Reviews
False DesignBikini cowl
The wind protection is perfect for the Naked motorcycle and the Style and Parenthesis have improved. The wind protection and stability at high speeds are just what I expected. View detail
The Carbon color together with the Cover gives a sense of unity!
[How is it used?
I was looking for a tank cover with the same design as the image and came across this cover by Forss Design.
Was the one you received as per Image?
I was a little concerned because it is quite thin, but it fits the curved surface of the Tank perfectly and the functionality is promising enough.
Was the installation difficult?
It is easy to install with double-sided tape as long as the alignment is good.
How was your experience with it?
At a glance, it looks large and flimsy, but after installation, there are many areas hidden by the seat, and the bumps are hardly noticeable.
[Included Parts:were they on?
Sticker and Instruction Manual are included.
[Was there anything that disappointed you?
Nothing in particular, but I am concerned about durability in the future.
Although it is a bit expensive compared to other tank covers, the quality and design are excellent, and I highly recommend this product.
View detail
Pricey but satisfactory
We rate the overall rating as 4 Stars, but it is as close to 5 Stars as possible.
One good point is that it is highly accurate because it is made-to-order. The position of the mounting holes is also excellent, and the clearance with the tires is good.
The bad points are that it takes a long time to receive the order and the price is high. Both of these points are unavoidable due to the nature of Made-to-Order, but I think it would be better if they could be improved.
Despite the bad points, I am very satisfied.
View detail
Product Evaluation
The product is great. However, the delivery process was the worst. View detail
Mounted on cb400sb
I was hesitant to go with the cheaper Carbon Style, but I decided to go with this product since it is so much more convenient.
I removed the side cover and lifted the tank a little before installing it, but it looked like I could put it on without touching the tank.
I am glad I put it on because of the texture.
View detail
Texture Large width up from NORMAL!
Prices are expensive, but Material:The texture is up from NORMAL with Carbon.
My Initial ModelCB is Material:The plastic cover was a reduction in cost, but now it looks much more luxurious.
The weight is not much different, it is light, and there is nothing wrong with it as long as you can ignore the price.
View detail
review
Waited a long time but the sound is great. the color is beautiful. I don't think I'll be able to sleep twice because I've waited so long View detail
![Chain Cover TYPE-N [Standard]](https://global.webike-cdn.net/photo/impression/0e/0eccbb52bec5d8fc882ff75874cb849eL.jpg)
Tighten the Swing Arm area.
The OEM Chain Cover is made of Stainless Steel material, which is not bad in texture, but I wanted to add Accent to it since it is the same color as the Swing Arm. The size and fit are the same as OEM, so the role of the Chain lube is the same.
Parenthesis is good!
View detail
Quality is so high!
It was a made-to-order product and took several months to deliver, but it was worth the wait.
The level of dimensional accuracy and finish is much higher than other Carbon and FRPManufacturers I have purchased from in the past. The price is right, and I highly recommend it!
View detail
No buzzing sound
I bought it because I was getting worried about the Cowl's chattering sound and was fed up with the insect attack caused by the wind pressure concentrated on the Helmet's shield.
The shield is thick and the base part is separate, so the installation part has a solid and rigid feeling, and I think it is worth the price. I was able to install it smoothly as per the instruction manual attached. However, the double-sided tape that attaches the rubber is weak, so I had to replace it with a stronger type to prevent the rubber from shaking.
After the installation, there was no noise and the wind pressure did not hit the helmet shield directly. In terms of style, the front is a little more powerful. I think the balance is good.
View detail
good
Installation was Large odd, you have to remove the Rear suspension to get it on. Once installed it looked great. View detail
Exactly
The best. As I said, I couldn't install it myself, so I brought it in to my trusty Shop. View detail
good
I had to do a lot of work before installation because I had a two-pipe exhaust system. The instruction manual was very easy to understand and prevented me from self-destructing. I took it to a nearby Shop and it was done in 1 hour. View detail
Dress-up of the rear area
With twill weave full carbon Spec. Slit, the appearance has become Race ish.
It also prevents mud splashing, so I'm Large happy with it on!
View detail
Glossy, Twill Weave Carbon?
[Was the one you received as Image?
Texture and quality are perfect!
Was the installation difficult?
Screw one and you're done.
How was your experience with it?
It looks awesome!
View detail
Excellent work.
It is a little tricky to install, but the finished product is very good.
The look of the Fender Eliminator is tighter and better than expected.
Thanks to the producers!
View detail
CB1300SF SC54 2018MODEL Bikini cowl
[How is it used?
Was the one you received as per Image? Almost as per Image
Was the installation difficult? Easy
How was your experience with it? Still unused
[Included Parts:were they on? I didn't include one of Bolt's transparent Washer that holds Cowl and Screen in place.
[Was there anything that disappointed you? You can't tie the lower Cowl and HornStay together with a Tie Band. I wanted to think of some kind of mounting Stay.
Other items that would be helpful
Point and hang of installation/Availability and clarity of Instruction Manual/Points to note/Items to buy together/Opinions and requests to Manufacturer Too slow delivery! I ordered on 24/11/2020, the first delivery was on 2/4/2021, from there I was informed of 3 delays and the final delivery was on 3/4/2021. I was so disappointed that I didn't even cancel my order.
View detail
Parenthesis good!
The installation process was a little tricky, but I'm very happy with the parenthesis improvement! View detail
CB1100EX side cover
Beautiful side covers, the design and quality of craftmanship is excellent. The perfect cosmetic enhancement to add a little more classic styling to your Honda. I chose the side cover with no recess for the CB1100 decal because I wanted to use the retro 1100Four decal (shown in the photo). I am very happy with them, the black and red design really compliments the bike's overall classic yet tidy appearance. I highly reccomend this side cover to anyone considering replacing their standard aluminium covers. View detail
It feels good to fit in when installed
It looks and feels good to fit
It didn't take much effort to install it, and it fit in nice and easy
The color is nice, not too light or too dark
View detail