Reviews
This is the cause of RearStop-lamp non-lighting.
Motivation
After the Brake pedal was modified on my GPZ, the RearStop-lamp stopped working. The cause was that the Pressure switch was out of wiring. I purchased the Red color in stock.
Was the one you received as per Image?
No problem
Was the installation difficult?
Installation DIY process.
? First, we covered the wiring with a WiringRubber tube because the wiring would run out if the wiring from the Bolt was too thin and bare to be installed in a vehicle.
Bullet Type Terminal Installation
Replacement of banjo bolt that is out of wiring and installation of a new one.
? Caliper air removal as needed
Pedal step and Stop-lampOK
How was your experience with it?
This is the third time I have replaced the pressure switch, and I am relieved when the stop-lamp comes back on.
[Included Parts:were they on?
Supplies for the banjo bolt were included.
[Was there anything that disappointed you?
The price is too high. I don't know if it is not popular, but I bought it because Red color stock was the cheapest. As a result, I am glad that the Red color became One Point.
The wiring is very thin. The coating is also thin, so this is a durability problem and can be easily broken.
View detail
Pressure switch for appearance
Since I had installed Rear Sets, I used to connect OEMSwitch and Brake pedal with Tie Band, but I changed to Pressure switch for appearance.
However, Torque wrench only had SocketType, so after some distress, Wiring was disconnected once.
After installation with Torque wrench at the specified Torque, Wiring was solder-attached.
At that time, the original Wiring was Limit in length, so we replaced it with a Cable that we had on hand and lengthened it.
The soldering points are insulated, and the base of the wiring is covered by a protective cap that was attached to the brake hose purchased at the same time, for durability and waterproofness.
For the wiring connection to the car body side, the supplied Electro Tap was not used, but a Bullet Terminal was processed.
Crash washers were made of copper, so we ended up not using Included Parts:except for SwitchBody.
Some people say that the Pressure switch is slow to turn on, etc., but I don't particularly care.
View detail
Purchased in conjunction with Rear Sets Installation
[How is it used?
Purchased in conjunction with the introduction of Rear Sets.
It seems to have opened inside once, and the stop lamp is no longer lit.
Was the one you received as per Image?
Yes
Was the installation difficult?
Easy
How was your experience with it?
neither good nor bad
[Included Parts:were they on?
[Was there anything that disappointed you?
nothing special
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
I'm hoping for durability & sigma; (^_^;)
It is a spec. change from OEMSwitch to hydraulic pressure by equipping Rear Sets of for Race because I use it for town riding and Circuit Running. But … The disconnection which is thought to be caused by the step work while running, FluidOil leak, and whether the DRC product has half a year or not. The construction of the strength UP near Wiring is countermeasure along with changing the Manufacturer from this time. I want to expect whether the countermeasure comes out as good luck. View detail
In addition to replacing the rear brake hose.
I replaced it when I replaced the rear brake hose.
I did not use the Electre Tap that came with it.
The footpeg area has been Refreshingly improved?
View detail
Performance as expected Expected durability
I bought the Active one with high hopes because the one I was using before was ruined
The performance is exactly what I expected, it lights up at a good intensity when I step on the Brake The texture of the Stainless Steel is perfect Now I just need to look forward to the durability
The disappointment is that the Wiring is short as others have, so I extended it with a solder attachment The other point is that the base of Wiring is unreliable I reinforced it with a gun and Colgate Tube
Also, it's a matter of taste, but since the Wiring color is Red, depending on the color of the car, it may be noticeable that it is Black It was good If I'm being a little picky, I'd say that the Red of Wiring is a Plus and the Black of Wiring is a Plus There are a lot of Minus, and since the Brake switch is MinusControl, it is Black Isn't that enough? LOL!
Anyway, I'm looking forward to the durability So far, the other manufacturers have been failing every two years ( ´;p; ∀;p;) hmmm
View detail
[Webike Monitor] Since it was needed with wearing of the Back step, it purchased. operation is satisfactory at all. It functions firmly. Merit well [ as long as it does not understand unless it sees a situation for a while about
[Webike Monitor] Since it was needed with wearing of the
Back step, it purchased.
operation is satisfactory at all.
It functions firmly.
Merit well [ as long as it does not understand unless it sees a situation for a while about
durability, but a Review of a direction besides
is seen, it is not much worried and there is nothing, and ].
It is a portion of the root of a Cable that worries even a
free.
since it
is not a portion which moves, it is so satisfactory -- the touch
seen although I thought that it was -- how is uncertain.
although wound with insulating tape with the
photograph --
-- it will shift, if it is also bent just for a moment, and the
code is becoming unreserved.
if I think it unavoidable that a root is seldom firmly made on various correspondences through which it manages and passes since it is a
general-purpose article, but you attach to the red portion in the
picture a slot, a stage, etc. which make a protective layer easy to stop --
-- it becomes easy to fix many things and is dramatically helpful.
View detail
[Webike Monitor] Before , although the Type put with a Banjo bolt was used, since it had broken, it purchased. The comment with which it equipped are the impressions that a reaction is also good and texture is also high. Durability is the pleasure aft
[Webike Monitor] Before
, although the Type put with a Banjo bolt was used, since it had broken, it purchased.
The comment with which it equipped are the impressions that a reaction is also good and texture is also high.
Durability is the pleasure after using from now on.
When managing by a dissatisfied point having hard lead wire, if disconnected, there was the uneasiness ..
View detail