Reviews
Replace from attached terminal
[How is it used?
The terminal attached to GALE SPEED's Clutch holder is Straight Type
It looks ugly as it is (see photo 1), so I was wondering if there is anything better.
I was looking for it and found this!
Was the one you received as per Image?
It was exactly as pictured, nothing different.
Was the installation difficult?
Just pull it out and replace it.
Terminal to terminal connections can be made without problems with crimped pliers and a little bit of skill.
How was your experience with it?
Looks much better (see photo 2).
If you don't care, you won't care.
If you're going to mess with Motorcycle, you want the details to look nice and cool.
The terminals that come with the Parts are perfectly functional, though.
Recomendation because just a little bit of time and effort will improve the appearance of the product.
A terminal is just a terminal, but if a single terminal can change the appearance so much, it is worth replacing it.
[Included Parts:were they on?
None, just terminals and cords.
[Was there anything that disappointed you?
None in particular,
View detail
A friend of old cars?
I'm not sure about current vehicles, but this is a common two-turn Bullet Type Terminal on older vehicles.
I get the impression that there are a lot of them, especially around Tail.
View detail
Although the shape is different from those made by Ekimon, Yaoki, and others.
The Crimp section has not been modified in any way, such as being slightly folded from the beginning, so it is a little troublesome to Crimp with Electric Works Pliers, but it is good for Crimping several thick or thin Cables at once.
In addition, the sleeves for waterproof and insulation are a little thicker than those of the Title companies, but there were no particular problems when they were mixed with those made by those companies.
View detail
For additional Wiring
I found an article that the Bullet Type Terminal for Motorcycle is slightly different in size, and it seems that it is not Exactly fitted to A0 products, so I bought one to try it out.
I do think it's harder to pull off than A0.
Why would they change the Size?
And I didn't know there was a difference even among MotorcycleManufacturers.
It's an essential component for safe Wiring processing.
View detail
By Location!
When wiring, Wiring Tube is used for the wiring itself, and Coil type Wiring Bando is used for the Bullet Type Terminal and the Jack portion. The Wiring type is easier to use than the Tube type for these joints because it is easier to remove immediately. View detail
Wiring Summary!
The Wiring Tube is a good product for refreshing the wiring, because it is hard to tell which is which when you're wiring and it can cause stress buildup. View detail
Fits: HONDA CT125CT110 HUNTER CUB, HONDA MONKEY125, Others Universal
Flashing relay
Since the OEM of the MONKEY125 is an LED unit, the Blinker with LED bulbs would be a high flasher, so I was looking for a Relay and found a pontoon from KITACO, which saved me a large change.
It was under the Tank, so it only took a while to remove the Tank.
View detail
Kiboshi Terminal Set
Quality and Texture Information Typical Jiboshi Terminal Set Full of Male Terminal for usability Product Inquiry Crimper To Buy With, Female Terminal Easy to install Cost performance and comparison sets with other products are affordable WeBike packaging is always great. Arrives in a week for delivery and packaging I ordered it after looking at the word "set" to see if the translation was wrong when I bought it, but only the Male Terminal came and checked the site again, and the notice came up that there were 8 Male Terminals. I need to order again because it's internalism. It goes well with Honda View detail
Fits: HONDA CB1100 F (SC11), HONDA CB1100 R (SC05), HONDA CB1100 R (SC08), HONDA CB750 F (RC04), HONDA CB900 F (SC01), HONDA CB900 F (SC09)
Connector Replacement
The item used was old, dirty, and tight when removed, so it was replaced with a new one. It is very helpful that only the type I want is sold as a single item. View detail
exchange
Since there was discoloration and deterioration of the used products as the terminals were reconnected, the Cover was also replaced with a new one while it was being used.
Since it is a Single Item sale, it is good for purchasing only the quantity you need.
View detail
Cover
When the terminals were re-installed due to wire breakage, the cover was deteriorated and discolored, so it was replaced with a new one together with the new cover.
Single Item sales and reasonable prices are good for those who want to purchase only the number of items they need.
View detail
Fits: HONDA CB1100 F (SC11), HONDA CB1100 R (SC05), HONDA CB1100 R (SC08), HONDA CB750 F (RC04), HONDA CB900 F (SC01), HONDA CB900 F (SC09)
Wiring Connection
I had disconnected the Wiring and used it for branch connection.
Single Item sales are not expensive, so you can buy as many as you need.
View detail
Fits: HONDA CB1100 F (SC11), HONDA CB1100 R (SC05), HONDA CB1100 R (SC08), HONDA CB750 F (RC04), HONDA CB900 F (SC01), HONDA CB900 F (SC09)
Connection
Used to connect Power Supply Cable.
It was helpful to be able to purchase only the 110 Receptacle coupler and Pin in Single Item.
View detail
I used it for storage for my own Wiring blindfold.
Plus and Minus lines from Relay, which I made myself in NINJA.
Grip heater, YOSHIMURAProgress2Meter and USB power supply with Bullet Type Terminal
It is connected, but has been left bare until now.
I left it as it was because I basically don't ride on days when it rains,
I'm concerned about the Red Wiring glancing through the gap between the Cowl and Handlebar, and I'm not sure what to do with it.
I purchased this product to conceal and store the Bullet Terminal part.
6Quantity:The Large size was sufficient to hide the Bullet Type Terminal of Set+Alpha.
View detail
Fits: HONDA CB1100 F (SC11), HONDA CB1100 R (SC05), HONDA CB1100 R (SC08), HONDA CB750 F (RC04), HONDA CB900 F (SC01), HONDA CB900 F (SC09)
Wiring Connection
I am repurchasing for Wiring connection.
Since the terminal and cover are sold as a single item, you can purchase only the number of items you need.
View detail
Fits: HONDA CB1100 F (SC11), HONDA CB1100 R (SC05), HONDA CB1100 R (SC08), HONDA CB750 F (RC04), HONDA CB900 F (SC01), HONDA CB900 F (SC09)
Wiring
This is for spare Wiring connections in case of failure.
It is helpful to be able to purchase only the number of items needed because they can be purchased through Single Item sales.
View detail
Fits: HONDA CB1100 F (SC11), HONDA CB1100 R (SC05), HONDA CB1100 R (SC08), HONDA CB750 F (RC04), HONDA CB900 F (SC01), HONDA CB900 F (SC09)
Wiring terminal
I am buying more here to redo the Wiring terminals.
The terminal is sold as a Single Item with a Cover, so you can buy only the number of items you need.
View detail
Fits: HONDA CB1100 F (SC11), HONDA CB1100 R (SC05), HONDA CB1100 R (SC08), HONDA CB750 F (RC04), HONDA CB900 F (SC01), HONDA CB900 F (SC09)
Repurchase
I am buying more Wiring for redoing.
It is helpful to be able to purchase only the necessary number of items, which is not bad since single items are sold at the terminal and cover.
It would have been nice if they were sold with the same Gold terminal as in the photo shown.
View detail
Fits: HONDA CB1100 F (SC11), HONDA CB1100 R (SC05), HONDA CB1100 R (SC08), HONDA CB750 F (RC04), HONDA CB900 F (SC01), HONDA CB900 F (SC09)
Wiring
It is used to redo ConnectorWiring.
Single ItemConnector, sold by terminal only, so you can buy only the Type you want.
View detail
Fits: HONDA CB1100 F (SC11), HONDA CB1100 R (SC05), HONDA CB1100 R (SC08), HONDA CB750 F (RC04), HONDA CB900 F (SC01), HONDA CB900 F (SC09)
spare
I purchased this as a spare to do a branch of Wiring.
Single items are sold, so it is helpful to be able to purchase only the necessary number of items.
View detail