Reviews
Old Logo
[How is it used?
It was used as the final finish of the Cowl paint job.
The OEMCowl I used as a reference for painting was the one with the HRC Sticker, so I purchased the OEM Product.
Was the one you received as per Image?
As shown in the picture, each Size is a Quantity:It came with a 1pc. mount.
I am glad that the old HRCLogo is still available for purchase, but I would like to see the new Logo as well.
How was your experience with it?
It is good because there are various sizes and you can choose the one you like best by matching it with the actual product.
Personally, I don't need Small Saisai Size so much. "Honda Racing" I thought it would have been nice to have some in.
[Points to note]
Not particularly
How did it compare to other products?
I was not sure whether to go with HRCSticker, which is published by FACTORY EFFEX.
I chose this product because it is a Honda OEM Product and I could choose the size.
【Review】
The quality of the product is assured by the fact that it is a Honda OEM Product.
I thought it was a bit expensive for a sticker. I thought it was a bit expensive for a sticker, but it is good that it is weather resistant considering that it is to be attached to the car body.
View detail
The HONDA party can't get enough of it.
I bought the Black lettering because the Cowl part to paste is White.
It is Stylish because it is a Type Sticker where only the text remains.
The size is large, so it is impressive and I like it.
I don't feel any deterioration etc. even if I keep it stretched for a while.
View detail
Pitta for Helmet.
This is my second purchase, I put it on my Helmet. View detail
Basics.
[How is it used? Attached to Motorcycleetc.
Was the one you received as per Image? Yes.
How was your experience with it? It's nice.
[Points to note] I think it is better to put it on cars equipped with YOSHIMURAExhaust System.
How did it compare to other products? This is the only choice.
Other items that would be helpful
Points and hang of installation/Items to be purchased together/Opinions and requests to the manufacturer Wet the product with a mist sprayer, etc. before applying it, and it will be applied beautifully.
View detail
LapinHE22SOEMShock was painted Silver and then affixed ???.
I don't know how durable the stickers are yet, but I think they will be large and sturdy! I would like to use your service again ??. (????*) ? View detail
repapering
The color had faded to a Pink color, so I had to replace it with a new Sticker. The selling price was not too expensive. View detail
Size feeling
It is also easy to affix with a Seal that can be stuck anywhere! View detail
Fits: Others Engine Displacement Volume 125cc or less (Moped 1st/2nd Class)
Attached Screw
The idea is a great product.
The included Screw and Spacer 8mm may not be able to be installed if the Motorcycle side is thick.
We purchased another product (see photo) for NumberSecurity, and applied a 6M×diameter 18mm×thickness 3mm Spacer, and adjusted the height of this product so that it does not hit the Number Limit.
*Motorcycle is SMART DIOZ4 2004
View detail
Fits: HONDA PCX160, HONDA PCX125, HONDA DIO110, HONDA LEAD125, HONDA ADV160
Frankly, it's subtle.
I purchased this product to dress-up my PCX160 Smart key.
The Instruction Manual states Align the bottom edge of the Seal with the paste location and paste." but I knew from other people's impressions that it did not match HONDA's Logo, so I checked the position first.
As a result, it was found that the top edge would protrude if the Logo was used as a reference, so it was decided to Cut the Logo after pasting it.
If the Size was just right and thick enough, I would have given it 5 stars, but it was a little disappointing.
I would like to see a Manufacturer option with Logo printed on it instead of leaving it to Other Brand Products.
View detail
Parenthesis or because I bought it.
I bought this because I had TSR footpeg in and wanted to put Sticker on it as well.
I like Sticker, which has a somewhat retro feel to it!
View detail
Shape is fine.
Used on a 2023 CRF250L.
The three-part design makes it easy to install by avoiding the difference between the three sections.
Normally I wouldn't be concerned about this, but looking at the recent HRCWorks bodies (AMASeries' WorksCRF), the placement of DID and Renthal's Logo is Quantity.:Pair (for Left and Right) The DID comes on the Axle side of the Rear wheel, but this product is reversed. Earlier Works bodies have the same arrangement as this Sticker.
If you don't mind such details, it is a good idea to protect the Swing Arm.
View detail
Parenthesis good
Parenthesis good
I would buy again.
View detail
Too cool, second one.
I had previously arranged for one and put it on the Right SideShroud,
The material is good and cool, so I arranged for another one and attached it to LeftShroud this time.
However, the last letter K has been turned a bit to the upper side.
(;´д)
View detail
HOW MUSH EFFORT DO YOU GIVE?
HOW MUSH EFFORT DO YOU GIVE?" is Sticker's primary motivation for buying it, but I'm thinking of putting it on my new Motorcycle (⇒ no, I haven't bought it yet).
I have already bought this for the second time, and since it was attached to SEROW, I know how durable it is!
(And unlike in the past, there are now proper pictures on the websites where you should buy them! (^。^) y-. o-. o-. o-.)
View detail
Too cool.
Meatless Sticker.
Durability is unknown as it has just been applied.
It is a DRC product, so I don't expect it to be a problem.
Anyway, Parenthesis is too good.
View detail
Anyone can put it up in three sections!
When ordering,
Swing Arm has a bumpy decoration, but I wonder if it can be applied neatly.
I was worried, but when I received it, I was surprised to see that it was divided into three parts!
Anyone can put this up!
The texture and design are perfect with Front.
View detail
The footwear is tightened.
ExactSize because it is Exclusive Design.
It is thick and has perfect adhesion.
It is easier to install the Left Side by removing the Brake hose clamp.
If you hurry, you can turn around. It is.
It can be done by anyone because it is just a matter of putting it on.
View detail
It was installed perfectly!
Mounted on Swing Arm of CRF250 Rally MD47!
If you are not careful, it will bend, but it is not that difficult.
White areas are dirty and should be cleaned regularly!
View detail
สวยงามและลงตัวติดงานของแท้ View detail
สินค้าสวยงาม คุนภาพดี View detail