Reviews
It's got hair in it, and the claws are straight Type.
There was a hair in the inner bag. It's not food or anything, so I don't mind, but it's a little weird.
The claws of the crimping part (Large type) were straight.
I was expecting Emon to have claws that were rounded inward and easy to crimp. I would have preferred to buy a Rose at the local hardware store.
It's free at the Point, though.
View detail
I appreciate the low price, high quality, and the fact that I can buy from 1pc.!
[How is it used?
I purchased the Bullet Type Terminal when I needed to replace the Blinker on my old car, Yong FourType.
Was the one you received as per Image?
It was more solid than Image. It is totally different from the one from a hundred-odd different places.
Was the installation difficult?
With Electric Works Pliers, crimping is easy.
How was your experience with it?
So far, the contact is energized and usable without any defects at all.
[Included Parts:were they on?
Nothing.
[Was there anything that disappointed you?
Not particularly
I'm glad I bought it because it's the perfect size. I think it's good to buy it as an adjustment when you are almost to the Gold amount for free shipping.
View detail
Fits: KAWASAKI Universal, KAWASAKI Universal
Quantity:1 Set for 1 Vehicle
Used on W650, sticks in Female side OEM with no problem. Even if it fails, it can still be used with Quantity:2pc. It is safe to say that there is a surplus of Set w View detail
One of these will do the trick!
Used to make Bullet Type Terminal when installing Grip heater on REBEL250.
Was the one you received as per Image?
We chose this product because there are parts for various terminals other than Bullet Type Terminal, and there is no need to purchase additional parts.
As for the pliers, I think they are adequate compared to the more expensive ones, but I think this is fine for first-time users or one-time trial users.
How was your experience with it?
There is a video QR code on the Package for installation instructions, so we worked while watching the video.
I felt that it was the first time or that shimmying was moderately difficult.
[Points to note]
Watch the video a couple of times and do it when you have time.
How did it compare to other products?
Many pliers alone cost about the same price, so I think it is a good deal to have the terminal parts included at a low price.
View detail
High quality for the price
This high quality can't be beat for the price! Switch on and off with ease.
Recommendation!
View detail
I purchased and used it with Male out of necessity.
To be honest, I am at a loss to explain or comment on these parts, but they are working normally.
I am posting this because I think there are quite a few people who Review.
View detail
I needed it so I bought it with Female
If only it were cheaper …! I thought it would be cheaper, but I needed it fast, so I bought it.
Good quality!
View detail
Very ordinary Hira terminal
It is a very ordinary Flat Terminal.
I think it is rather expensive in terms of unit price.
However, if unit price is the priority, there will be too much left over and it will be hard to place Quantity.:If you search for a small quantity, you will find only products with "1 Set of 100pcs." and if you search for a small quantity, you will find only products with "Quantity:1 Set of 3pcs. etc., which is too small.
In this regard, this product is available in packs of 30 pieces, allowing you to choose just the right amount of salt.
Later, it is also a high Point that it is in a Plus Chick Case.
View detail
Just the right product at the right price.
[How is it used?
Used to adjust the length of Blinker's Wiringetc. for Bullet Terminal crimpingetc.
Was the one you received as per Image?
It was just as Image.
The product itself is a little large. I have the impression that it is difficult to use unless you have large hands.
How was your experience with it?
After actually using it, first of all, I feel that the movement is a little bad. I wonder if the problem is that it is brand new, but the opening of the pliers is a bit stiff. This may improve as I use it more.
What was very good about this product was that the Bullet Terminal and terminals were used from the beginning to make a number ofQuantity:Set or attached.
I'm glad I changed to Large because I can buy one of these and get to work right away.
How did it compare to other products?
I used to use a high-end tool from Manufacturer at work, but it was a world of difference compared to that.
However, I think this product is sufficient for Sunday mechanicLevel.
View detail
Good product!
Good product!! I recommend this products for beginners motorcycle mechanic and try to DIY, install motorcycle dash cam and USB cellular phone charger! View detail
useful
Easier and faster than soldering. This is sufficient for non-critical areas. View detail
for the occasion
[How is it used?
I bought this when I was organizing my commuter CUB Wiring, which has been a mess since I bought it, for Earth.
Was the one you received as per Image?
As per Image, AutoBacks and Color:I could have gone to YellowHat to buy them, but it was a hassle, so I bought them at Webig while buying other parts. It is very helpful to be able to buy something on the side.
Was the installation difficult?
Crimping with Electric Works Pliers is OK. As a side note, Electric Works Pliers are KNIPEX's recommendation for extra-thick pliers. Cheaper types have a thinner body and cannot be crimped properly.
Wiring relationships work best if you buy Electric Works Pliers that are as tough and thick as possible.
Rob Star (Shrimp) I remember that the good ones of the "Mere Old Man" were also so-so and thick.
How was your experience with it?
Neither good nor bad
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Electric Works Pliers can last a lifetime if you buy the right ones, so go ahead and splurge!
View detail
To add USB power supply
[How is it used?
Used to branch Attachment power to add USBCharger to Motorcycle.
I chose this Splice Terminal because I did not want to change the OEM Coupleretc. as much as possible.
Was the one you received as per Image?
It arrived in a 10-pack as shown in the picture.
No one was crushed or anything, no problems.
How was your experience with it?
Only the OEMHarness coating was peeled off and crimped to the cord for the USB power supply.
The process itself is very easy and not bulky like Bullet Type Terminal.
But I can't put Heat Shrink Tube in the middle of OEMWiring if I use it in the middle of OEMWiring. (You can do this by removing Wiring once from Coupler, though.) Therefore, it was treated with insulated Tape.
[Points to note]
Since the sheathed part is not crimped, it is Large thing to crimp only the core wire firmly.
【Review】
We are happy to be able to put together Refreshing Wiring at a very low cost.
Some people solder wires together, but I think it is easier to work with Splice Terminals because Motorcycle harnesses are hard to work with.
Bullet Type Terminal is also recommended if there is a possibility of adding Wiring later.
View detail
Now you won't have to buy more.
[How is it used?
I had been modifying and repairing Wiring myself and buying more often, but I decided to buy this product in Large capacity anyway.
For some reason, only the Female side disappears quickly...
Was the one you received as per Image?
It is as shown in the picture. It cannot be sealed, so you need to prepare some other container or something.
I keep mine in a Zip lock for now.
How was your experience with it?
It is a very ordinary Bullet Type Terminal.
However, I feel that Emon's Bullet Terminal Female is basically made tight.
I try to use Pliers to spread out my feelings before using them.
[Points to note]
You must prepare the container in advance! If you don't have one, it will be RoseRose, so please be careful.
There is no waterproof cover, so those who need one must purchase one separately.
【Review】
I'm glad to see that there are 100 pieces in the package at this price.
I have not been able to find it at Home center before, so I am glad I was able to purchase it at Webike this time.
View detail
Wiring Connection
Wiring distribution for Bullet Type Terminal, Double Type is required to make the connection and is purchased.
It contains 10 pieces, comes with a Cover, and is a cosmetically pleasing product.
It looks like it is MADE IN CHINA …
Now, the Wiring connection can be made at last.
View detail
It won't break.
I used it to attach an additional Switch and it is sturdy without any extra features.
Wiring is simple and easy to handle since the circuit only has a switch function to switch electrical components on and off.
View detail
Beware of Size Mistakes
[How is it used?
When replacing the blinker of XJR400R, I had to cut off the Bullet Terminal of the blinker to pass the wiring through the blinker bracket, so I needed a new Bullet Terminal.
How was your experience with it?
The Bullet Terminal could not actually be used because it was not the same size as the original Bullet Terminal.
How did it compare to other products?
The Size I wanted to buy was available at Home center for the same price, so this product is not a special bargain.
[Points to note]
The number of pieces was not listed here, but the Quantity:1 Set of 10pcs.
Items to buy together:Electric Works Pliers
View detail
Highly reliable
I used to buy it in small quantities, but I bought it in bulk because I use it often.
Crimp cleanly and good quality.
View detail
Easy to use
I used to buy it in small quantities, but I bought it in bulk because I use it often.
Crimp cleanly and good quality.
View detail
Easy to use
I used to buy it in small quantities, but I bought it in bulk because I use it often.
Crimp cleanly and good quality.
View detail