Reviews
Fits: SUZUKI GSXR1000
Grip.
I used it on my GSX-R1000 K1, and it grips just by touching the EasyGrip with my knee without consciously gripping my knee. However, the price is too high. Therefore, my overall satisfaction is 4 stars. View detail
![Knee grip support TANK GRIP PERFOMANCE Black/[Color] Clear](https://global.webike-cdn.net/photo/impression/67/67870b16cb2dcd50738b9a96d57cf759L.jpg)
Fits: SUZUKI GSX-R125, SUZUKI GSX-S125
It will not work if you are around 170 tall.
I am 170cm tall. Leg length is normal or slightly short.
I bought this as a Knee Grip Pad, but in terms of where to put it on, it is correct to call it a Tank Pad.
Because of the length of the legs, gsxr125's knees hit the Side cover, not the Tank. So this product did not work for me.
Perhaps a 180cm tall person, with long legs, could use it.
View detail
![Tank Pad Tank Grips [Evolution]](https://img.webike-cdn.net/catalogue/images/38018/Kawasaki-Z650-2017-Clear-Evo_TS.jpg)
Fits: KAWASAKI Z650, KAWASAKI NINJA 650
unsuccessful
No matter how you slice it, it just doesn't feel right for the Ninja 650 2018. View detail
![Tank Pad Tank Grips [Pro]](https://global.webike-cdn.net/photo/impression/0f/0f2ecf15b8a2a741a57f9a7a82ca2a7cL.jpg)
Large enough
Used on ZX-25R side cowl.
It's hard to tell from the product description, but 30×15 Seat is Quantity:1 Set of 2pc. on 25R side cowl.:1 pc. was sufficient.
If you cut with scissors, the cross section will be wobbly and ugly, but if you use a flat-blade nipper and cut the cross section at about 45°, it will be reflexing.
If you do not have a power supply, you can use a plastic bag filled with hot water to warm up the surface.
However, in the case of Tank, it is difficult without Garage because the heat is transferred to the Gasoline inside.
View detail
![Knee Grip Perfomance [Black/Clear]](https://global.webike-cdn.net/photo/impression/a5/a5bce64620185d14b660651e85dc8ee5L.jpg)
Grip power is not that different...
I put it on my Tank, but it is too high for my knee grip, so I haven't felt the effect. It is easy to install and looks good. View detail
![Tank Pads Tank Grips [Pro]](https://img.webike-cdn.net/catalogue/images/67249/Triumph-Street-Triple-675-2013-2016-Black-Pro1_TS.jpg)
Fits: TRIUMPH DAYTONA 675 , TRIUMPH STREET TRIPLE
Easier on Wear than STOMPGRIP
It is less aggressive on Wear than STOMPGRIP, and Grip is as good as it needs to be. View detail
![Tank Pad Tank Grips [Silicone]](https://img.webike-cdn.net/catalogue/images/38291/Universal-Sheets-300x150mm-Silicone_TS.jpg)
I'd say it's a decent grip.
On the FAZER, I put it on the cover of the frame where the knee touches rather than the tank. I did a little bit of tweaking by myself, so it turned out a little awkward, but it doesn't bother me. It's difficult to make it look good, but I think it's better to use a cut product for each model.:It's a gray color, so it doesn't stand out. The grip is not so good. View detail
![Tank Pad Tank Grips [Silicone]](https://global.webike-cdn.net/photo/impression/41/41caf345023b150d1e430c0d585d67c8L.jpg)
It's good. ♪
The knee grip is now more effective and I don't hit the tank when decelerating quickly. View detail
![Tank Pad Tank Grips [Pro]](https://global.webike-cdn.net/photo/impression/df/dfbfc872af14c46a0238358a6e23d379L.jpg)
Fits: DUCATI MONSTER821, DUCATI MONSTER1200, DUCATI MONSTER1200S
It's pretty good.
Purchased to prevent slippage when using knee grip.
I can feel the effects there.
I'm happy with how tight it looks.
Don't forget to degrease it when you apply it!
View detail
Two months after installation Strong adhesion, hard to peel off
I used to feel a little pain from stone gripping warts, so this Sir Kit type Small Convexity grips firmly, yet does not hurt at all.
The adhesive is strong enough to hurt your fingers during installation. (Lol)
Clear type, a few air bubbles are visible, but they are almost invisible to the naked eye.
View detail
On the SIDE of the CBR650R
[Purchased Kit Lack
If you're a CBR650R rider, you'll know that there are a lot of Tank Pads out there for the 650R, but when you do a knee grip, your inner thighs hit the Cowl underneath the Tank, not the Tank, so the commercial Tank Pads are not practical. I bought this to put on the part of my thigh that hits the knee when I actually grip it.
I really wish they'd release a dedicated one, but for some reason they haven't …
Impressions of use
I made a paper pattern of the area I wanted, then drew a rough sketch along the pattern, then scissors and cutters along the sketch.
It's a great product for when you don't have a dedicated pad, or when you need a little something here and there for your Plus.
I've run with them a few times now and they've made my knee grip much easier.
I've only had it for about two months, but I haven't seen any of the damage or breakage common to cheap products, like tape coming off or rubber tearing!
【Review】
There is a little bit of work involved in processing it yourself, but I thought it was the number one practicality because you can process the original shape and the necessary parts to suit your needs.
The price is a little cheaper than buying a commercial Pad, so I think the cost is the strongest!
If you're riding a CBR650R and want a Pad, I'd recommend it like crazy! It's really useful lol!
View detail
The size is perfect for the car model.
I like the fact that the size is specific to the car model and can be installed without additional work.
The meter panel has a curved surface, so the commercially available Kuala Lumpur Rear Sets may float or wrinkle, but this product adheres to the surface, so the finish is beautiful and the meter is easy to read.
Because it is an overseas product, the instruction manual is not easy to understand, and installation requires a little time and skill.
The meter panel of the latest motorcycles is made of polycarbonate, which is susceptible to scratches and UV rays, so it is better to install the panel when it is almost new, because it is useless if the surface of the meter is scratched.
The Seat prevents scratches, so you can wipe it with a dustcloth without worrying about it.
View detail
![Tank Pad Tank Grips [Evolution]](https://global.webike-cdn.net/photo/impression/d6/d6aab669d25ee6f40c3c1a2f8e7aa5d9L.jpg)
Difficult to process, but the grip is perfect.
This is Type, which you cut and paste by yourself.
As for processing.
It's difficult, so you might want to practice a few times with the parts you don't need. (I should have). 。
I used the Cutter and Scissors together, but the circle is thicker than the other two.
It is difficult to cut straight because of the repetition of areas where the blade can easily enter and areas where it cannot.
I would like to have some kind of cutting machine to position and cut them all at once.
Also, keep replacing Cutter blades with new ones.
As for pasting.
Of course, it's a matter of friction and unevenness.
It's hard to rub it with your fingers after applying it to make it stick. (Eliminate air bubbles) It's hard to do.
If you make a small mistake while applying it, you can reapply it, so apply it loosely.
It is a good idea to keep them close together in a certain place.
It may be similar to Decal paste.
In conclusion, Black is good.
There is no problem at all with peeling. It will be quite large and strange when you peel it off.
As for the texture.
I think it's just like the image. It's not particularly good or bad. It's good enough.
However, I made the mistake of buying the transparent Seat. It should have been Black, which would have made the bubbles invisible.
(I thought that Black would look like White as it deteriorated.)
Transparent Seat is suitable for White and Color:I think it is a light color like Gray.
Knee grip is necessary for correct riding form, and
Since you need to make sure to Form and drive safely even in Touring and city driving.
I would like to see Manufacturer sell a special product for all models that can be called a Sports car with Option.
Lastly, the seat size is listed on the Page of the product description.
In fact, it comes with two Seats of that size.
I bought it because I knew about it in advance from my personal Net information.
If I hadn't known about it, I wouldn't have bought it.
I think it would be better to put this information on the website.
Evaluation items "Use Situation." is between Touring and Circuit for convenience. It is valid for everyone.
View detail
![Knee grip support TANK GRIP PERFOMANCE Black/[Color] Clear](https://global.webike-cdn.net/photo/impression/3e/3ee7c7dac971da16d1fa493ab2a4ef3dL.jpg)
Fits: SUZUKI KATANA
Large satisfied!
I was looking for a pad for the New Model KATANA, but the OEM Product was not enough, and the Universal Product had a complicated tank and side cowl, and it took a long time to cut it. I found EasyGrip and bought it immediately.
I prefer the Large size for warts. EVO (Standard) The accuracy of the grip is very high, and the adhesive strength of the tape is such that if you degrease it properly with alcohol before applying, it will definitely not come off.
The color matches the KATANA paint and I am very happy with it.
It's a little pricey, but I think it's worth the effort.
However, I am satisfied with Large.
View detail
![Knee grip support TANK GRIP PERFOMANCE Black/[Color] Clear](https://img.webike-cdn.net/catalogue/images/49839/EVO433CL_01_TS.jpg)
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
For those who prefer cost performance to appearance.
I bought it on Sale for 2,990 yen and the cost performance was excellent.
As for the product, the Clear type is as others have said. [Color] Clearness will be slightly reduced.
There's also what looks like wrinkles in places.
However, even in winter, if you carefully apply it during the daytime, there were no air bubbles, and the adhesive strength seems to be quite strong.
Knee grip performance is also quite high.
I want something with good performance, but it's too expensive for a certain something.
If you're willing to put up with the looks, it's a good deal.
[Color] With Clear, the difference in clarity is not noticeable from a few meters away.
View detail
Fits: KAWASAKI NINJA 250SL, KAWASAKI Z250SL
The round warts are a little awkward.
The original color was Red×Black, so it matches without a sense of discomfort.
Just degrease it with the included AlcoholWipe and stick it on, because it's black, and the grip at the time of breaking is a big difference.
It would have been better if there was a diagram to attach it because it was hard to tell if the orientation was correct, and there are no images to search for because it is a Minor model.
As for the texture, I think the texture would be better if the cross section was beveled because it is cut off.
The Pattern was also trimmed off at the corners, so I used Scissors to create an edge.
I'd like to see a Variation of warts like PyramidMatte with square pyramids, because the warts are round warts and personally look uncool.
View detail
Fits: SUZUKI GSXR1000
EasyGripSupport EVO
The feeling is very good, it is easy to ride because the body is stable even if G is applied. However, the shape does not match the design of the GSX-R1000 K1 fuel tank, and it took a lot of time to position it. In addition, it is a minus point where the price is also high. View detail
![Tank Pad Tank Grips [Pro]](https://global.webike-cdn.net/photo/impression/22/2259c999339b47dcb574b7a0dfe4a1f9L.jpg)
Saved me a lot of frustration while driving!
Before I put this product on, the Tank was slipping and I couldn't concentrate because I was too nervous to stabilize my body with Cornering.
Once installed, you can stabilize it with your knees, so you can concentrate on your tire grip and accelerator operation.
I don't like the look of the Standard type because it has large warts, and the Pro type has very fine protrusions, so I prefer the SMART and Parenthesis.
Some people have written that Grip is too good, but I didn't care for it.
WetSeat for degreasing is also included for strong attachment.Quantity:Pair (for Left and Right) The positional relationship between the two is up to the sense of the person who puts it up, but the size feeling is also good as if it were a dedicated product for car models.
View detail
Fits: SUZUKI GSXR1000
EasyGripSupport EVO
It is good without complaint, but I think that it is expensive in terms of Gold. I installed it on my GSX-R1000 K1 and it took me a long time to position it. View detail
Does not fit the GSX-R1000 from 2017
Purchased to install on my GSX-R1000R 2019.
It does indeed say ”GSXR1000 17-21” in the fitment list, but it doesn't fit.
You will receive similar but different shapes of Film.
Although I forced myself to put it on, it did not become a very usable state, and I peeled it off immediately and discarded it.
It is the form which threw away 3000 yen in the ditch.
It is the object of the conformity guarantee, but it has not received the guarantee especially because it gave up on the spot and discarded it.
Well, this is our fault for not applying for it.
First of all, if you are planning to install this product on 2017 or later GSX-R1000, this product will not fit and you should look elsewhere.
View detail