Reviews
Inspection results show that the product is good.
It rotates when I mount Smartphone though there was it in Review of other people when I actually used it. It occurred even in the situation that it did not start yet immediately after installation. There was no such phenomenon when I checked the actual product at the motorcycle goods store nearby. Therefore, I asked them to inspect it. However, the result of the inspection was that it was a good product. In the end, I was told that my combination was bad. All of the parts are from the same manufacturer and the tightness of the arm is subjective, but I think it is Level without a problem. This product was originally designed to hold a smartphone in place, but it doesn't fulfill that function, yet the seller insists it is a good product. I bought this product because of its high rating, but if you see this review, I suggest you don't buy it. View detail
Fits: YAMAHA YZF-R3, SUZUKI GSX250R, YAMAHA YZF-R25, KAWASAKI Ninja250SL, HONDA CBR650F, KAWASAKI Ninja250, HONDA CBR250R, HONDA CBR400R, HONDA CBR150R, HONDA CBR500R, YAMAHA YZF-R3
Mirror hall.
If you use Mirror's hole or an empty Screw hole, it's not usually noticeable.
The Spanner groove is also left uncut and round, so you may need to be a little creative to install it.
And the build is rough.
View detail
Simple and robust
Simple and good.
Durability is also not a problem.
But the construction is rough because it is Made in USA.
Easily removable spec. and expandable with a variety of parts.
The mounting pattern is infinite.
View detail
There is no Spring
The standard Arm contains Spring, and Arm and Holder are
It's a spec. that doesn't drop out, but it's not in the Short.
The function is the same as the standard one, but it looks a little better because it is shorter.
View detail
Smartphone Holder for Scooter
I'm buying RoseRose, so Quantity:It is an impression in Set.
At family reQuest, I decided to install a Smartphone Holder on VESPA Prima Vela 150.
I bought a Base, a Short arm (I thought it would be a hindrance if it was a long arm on the Mirror mount) and a Smartphone Holder from RoseRose.:There was no Set sale.
RAM-HOL-UN7BU with tether for XGrip Smartphone
・RAM-B-201U-A Short arm
・RAM-B-252U MirrorFrame base 11mmBoltfor Hole
Fast, I ordered at midnight, but it was in stock and I got it the next day.
Now for the installation:。。。。
Oh, Mirror's slot is retracted, and friend tightening is not possible. ・・・・Mirror Bracket diameter was only checked on the Net, and it was a mistake to buy it on a hunch.
Then, I change my mind and decide to buy Base to be attached to Mirror Bracket. On the spot, I bought Petit. This time, for the sake of caution, I measured Mirror Bracket diameter with Caliper and chose Base which can be attached to Beauty eye.
RAM-B-408-37-62U Bar Mount base bar
I knew it was in stock and it arrived the next day. It's a good thing that it's the holidays.
Now, since four kinds of Spacers are included according to the diameter, I chose the Spacer which fits the most after wrapping the included Rubber. This Base has a Hexagonal Wrench in it, so you don't need to do anything. (I think that I usually have it, so I don't need it. (I don't need it because I think I usually have it.
Tighten the screw and put it in a good place where Arm can be attached, and Base is over.
It's very sturdy, even though it looks unreliable at first glance. If the rubber of the part to tighten the phone deteriorates, it may become slippery, but since it is new, it does not slip at all.
By the way. "Bar Mount base bar. There was a Parts Structure diagram and a brief explanation, but nothing else. The Holder had a Rubber on it and I thought it must be used like this. The Mount base bar had a Rubber on it so that the One Side could be glued on. I was sure that I would have to wrap it first so that it would not move. It's easy to install, but I'm imagining it. I'm sure it's right.
Well, let's install USB power supply next.
View detail
Smartphone Holder for Scooter
I'm buying RoseRose, so Quantity:It is an impression in Set.
At family reQuest, I decided to install a Smartphone Holder on VESPA Prima Vela 150.
I bought a Base, a Short arm (I thought it would be a hindrance if it was a long arm on the Mirror mount) and a SmartphoneHolder from RoseRose.:There was no Set sale.
RAM-HOL-UN7BU with tether for XGrip Smartphone
・RAM-B-201U-A Short arm
・RAM-B-252U MirrorFrame base 11mmBoltfor Hole
Fast, I ordered at midnight, but it was in stock and I got it the next day.
Now for the installation:。。。。
Oh, Mirror's slot is retracted, and friend tightening is not possible. ・・・・Mirror Bracket diameter was only checked on the Net, and it was a mistake to buy it on a hunch.
Then, I change my mind and decide to buy Base to be attached to Mirror Bracket. On the spot, I bought Petit. This time, for the sake of caution, I measured Mirror Bracket diameter with Caliper and chose Base which can be attached to Beauty eye.
RAM-B-408-37-62U Bar Mount base bar
I knew it was in stock and it arrived the next day. It's a good thing that it's the holidays.
Now, since four kinds of Spacers are included according to the diameter, I chose the Spacer which fits the most after wrapping the included Rubber. This Base has a Hexagonal Wrench in it, so you don't need to do anything. (I think that I usually have it, so I don't need it. (I don't need it because I think I usually have it.
Tighten the screw and put it in a good place where Arm can be attached, and Base is over.
It's very sturdy, even though it looks unreliable at first glance. If the rubber of the part to tighten the phone deteriorates, it may become slippery, but since it is new, it does not slip at all.
By the way. "Bar Mount base bar. There was a Parts Structure diagram and a brief explanation, but nothing else. The Holder had a Rubber on it and I thought it must be used like this. The Mount base bar had a Rubber on it so that the One Side could be glued on. I was sure that I would have to wrap it first so that it would not move. It's easy to install, but I'm imagining it. I'm sure it's right.
Well, let's install USB power supply next.
View detail
As Repair Parts and as Decoration
[How is it used?
About 10,000km for 1 year with YZF-R25, about 60,000km for 4 years with YZF-R6.
Even on the highway in the rain and wind, or on the circuit using high rpm, the rubber does not come off.
Including the initial Black Rubber.
Highways with strong winds include the Hon Qing Poverty.
Was the one you received as per Image?
As Image because of Large body Blue although I feel that the color tone is different from the image.
Was the installation difficult?
It is a tool hibiscus and very easy.
All you have to do is pull out the original one, drop some glue on it and insert it.
How was your experience with it?
The XPERIA5 can be mounted safely even in situations where it is subjected to strong winds such as highways. It is easy to mount and easy to remove, and it did not spoil the function that can be mounted with ease.
[Included Parts:were they on?
Glue. And it comes with a sheet of paper that I haven't opened yet, Instruction Manual?
[Was there anything that disappointed you?
nothing special
Point and hang of installation
It should be inserted before it drips.
View detail
Fits: YAMAHA NMAX, YAMAHA MT-07, SUZUKI GS125, KAWASAKI VulcanS, HONDA Rebel300, YAMAHA NMAX155, SUZUKI BURGMAN200, HONDA REBEL250, HONDA SUPER CUBC125
Smartphone Holder for Scooter
I'm buying RoseRose, so Quantity:It is an impression in Set.
At family reQuest, I decided to install a Smartphone Holder on VESPA Prima Vela 150.
I bought a Base, a Short arm (I thought it would be a hindrance if it was a long arm on the Mirror mount) and a Smartphone Holder from RoseRose.:There was no Set sale.
RAM-HOL-UN7BU with tether for XGrip Smartphone
・RAM-B-201U-A Short arm
・RAM-B-252U MirrorFrame base 11mmBoltfor Hole
Fast, I ordered at midnight, but it was in stock and I got it the next day.
Now for the installation:。。。。
Oh, Mirror's slot is retracted, and friend tightening is not possible. ・・・・Mirror Bracket diameter was only checked on the Net, and it was a mistake to buy it on a hunch.
Then, I change my mind and decide to buy Base to be attached to Mirror Bracket. On the spot, I bought Petit. This time, for the sake of caution, I measured Mirror Bracket diameter with Caliper and chose Base which can be attached to Beauty eye.
RAM-B-408-37-62U Bar Mount base bar
I knew it was in stock and it arrived the next day. It's a good thing that it's the holidays.
Now, since four kinds of Spacers are included according to the diameter, I chose the Spacer which fits the most after wrapping the included Rubber. This Base has a Hexagonal Wrench in it, so you don't need to do anything. (I think that I usually have it, so I don't need it. (I don't need it because I think I usually have it.
Tighten the screw and put it in a good place where Arm can be attached, and Base is over.
It's very sturdy, even though it looks unreliable at first glance. If the rubber of the part to tighten the phone deteriorates, it may become slippery, but since it is new, it does not slip at all.
By the way. "Bar Mount base bar. There was a Parts Structure diagram and a brief explanation, but nothing else. The Holder had a Rubber on it and I thought it must be used like this. The Mount base bar had a Rubber on it so that the One Side could be glued on. I was sure that I would have to wrap it first so that it would not move. It's easy to install, but I'm imagining it. I'm sure it's right.
Well, let's install USB power supply next.
View detail
Smartphone Holder for Scooter
I'm buying RoseRose, so Quantity:It is an impression in Set.
At family reQuest, I decided to install a Smartphone Holder on VESPA Prima Vela 150.
I bought a Base, a Short arm (I thought it would be a hindrance if it was a long arm on the Mirror mount) and a SmartphoneHolder from RoseRose.:There was no Set sale.
RAM-HOL-UN7BU with tether for XGrip Smartphone
・RAM-B-201U-A Short arm
・RAM-B-252U MirrorFrame base 11mmBoltfor Hole
Fast, I ordered at midnight, but it was in stock and I got it the next day.
Now for the installation:。。。。
Oh, Mirror's slot is retracted, and friend tightening is not possible. ・・・・Mirror Bracket diameter was only checked on the Net, and it was a mistake to buy it on a hunch.
Then, I change my mind and decide to buy Base to be attached to Mirror Bracket. On the spot, I bought Petit. This time, for the sake of caution, I measured Mirror Bracket diameter with Caliper and chose Base which can be attached to Beauty eye.
RAM-B-408-37-62U Bar Mount base bar
I knew it was in stock and it arrived the next day. It's a good thing that it's the holidays.
Now, since four kinds of Spacers are included according to the diameter, I chose the Spacer which fits the most after wrapping the included Rubber. This Base has a Hexagonal Wrench in it, so you don't need to do anything. (I think that I usually have it, so I don't need it. (I don't need it because I think I usually have it.
Tighten the screw and put it in a good place where Arm can be attached, and Base is over.
It's very sturdy, even though it looks unreliable at first glance. If the rubber of the part to tighten the phone deteriorates, it may become slippery, but since it is new, it does not slip at all.
By the way. "Bar Mount base bar. There was a Parts Structure diagram and a brief explanation, but nothing else. The Holder had a Rubber on it and I thought it must be used like this. The Mount base bar had a Rubber on it so that the One Side could be glued on. I was sure that I would have to wrap it first so that it would not move. It's easy to install, but I'm imagining it. I'm sure it's right.
Well, let's install USB power supply next.
View detail
Falling while driving
It's easy to install, but one month after I put it on, the screw came off while driving and the Smartphone Holder fell off.
I didn't tighten it because I thought it would still be Large strong.
The Smartphone Holder and Ram Mount were broken by a car stepping on them, and I am very scared to think that I would be wearing my phone.
This product can be used on BrakeReserve tank, but it is your own responsibility. Of course, you need to tighten the screw and use the screw lock agent.
I decided that I would never put myself in this place again.
The model is C650GT.
View detail
Sturdy phone holder
My motorcycle is HONDA CM500. I bought this RAM MOUNT mobile phone holder on webike. The bracket material is made of military grade material. It is easy to install, very firm, without abnormal noise, and the workmanship is not as rough as expected. The 12pro max shell is thin. Just installed, I received it within five days of shipment -------------------------------------- -------- My motorbike is a HONDA CM500 and I purchased this RAM MOUNT on webike. It is made of military grade material, easy to install and very solid too, no rattles. The quality is also not as rough as I thought it would be. It fits my 12pro max just right. Shipping was fast and I received it in 5 days Powered by Google Translator View detail
RAM MOUNT Security Knob for 1.5-inch Ball Arm
Because it is equipped with a RAM mobile navigation bracket, I am usually too lazy to disassemble it for fear of trouble, but it is convenient if others want to take it away. If it is lost, it will be hundreds of dollars, so it is equipped with this special anti-theft lock. The material is also good, the price is not expensive, and the screw is very tight, even if the speed is more than 150, it will not loosen, it is very tight and stable. You can also hang it on the keychain if you don’t use it. If you buy a RAM phone holder, it is recommended to equip it with an anti-theft lock. ---------------------------------------------- Because with a RAM cell phone navigation stent, usually basically do not bother to trouble removal, but if someone wanted to take the words are easy to lose, then that is a few hundred pieces did not, on the allocation of the special anti-theft locks. Look at material material is also good, prices are not expensive, and tighten very tight, even if the speed of more than 150 will not loose, very tight very stable. When not in use, then you can hang the keychain above, if you buy a cell phone holder RAM recommended anti-theft lock with a very convenient. Powered by Google Translator View detail
The best phone holder
RAM is a very good phone holder. I have considered other brands before, but friends who play motorcycles around me have repeatedly recommended this brand to me. Although the price is very expensive, but bite the teeth or buy it. It's very good, it's very easy to use, and it's very firm. It is worthy of being a military-grade material. Various accessories can be suitable for all kinds of handlebars. The rubber pad is also thoughtfully presented so that it will not scratch the handlebar when installed. ---------------------------------------------- RAM is a very good phone holder. I considered other brands before, but my friends who play motorcycles around me recommended this brand over and over again. It was expensive but I bought it anyway. Very good, very light to use, and the grip is very firm. Worthy of the military-grade material, a variety of accessories can be suitable for a variety of handlebars, but also thoughtful gift of rubber pads will not scratch the handlebars when installed. Translated with www.DeepL.com/Translator (free version) Powered by Google Translator View detail
Short arm has no Spring.
The standard Arm is long and cheap to use, but it stands out so I used it for the shortest Arm length I could find.
When you use it, if you loosen the screw too much, it will fall down because there is no spring unlike standard Arm.
I fell to the ground after falling to Tank once.
View detail
RAM MOUNT mobile phone holder
The RAM mobile phone holder is easy to install, and it takes ten minutes to get it done by yourself. It is very firm and easy to disassemble. After installation, it is much more convenient to take the mobile phone to watch the navigation, and you will not go the wrong way, and the phone will not be missed. I used to listen to the voice navigation of the headset, but sometimes I still go wrong. Now it is more convenient to listen and watch. There is no one necessary for riding. ---------------------------------------------- The RAM mobile phone holder is easy to install. It takes ten minutes to get it done by yourself. I tried the effect during riding. It is very firm and easy to disassemble. After installation, it is much more convenient to take the mobile phone to watch the navigation , and you will not go the wrong way, and the phone will not be missed. I used to listen to the voice navigation of the headset, but sometimes I still go wrong. Now it is more convenient to listen and watch. There is no one necessary for riding. Powered by Google Translator View detail
Recommendations for smartphones without Autofocus
It's very chunky.
In terms of Largeness, I think most smartphones these days are Target.
The design is a bit old and doesn't work on impact, but that's why it reaches Direct to the phone.
Camera with Autofocus will be affected, so OffLineMap of GoogleNavigation is Recommendation for cheap models.
View detail
Fits: DUCATI SCRAMBLER(800), HONDA CB1000R, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB125R, HONDA CB1300F, HONDA CB150R, HONDA CB250R, HONDA CB400SB, HONDA CB400SS, HONDA CB750, HONDA CRF1000L Africa Twin, HONDA CRF250L, HONDA CRF250RALLY, HONDA CTX700, HONDA DN-01, HONDA GB250, HONDA GROM, HONDA GROM
Required Items that can be attached to Refreshing
It can be installed in various places where there is Bolt.
I replaced it with a longer Stainless bolt and mounted it on the Stem.
Refreshing installation compared to U-shaped mount.
View detail
Fits: DUCATI SCRAMBLER(800), HONDA CB1000R, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB125R, HONDA CB1300F, HONDA CB150R, HONDA CB250R, HONDA CB400SB, HONDA CB400SS, HONDA CB750, HONDA CRF1000L Africa Twin, HONDA CRF250L, HONDA CRF250RALLY, HONDA CTX700, HONDA DN-01, HONDA GB250, HONDA GROM, HONDA GROM
Sub-optimally mounted.
I already installed one of them by processing CrownNut as shown below.
URL → https://imp.webike.net/article/477619/
I attached this to the Separate HandlebarsFixing Screw M8 part of the FZr for fun (mystery).
Processing is as shown in the image.
It will fit in the Upper Cowl Bracket without interfering.
I'm going to use an old digital camera here as a drum recorder.
The video seems to have taken a running scene.
View detail
I want to mount the Camera safely at the right height.
Reason for purchase
I wanted to install the camera in the narrow space between the Meter panel and the Top Bridge, so I had to use a long arm like this product to extend the distance between the fixed bolt on the body and the camera.
I was looking for a robust mount that is strong enough to withstand the vibration and shock of the car body by attaching the ActionCam compatible mount on the Camera side of the Drraco and the M8 Bolt on the car body side with Ram Mount parts.
Installation
I used Ram Mount's M8Bolt Base on the body side and extended the ball of Ram Mount Go-ProMountAdapter connected with ActionCam compatible mount on the camera side with this product. It was fixed firmly to the extent that it did not move even if Camera was pushed strongly with the finger only by twisting the Handlebar of the tip of the Bolt by the hand.
Good points
Ram Mount's Arm is sold in three different sizes, so I was able to choose the right height Arm for the application where I wanted to stand the Camera from the back of the room like this. The point that it was possible to fix it firmly only with a finger without using a tool is also high evaluation.
What I liked about it
I bought this product based on the picture on the web without seeing the actual product because there is no Ram Mount store near me.:The arm part is made of plastic and painted black on gold (probably iron). Because it is hidden in a secluded place, it doesn't bother me especially because it is a place that doesn't usually catch my eye, but it may be an unforgivable point for some people.
Summary
The point that it can be chosen from three kinds according to the length that it wants to extend is also convenient. If you prepare the ball of Ram Mount at the tip of the object, you can install it easily by twisting it with only your finger, and you don't need tools. It is cheap if it is this price compared with the material and the processing when it is processed and installed by oneself. However, the purpose of this product is to fix the object, so it will not be a problem for those who do not care about the details and use it after processing or modification.
View detail
I want to fix my camera securely with ActionCamMount.
Reason for purchase
The ActionCamMount Compatible Adapter for EDR (EDR-P06) is sold separately as an option part from MITSUBA. I thought it would be possible to fix it to the car body.
Installation
The above EDR ActionCamMount Compatible Adapter (EDR-P06) from Mitsuba is compatible with ActionCam of Go-Pro etc. The concave part of EDR ActionCamMount Compatible Adapter (EDR-P06) and the convex part of Ram Mount (EDR-P06) and the convex part of the standard Arm (RAM-B-201U) and fix it with the attached Bolt.
Good points
The compatible products of the Go-ProMount are widely available, and since the Dr-Recorder of MITSUBA which was introduced this time was able to obtain the one of the same shape as the OptionMount, the point that it was possible to install in the car body without processing by combining with this product. The price of this product is cheap enough when compared to the cost of materials at Home Center.
What I liked about it
The gap of the convex side of the Ram Mount standard Arm (RAM-B-201U) seems to be made a little narrow, and it was not possible to mesh it well without carefully prying with the slotted screwdriver so as not to damage it. Once installed, the narrow gap of this convex part connects the Mount to each other firmly, so it can be thought to be a countermeasure for shock and vibration when driving a motorcycle. However, it was difficult for me to work alone because I had to widen the two gaps with a slotted screwdriver.
Summary
If ActionCam compatible Adapter is prepared for the Drrorecorder, ActionCam and Smartphone Holder etc. which I installed this time, this Ram Mount standard Arm (RAM-B-201U) can be fixed firmly without processing. If you can get the finished product which can be fixed firmly at this price, the cost is good compared with preparing Gold type or Bolt by yourself and processing and installing. This is a good product. This is a common problem with some motorcycle products, but I personally have not found it to be a major problem as I have always installed the product with small modifications and modifications while checking the condition of the product.
View detail