved wind protection effect and texture
I used to have a MRAScreen spoiler type (MRAScreen spoiler) on another Motorcycle. [Color] (Smoke), and since the windshield effect, quality, design, etc. were good, we installed it on the motorcycle in question as well. Since there was no screen spoiler type available, a touring type ( [Color] (Smoke). The difference I felt was that the end part of the screen did not bounce up, so the wind did not go up as much. The screen is a few centimeters longer than the OEMScreen, so there is more area that is not directly exposed to the wind, and the screen has been extended to the top of the electronic devices other than navigation (Radar etc.), so the wind is less likely to hit the RadarCase, making it easier to see.
We have not run in the rain, but we anticipate that the RadarCase will provide rain protection.
View detail
I can feel the effect at high speeds, but the installation...
Used for high speed touring and general road touring.
The screen itself has no problem in terms of strength and transparency (clear type), but there is something wrong with the bracket that is tightened together with the Handlebar Clamp.
I found it difficult to understand the English version of the Instruction Manual for installation, but when I temporarily fixed the bracket referring to the photo, the position of the tip of the bracket was too wide to match the position of the hole in the screen.
I think a GSX-S1000 type Handlebar Clamp would work because of the narrower clamp hole position in the front, but the name of the product is GSX-S750 17-" And it's like...
I had no choice but to bend it.
As a result, we were able to install it securely with no problems.
I did not request a replacement this time, so I cannot judge whether this is a normal product or not, but I hope this will help you to know that such things can happen.
But really, Instruction Manual is hard to understand, so you might want to work with a comfortable mindset.
View detail
pure, although attached to GPZ900 -- although the point which becomes short more nearly somewhat was not quite satisfactory, since there is individual difference, is it O as me? Although attachment had trouble [ problem / of the configuration of a mot
pure, although attached to GPZ900 -- although the point which becomes short more nearly somewhat was not quite satisfactory, since there is individual difference, is it O as me?
Although attachment had trouble [ problem / of the configuration of a motorcycle ] somewhat, attachment of it was completed safely.
Although the comment to attach have not carried out high speed driving yet, resistance of the wind was made to reduce considerably to the usual run.
It is good in the touch tightened also in design.
View detail
Mall Clips
If you do not pinch the braid clip very tightly, the clip will come off when you remove the motorcycle cover or while riding.
I only need Clip this time, so I bought it. 。
There was no need for a mall.
It would be great if you could only sell Clip.
View detail
Well, the windbreak is not so bad.
I'm using it on my SV650ABS.
Installation is easy. As long as you have the tools, I don't think you'll have any trouble.
The design is rounded line, and I think it's the best parenthesis among many Screen.
As for the feeling of use, since the Screen bar is fixed to the HandlebarStem, the bar interferes and restricts the installation of ETC. As a result, the Handlebar area becomes a mess.
As for the windproof effect, I have not been able to compare because I have only used this, but the wind hitting the body (chest) has decreased.
However, it seems that the wind concentrates around the Helmet. (It may be my imagination)
View detail
It looks good, but Wind Cutting is great because the height is lower than OEMscreen.
As the title says, it looks good, but Wind Cutting is great because the height is lower than OEMscreen.
I thought about Touring use, and as a result, I replaced it with a Screen Touring.
URL → https://www.webike.net/sd/3459726/
Look → Original
Touring → Touring
It is good to use it for different purposes as shown above.
We have 3 Type, but we still have not installed Screen Racing.
The video was taken with Screen Original installed, but the Wind Cutting sound is great compared to OEM Screen.
[How is it used?
Street riding & Touring.
Was the one you received as per Image?
It is shorter than OEMScreen.
How was your experience with it?
Wind Cutting is increased because it is shorter than OEMScreen.
[Points to note]
Please crimp the attached braid with the attached Bracket.
How did it compare to other products?
Recommend Touring for Touring use because it is shorter than OEM Product.
Other items that would be helpful
Point of installation and hang/attached braid crimp on the attached Bracket.
Items to buy together/Resin Coating Agent.
Comments and Requests to Manufacturer/I would like to see the braid and Bracket sold with Maintenance supplies.
View detail
Affordable
It is easy to install on Screen at an affordable price.
Recommendation for those who are concerned about the outside of the Screen.
View detail
I removed it
I installed it because it's an MRA screen, but the RNINETscrambler has a I took it off because it didn't look good on me
I think the regulating effect is like... Even if I put it on or off, it didn't change that much
I was hoping to make it a little easier for Touring, but it didn't work and Styling was not very effective It made no sense
View detail
So so
First of all, it was easy to install, and some parts were hard to understand, although I could understand them from the pictures alone
This one had two noticeable scratches in it, which is a different story The rest of the time, the Bracket is rather tough, so etc somewhat with the Smartphone Holder If you're there, you might get a cluttered feeling
View detail
attachment
Easy to install, 15 minutes if you get the orientation right Hexagonal Wrench required Overseas Translations in ones (not accompanied by an Instruction Manual, which you can enter here) What if it exceeds 100? View detail
The overall impression is tighter and tighter
Ordered last Dec. 15, 2011, WEBI shipping date is March 18, 2011, with Gradation If the case is manufactured in Germany and then shipped What was that statement about shipping in as little as 3 days?
The product is very high in perfection as expected of an MRA No air bubbles and beautiful shape
The ends are sharp, so you may want to cruise the braid (included)
The maul is the perfect length and I cut it a little bit
I closed with Pliers because it has Crimp of the Gold genus on it
It's dangerous to have something sharp in an accident If it's a cut finger or something like that, but if it's your arm or neck, you're in trouble
The MRA Series is available in two shapes, RACING and TOURING It's the one where the Center is mocked up in RACING
There was a little bit of hole in the installation, but in the case of Ninja1000, it is RubberNut, so it does not stick There is no problem, but there is a strange noise when adjusting the height of Screen It might be a little distorted
When the Screen is down, the clearing effect is effective for humans as well Visibility is fine
I haven't experienced the number one standing position yet as I've never used it except on the highway
I'm happy with how it looks and feels
View detail
I've heard that foreign products aren't good, but not this good
Installation seriously sucks!
The holes don't fit and can't be fixed, so I was able to use the OEM's to match them and put them on
There's a little gap in the center 。
No foreign products
However, the rectification effect is good
Compared to the NORMAL Screen, it is quite preventable
What a waste
View detail
what?
I do not know whether there is a rectification effect or not. Screen can be Large, but the effect of Flap for rectification is not well understood. View detail