Reviews
Fits: YAMAHA R1, YAMAHA R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ-1 (FZS1S), YAMAHA FZ-1 (FZS1SC)
Genuine Yamaha Spring Tension for FZ-1 2004
This was one of those springs that do fail over an amount of time. Due to the weather conditions we have here and the amount of salt on the roads during winter, this does casue a lot of issues with our bikes. The part was not hard to find using Yamaha schematics for this model of bike. I believe they do fit a few other models and are readily available in most places. I decided to get them from Webiek as I already had some other smaller parts I needed to order. Shipped toghether, and all my order was delivered safely in 5 days from shipping. The springs are pretty solid and do have a lot of strength. For such a small spring they are really good. Fitted to the shift shaft in less than 20 minutes. Very pleased with the purchase. View detail
Fits: YAMAHA RZ50, YAMAHA RZ50, YAMAHA RZ50, YAMAHA TZM50R, YAMAHA TZM50R, YAMAHA TZM50R, YAMAHA TZR50R, YAMAHA TZR50R, YAMAHA TZR50R, YAMAHA TZR50R
Carburetor's PilotAir Screw.
[How is it used?
Used for CarburetorO/H on TZr50R.
It will be a Pilot Air Screw.
How was your experience with it?
It can be used without any problem. It is divided into four parts:Air Screw, Spring, Washer, and O-ring.
Before assembling the carburetor, it is necessary to check the carburetor thoroughly to make sure that there are no old washers or O-rings remaining.
The order of assembly is Air Screw→Spring→Washer→O-ring.
How did it compare to other products?
Carburetor parts must be OEM parts. Low quality external parts can cause overflow and bodywork problems.
[Points to note]
The parts are quite small, so be careful not to lose them after taking them out of the bag.
Other items that would be helpful
Opinions and requests to Manufacturer:Please supply parts forever!
View detail
Fits: YAMAHA RZ50, YAMAHA RZ50, YAMAHA RZ50, YAMAHA TZM50R, YAMAHA TZM50R, YAMAHA TZM50R, YAMAHA TZR50R, YAMAHA TZR50R, YAMAHA TZR50R, YAMAHA TZR50R
Carburetor Needle Valve.
[How is it used?
Used for CarburetorO/H on TZr50R.
This is a Float valve to be assembled with the Float. It is a little confusing because the product name is NeedleASSY.
How was your experience with it?
It works fine. The one that came with it originally was not that bad, but I replaced it while parts were still available. The price is too high for the Neck, but that can't be helped.
How did it compare to other products?
Carburetor parts must be OEM parts. Low quality external parts can cause overflow and bodywork problems.
[Points to note]
This product must be assembled directly to Float.
Note that simply incorporating the hole as it is will not work.
Other items that would be helpful
Opinions and requests to Manufacturer:Please supply parts forever!
View detail
Fits: YAMAHA VIRAGO 250, YAMAHA VIRAGO 250, YAMAHA VIRAGO 250, YAMAHA VIRAGO 250, YAMAHA VIRAGO 250, YAMAHA VIRAGO 250, YAMAHA VIRAGO 250, YAMAHA VIRAGO 250, YAMAHA VIRAGO 250, YAMAHA VIRAGO 250, YAMAHA VIRAGO 250, YAMAHA VIRAGO 250, YAMAHA VIRAGO 250, YAMAHA VIRAGO 250, YAMAHA VIRAGO 250, YAMAHA VIRAGO 250, YAMAHA VIRAGO 250, YAMAHA VIRAGO 250, YAMAHA VIRAGO 250, YAMAHA VIRAGO 250
O-ring for main jet
[How is it used?
Used for CarburetorO/H on TZr50R.
O-ring to be attached to the main jet.
How was your experience with it?
No problem, installed with Tweezers due to the small size of the parts.
How did it compare to other products?
Carburetor parts must be OEM parts. Low quality external parts can cause overflow and bodywork problems.
[Points to note]
The parts are quite small, so be careful not to lose them after taking them out of the bag.
Other items that would be helpful
Opinions and requests to Manufacturer:Please supply parts forever.
View detail
Fits: YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE, YAMAHA SUPER TENERE, YAMAHA SUPER TENERE, YAMAHA SUPER TENERE, YAMAHA SUPER TENERE, YAMAHA SUPER TENERE
Genuine Yamaha O-Ring for FZ1 2006
This FZ1 2006 has an issue with the water pump. There was a noticeable leak happening and eventually found the culprit. It was the oil seal inside that failed. I found the correct part number by checking Yamaha schematics for this model and year. Not particularly hard and I got the right one. The price Webike had this oil seal for was really great and better than my local Yamaha dealer could do. With some other parts in my order, all were shipped together using EMS. The order arrived in 5 days from shipping which is usual for EMS, they just get your order delivered. The parts were well packaged and no damage was sustained during transit. The oil seal itself was in a Yamaha packet. It is a well pressed oil seal with no visible debris or extra rubber which would cause problems where it needs to go. It is pretty rigid but had some flex to it which came in handy whilst seating it correctly. Now all done, the water pump works as it shopuld and there are now no leaks at all. The coolant is a healthy temp and all is good. Thank you Webike, very pleased with purchase. View detail
Fits: YAMAHA MORPHOUS, YAMAHA MORPHOUS, YAMAHA MORPHOUS, YAMAHA FZ750N, YAMAHA FZ750S, YAMAHA FZ750S, YAMAHA FZ750U, YAMAHA FZ750U, YAMAHA TDM850, YAMAHA TDM850, YAMAHA TDM850, YAMAHA TDM850, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA R1, YAMAHA R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1
Genuine Yamaha O-Ring for water pump for YZFR1 2003
Genuine Yamaha O-Ring for water pump for YZFR1 2003 This O-Ring also needed replacing for the water pump on the YZFR1. The part was super easy to find witht the help of the tools available on Webike. The price was brilliant and even though it's only an o-ring, would you really want to risk a pathetic aftermarket one which will bring your riding to a halt... no. So, this was also ordered along with a few other parts and the shipping was very good indeed. I used EMS fast service as they do exactly what they say they will, deliver FAST, the end. Arrived with me within a week of ordering all the parts needed. All packaged really well as expected and any space in the box was filled with bubble wrap and air pockets to protect any smaller and more delicate parts from damage. I now it is just an o-ring but this is an important one that you should be careful with. When I opened the packet, the o ring was perfect, no tears rips, loose pieces of rubber or anything. Yamaha really do know how to make o-rings. It was a nice smooth surface and was flexible but not too much as this could also cause issues. Yes, I have made the mistake of buying cheap alternatives before to my detrement, just ended in disaster and had to get an OEM one anway, just do not waste your money on the cheap crap. Stick to getnuine for these things. Fitted easily and I hope the rest goes together with such ease. Very pleased with my purchase and from now on, I will ONLY buy genuine OEM for my baby. Great service Webike, thank you very much View detail
Fits: YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250X, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250X, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250X, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250X, YAMAHA YZ125G, YAMAHA YZ250X, YAMAHA YZ125, YAMAHA YZ125X, YAMAHA YZ250, YAMAHA YZ250X, YAMAHA VMAX, YAMAHA VMAX
Genuine Yamaha Ball Race 2 for VMAX 2016
This bike, the VMAX 2016 came in with steering issues that needed sorting out pronto. The problem was found to be the Ball Race 2 at fault. I used the Webike help pages and tools to track down exactly which part I needed and then cross referenced with Yamaha schematics for this model of bike. Pretty straight forward really, no hassle. The price Webike have these for is really good value and so why not just go OEM. I had a few other parts in the order and got them all shipped together to save a little money and time so they all arrived at the same time. EMS is the courier I use these days as they just get your order to you pretty fast. 5 days fropm shipping and my order arrived in 100% perfect condition. This race also came in teh standard Yamaha packet and was well protected from any damage. The race itself is weel made, I presume it is moulded as I could not see any cnc turn marks. Fitted really well and a great quality part. Very pleased and ahead with the rest of the rebuild. View detail
Fits: YAMAHA 50X (YW50FXL), YAMAHA 50X (YW50FXW), YAMAHA C3 (XF50AW), YAMAHA C3 (XF50W), YAMAHA C3 (XF50XL), YAMAHA C3 (XF50XR), YAMAHA C3 (XF50XW), YAMAHA C3 (XF50YR), YAMAHA C3 (XF50YS), YAMAHA C3 (XF50ZB), YAMAHA RT100 (RT100M), YAMAHA RT100K, YAMAHA RT100L, YAMAHA VINO (YJ50RN), YAMAHA VINO (YJ50RN), YAMAHA VINO (YJ50RP), YAMAHA VINO (YJ50RP), YAMAHA VINO (YJ50RR), YAMAHA VINO (YJ50RS), YAMAHA VINO (YJ50RS)
Genuine Yamaha O-Ring for VINO 50 CLASSIC
This was a small O-ring that was needed for the Vino 50 that was in teh shop. The original was really bad and had started to split. The part was super easy to find witht the help of the tools available on Webike. The price was brilliant and even though it's only an o ring, would you really want to risk a pathetic aftermarket one which will bring your riding to a halt... no. So, this was also ordered along with a few other parts and the shipping was very good indeed. I used EMS fast service as they do exactly what they say they will, deliver FAST, the end. Arrived with me within a week of ordering all the parts needed. All packaged really well as expected and any space in teh box was filled with bubble wrap and air pockets to protect any smaller and more delicate parts from damage. I now it is just an ring but this is an important one that you should be careful with. When I opened the packet, the o ring was perfect, no tears rips, loose pieces of rubber or anything. Yamaha really do know how to make o rings. It was a nice smooth surface and was flexible but not too much as this could also cause issues. Yes, I have made the mistake of buying cheap alternatives before to my detrement, just ended in disaster and had to get an OEM one anway, just do not waste your money on the cheap crap. Stick to getnuine for these things. Fitted within a couple of minutes. Very pleased with my purchase and from now on, I will ONLY buy genuine OEM for this area. Great service Webike, thank you very much View detail
Fits: YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400S, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500
Older years should be considered.
Hi, my Engine has been shutting down lately. It seems to be misfiring when running.
I had a Motorcycle shop look at it and they said that the ignition system, especially the CDI, was probably broken because of the age of the car.
It's a '94 model, as you'd expect...
We have external products such as the ones from Uotani and POSH, but we decided to go with OEM for durability and other reasons.
I think the reason is the durability of the OEM since I bought it used and it has lasted here for 20 years without replacement.
The replacement procedure is not particularly difficult.
Because the side cover is removed and replaced.
good point
After replacing the ○○, Idling is stable and Stall is gone.
Large sturdy for probably another 10 years or more. Six months after replacement, no Trouble.
A bad point
XX Expensive.
Parts tend to be more expensive because the vehicle is out of print, but if OEM Parts are available for older vehicles, please use OEM.
View detail
Genuine Yamaha Crankcase Cover 2 for MT09 2016
This was 1 of 2 cases I needed for an accident damaged MT09. The bike had been in a small accident which resulted in both the crank case cover and oil pump cover getting proper damaged. I found the correct part number by using the tools available from Webike help section. The part was pretty easy to find that way. Webike's price for this part was very good value. A lot lower than I could source locally here in the UK. With some other parts in my basket and shipped by EMS all arrived in 5 days.EMS are good value, very fast in delivering and better than some other couriers. All the items in my order were packed individually by Webike warehouse and all nicely padded out in the box so nothing could get damaged in transit and fill any space with bubble wrap and air pockets so nothing can be bounced about in transit. All arrived at my door perfectly. The crank case cover is a good piece of manufacturing. The threads are really neat and not sharp with burrs or unfinished. The paint on it is a perfect match to the one being replaced, it is a nice satin grey, I think this is a standard Yamaha engine colour paint. It look awesome once fitted. Didn't take too long to fit, pretty straightforward, just eveything in reverse really. Take your time and you will be just fine.I wish I could add more than one image to the review for a before and after which shows the quality of this cover.Very pleased, thank you Webike for all your hard work and dedication. View detail
Fits: YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA FJ09, YAMAHA FJ09
Genuine Yamaha Oil Pump Cover for MT09 2016
This was 2 of 2 cases I needed for an accident damaged MT09. The bike had been in a small accident which resulted in both the crank case cover and oil pump cover getting proper damaged. I found the correct part number by using the tools available from Webike help section. The part was pretty easy to find that way. Webike's price for this part was very good value. A lot lower than I could source locally here in the UK. With some other parts in my basket and shipped by EMS all arrived in 5 days.EMS are good value, very fast in delivering and better than some other couriers. All the items in my order were packed individually by Webike warehouse and all nicely padded out in the box so nothing could get damaged in transit and fill any space with bubble wrap and air pockets so nothing can be bounced about in transit. All arrived at my door perfectly. The crank case cover is a good piece of manufacturing. The threads are really neat and not sharp with burrs or unfinished. The paint on it is a perfect match to the one being replaced, it is a nice satin grey, I think this is a standard Yamaha engine colour paint. It look awesome once fitted, just like the crank case cover does. Didn't take too long to fit, pretty straightforward, just eveything in reverse really. Take your time and you will be just fine.I wish I could add more than one image to the review for a before and after which shows the quality of this cover.Very pleased, thank you Webike for all your hard work and dedication. View detail
Fits: YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA XSR900, YAMAHA XSR900, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA XSR900, YAMAHA XSR900, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09
Genuine Yamaha Gasket Oil Pump Cover 1 for MT09 2016
I needed for the 2016 Yamaha MT09 I have got in my garage. This is a oil pump cover gasket number 2. Also I had to change the actual crank case for this too so a new gasket was a good purchse. The part number was found using the methods I generally use, either the help pages that Webike supply or direct to the manufacturer websites etc. I found the price of these was really good and better than I could source locally here in the UK, just like the other gaskets. As this was part of a larger order with many other Yamaha parts, the shipping worked out to be briliiant. Everything was very well packed and arrived via EMS within a week of ordering. All the empty space was filled with air pockets and bubble wrap. Most of the parts were packed in the genuine OEM packaging anyway. Webike even taped the outer box to ensure, nothing could fall out or escape during transit. The parts all arrived in perfect condition. The gasket was kept nice and flat and did not suffer any bends or mishapen in any way. This is an essential gasket so I had to take a little care in fitting it. Didn't take too long and everything was back together and ready for firing up. The gasket fits perfectly and along with the new crank case, that is one more thing finished off. Very happy with the result. Thanks Webike for your hard work. It really is appreciated. View detail
Fits: YAMAHA YZFR1, YAMAHA YZFR1, YAMAHA YZFR1, YAMAHA YZFR1, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA FZ6R, YAMAHA FZ6R, YAMAHA FZ6R, YAMAHA FZ6R, YAMAHA FZ6R, YAMAHA FZ6R, YAMAHA FZ1, YAMAHA FZ1
Genuine Yamaha Holder, Lever 1 for YZF-R1 2012
The original holder got a little damage from a flying rock whilst out riding and this made the paint come off and get a little dented in places. Not usually a big problem but if you like the bikes to look good, these little things really start to annoy. New part needed to make the bike look better again. Finding the part was not super hard at all, I just used teh tools Webike provide and then cross reference with Yamaha schematics for this model of bike. Webike had this at a really good price so why not just buy it. Along with some other parts in my order, I got them all shipped using EMS, which is now my preferred courier. They just get the job done fast. 5 days after being shipped my order arrived. All the parts were free from any damage and were in perfect order. This lever holder is nothing too special but it also holds the clutch cable and switch from the underside so needed to be right. It has a nice satin black painted finish, all the threaded holes are well machined and it went onto the bars really easily. The time consuming part is removing all the switch gear to get this put on. Massive difference now it looks like the bike is 10 years younger. Very happy with this small purchase, thanks Webike. View detail
Fits: YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA BOLT R SPEC (XVS95CFB), YAMAHA BOLT R SPEC (XVS95CFCB), YAMAHA BOLT R SPEC (XVS95CFCS), YAMAHA BOLT R SPEC (XVS95CFS), YAMAHA BOLT R SPEC (XVS95CGCR), YAMAHA BOLT R SPEC (XVS95CGCY), YAMAHA BOLT R SPEC (XVS95CGR), YAMAHA BOLT R SPEC (XVS95CGY), YAMAHA BOLT R SPEC (XVS95CHCR), YAMAHA BOLT R SPEC (XVS95CHCS), YAMAHA BOLT R SPEC (XVS95CHR), YAMAHA BOLT R SPEC (XVS95CHS), YAMAHA BOLT R-SPEC (XVS95CECGR), YAMAHA BOLT R-SPEC (XVS95CECGY), YAMAHA BOLT R-SPEC (XVS95CEGR), YAMAHA BOLT R-SPEC (XVS95CEGY), YAMAHA BOLT R-SPEC (XVS95CJCGY), YAMAHA BOLT R-SPEC (XVS95CJCL)
Genuine Yamaha O-Ring for FJR1300 2018
I was doing some maintenance on this bike and noticed a small leak from the oil cooler. After some investigation I found that one of the 2 o-rings on the joint was perishing and was not holding as it should. No problem. I checked Webike help pages and got the links to the Yamaha schematics for this model. The part was pretty straight forward to find and does fit a few models anyway. Webike price was excellent as always and so I got a new set of 2 and a couple of spares to save. No point is scrimping and just buying the one as at some point, the other o-ring would need replacing anyway. With a couple of other parts in my basket, I got them all shipped together via EMS and the order was delivered quickly in 5 days from shipping. The o-rings were in teh standar Yamaha packets and inside a small bubble wrap envelope. Yes, they are just o-rings but these o-rings need to work as they should in order to make a good seal from the joints. This was their purpose and that is exactly what they did. They had a lot of flex but that was not a problem as they seated in just the one placement anyway. Job done, no leak, very happy customer. Thanks Webike. View detail
Fits: YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA XSR900, YAMAHA XSR900, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA XSR900, YAMAHA XSR900, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09
To correct rattling of Pedal in Rear Sets
Quantity of 1-positionRear Sets in FAZE before.:Pair (for Left and Right) The included Wave washer to prevent rattling of the pedal was not well-seasoned, so it was very soft and rattled easily. I put this YAMAHAOEM Wave washer in and it worked perfectly.:Pair (for Left and Right) I bought two for two minutes.
Incidentally, COERCE's Rear Sets are probably manufactured by the same manufacturer as FAZE, so I believe this part can also be used.
View detail
Fits: YAMAHA 50X (YW50FXL), YAMAHA 50X (YW50FXW), YAMAHA C3 (XF50AW), YAMAHA C3 (XF50W), YAMAHA C3 (XF50XL), YAMAHA C3 (XF50XR), YAMAHA C3 (XF50XW), YAMAHA C3 (XF50YR), YAMAHA C3 (XF50YS), YAMAHA C3 (XF50ZB), YAMAHA JOG (CG50A), YAMAHA JOG (CG50B), YAMAHA JOG (CY50D), YAMAHA JOG (CY50E), YAMAHA JOG (CY50F), YAMAHA JOG (CY50G), YAMAHA JOG (CY50H), YAMAHA JOG (CY50J), YAMAHA JOG (CY50K), YAMAHA JOG (CY50L)
Genuine Yamaha Ball Race 1 for Vino Classic 2004
This little scooter came into the shop with some major steering issues. Due to the age of the bike I decided to do a full fork strip down including the head, bearings, races etc. When I got really inside and saw exactly what the problem was. Basically all the races were shot, the bearing was pretty nasty and some of the fittings had been totalled beyond any reasonable repair. I decided the best course of action was to simply replace all the parts that were either not great or done for. Finding the correct parts for this job was not super hard as I just used the help pages and links Webike provide. Then I cross referenced with Yamaha schematic for the bike model to make sure. I had a few other parts in the order and got them all shipped together to save a little money and time so they all arrived at the same time. EMS is the courier I use these days as they just get your order to you pretty fast. 5 days fropm shipping and my order arrived in 100% perfect condition. All the parts came in the standar Yamaha packets and were really well packaged. The race has a good finish in silver and the race has been well moulded. I doubt these are cnc'd anyway. The fit is perfect, the bearings were well greased so this race went into place easily. Now to add the other parts to finish off this build. Great job Webike, very happy customer View detail
Fits: YAMAHA CA50K, YAMAHA CE50ES, YAMAHA CE50ET, YAMAHA CG50EU, YAMAHA JOG (CG50A), YAMAHA JOG (CG50W), YAMAHA LC50G, YAMAHA MJ50J, YAMAHA PW50H, YAMAHA PW50J, YAMAHA PW50K, YAMAHA QT50, YAMAHA QT502G, YAMAHA QT50F, YAMAHA QT50G, YAMAHA QT50H, YAMAHA QT50J, YAMAHA QT50K, YAMAHA RAZZ (SH50A), YAMAHA RAZZ (SH50MU)
Genuine Yamaha Ball Race 2 for Vino Classic 2004
This was the second part of the major fork overhaul on the Vino Classic 2004 which was in desparate need of attention. This was for the Ball Race 2. As before, I used teh Webike help pages to track down exactly which part I needed and then cross referenced with Yamaha schematics for this model of bike. Pretty straight forward really, no hassle. The price Webike have these for is really good value and so why not just go OEM. I had a few other parts in the order and got them all shipped together to save a little money and time so they all arrived at the same time. EMS is the courier I use these days as they just get your order to you pretty fast. 5 days fropm shipping and my order arrived in 100% perfect condition. This race also came in teh standard Yamaha packet and was well protected from any damage. The race itself is weel made, I presume it is moulded as I could not see any cnc turn marks. Fitted really well and a great quality part. Very pleased and ahead with the rest of the rebuild. View detail
Fits: YAMAHA JOG (CG50A), YAMAHA JOG (CG50B), YAMAHA JOG (CY50D), YAMAHA JOG (CY50E), YAMAHA JOG (CY50F), YAMAHA JOG (CY50G), YAMAHA JOG (CY50H), YAMAHA JOG (CY50J), YAMAHA JOG (CY50K), YAMAHA JOG (CY50L), YAMAHA JOG (CY50M), YAMAHA JOG (CY50N), YAMAHA PW50 (PW50B1), YAMAHA PW50 (PW50D1), YAMAHA PW50 (PW50E1), YAMAHA PW50 (PW50F1), YAMAHA PW50 (PW50G2), YAMAHA PW50 (PW50H2), YAMAHA PW50 (PW50J2), YAMAHA PW50 (PW50K2)
Genuine Yamaha Ball Race 3 for Vino Classic 2004
This was the third part of the massive total front for rebuild on the Vino Classic 2004 I had come into the shop for help. This time it was for the Ball Race 3. I found the correct part by using the tools Webike have on their help pages and then cross referencing with Yamaha schematics for my own peace of mind. Webikes price for these parts was excellent and better than I could source locally. I had a few other parts in the order and got them all shipped together to save a little money and time so they all arrived at the same time. EMS is the courier I use these days as they just get your order to you pretty fast. 5 days fropm shipping and my order arrived in 100% perfect condition. As with the other parts for this rebuild, the race came in the Yamaha packet and was well padded out inside the box for safety. This race has a lonmger neck but this means there could be more issues which is what happened on the original part. This part however is super clean, well made and the finish is superb. No issues at all, very happy with my purchase, thanks Webike. View detail
Fits: YAMAHA 50X (YW50FXL), YAMAHA 50X (YW50FXW), YAMAHA C3 (XF50AW), YAMAHA C3 (XF50W), YAMAHA C3 (XF50XL), YAMAHA C3 (XF50XR), YAMAHA C3 (XF50XW), YAMAHA C3 (XF50YR), YAMAHA C3 (XF50YS), YAMAHA C3 (XF50ZB), YAMAHA JOG (CG50A), YAMAHA JOG (CG50B), YAMAHA JOG (CY50D), YAMAHA JOG (CY50E), YAMAHA JOG (CY50F), YAMAHA JOG (CY50G), YAMAHA JOG (CY50H), YAMAHA JOG (CY50J), YAMAHA JOG (CY50K), YAMAHA JOG (CY50L)
Genuine Yamaha Nut Fitting for Vino Classic 2004
This was the last part of the rebuild on the Vino Classic 2004 which had major issues in the fork department. This part is the nut fitting which is an essential part for doing such a job as it should be. Finding the correct part was super easy as I utilised the help pages Webike [provide and then cross referencing with the Yamaha schematics section for this model of bike and year. The overall price of the part I needed from Webike was really great, a lot less than I thought to be honest. I had a few other parts in the order and got them all shipped together to save a little money and time so they all arrived at the same time. EMS is the courier I use these days as they just get your order to you pretty fast. 5 days from shipping and my order arrived in 100% perfect condition. The nut fitting came in the regular Yamaha packet and was also inside a bubble wrap envelope. The fitting is an essential part of any rebuild as it keep everything where it should. This is really just a nut but the finish was well presented, there were no burrs or sharp parts. The threaded section is spot on and went on really nicely. The rebuild went according to plan and smoothly and finished the job in good time. The end result is a good bike with steering to match. Well impressed with how Webike operate and just get the orders out. View detail
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA R1 Limited Edition, YAMAHA R1 Limited Edition, YAMAHA R1 50th Anniversary, YAMAHA R1 50th Anniversary, YAMAHA R1, YAMAHA R1, YAMAHA YFZ-R1, YAMAHA YZF-R6 W/ FLAMES, YAMAHA YZF-R6 W/ FLAMES, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6
Genuine Yamaha Screw Set for YZF-R6 2006
I needed to replace the front brake screw set as it the original were failing and the head was mashed nd this did not make the bike look good at all, I decided I would change these for OEM screws as they fit with the age and how it looks on the bike. I went for the standard OEM Yamaha ones as this is what would look best by far. The correct parts was found using the tools Webike provide and cross referencing with Yamaha's own schematics. Best price ever for this set of screws and better than I could source locally. With some other parts in my order, all were shipped together with EMS and arrived in perfect condition in 5 days from shipping. The parts were well packed and no damage was sustained during transit. The screws that were on the bike had gotten a little chewed up but these are absolutely perfect and make the bike now look a lot better. I also purchased a brand new front brake reservoir cover too so the job got done correctly. Works a treat. Very pleased with this purchase, thank you Webike, awesome every time. View detail