Reviews
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB70, HONDA SUPER CUB70, HONDA SUPER CUB70, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA CUB press 50, HONDA CUB press 50
As you can see, the new one is beautiful.
Headlight ring is rusty and rusty, replaced with a new one.
After all, a new one is beautiful.
But I bought it according to the Parts List.
It didn't fit tightly on the Body side and there was a gap.
Why not?
I'll need to do the Waterproof process later...
View detail
Fits: SUZUKI GN125E, SUZUKI DR350SE, SUZUKI DR350SE, SUZUKI DR350SE, SUZUKI DR350, SUZUKI DR250SE, SUZUKI DR250SE, SUZUKI DR250, SUZUKI GN125E, SUZUKI DR350SE, SUZUKI DR350SE, SUZUKI DR350SE, SUZUKI DR350, SUZUKI DR250SE, SUZUKI DR250SE, SUZUKI GN125E, SUZUKI DR350SE, SUZUKI DR350SE, SUZUKI DR350SE, SUZUKI DR350
Clutch Lever Boots
Rubber cover to cover the clutch wire adjuster.
Although we did not use it this time, it is truly a Universal Product.
View detail
Fits: YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA FZ6, YAMAHA FZ6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA FZ6, YAMAHA FZ6, YAMAHA FZ6, YAMAHA FZ6, YAMAHA CHAMPIONS LIMITED EDITION (YZFR6SN), YAMAHA CHAMPIONS LIMITED EDITION (YZFR6SNC), YAMAHA FZ-6 (FZS6V), YAMAHA FZ-6 (FZS6VC), YAMAHA FZ07 (FZ07FCGY), YAMAHA FZ07 (FZ07FCR), YAMAHA FZ07 (FZ07FCW), YAMAHA FZ07 (FZ07FGY)
Replaced old for OEM new
My old one was damaged in the small off I had and rather than buy expensive or really cheap aftermarket, I decided to go for the OEM levers.I managed to find the correct lever using the links and tools provided by Webikes help pages etc. The lever was pretty good in price although you could get a cheaper aftermarket but then you would be wondering if it would fail at any point. You really do not want a clutch lever to fail when you might need it the most.Shipping was good and fast, I used EMS this time around and it all arrived in just under a week. All fitted really well and the finish was perfect.Nice satin chrome which looks the bizz. Thank you Webike, great service View detail
Fits: YAMAHA R1, YAMAHA R1, YAMAHA R1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1
Genuine Yamaha Lever
Changing out some of my worn lever from project bikes. Due to the climate here in the UK, when I ride my bikes in all weathers, they get a little tarnished and no matter what I do, the finish never comes back. I found the correct part using the tools provided by Webike and the links to the main manufacturers. This lever fits a few different models so is relatively easy tp get a hold of. Unfortunately, here in teh UK, they charge too much and this is why I purcahsed from Webike. I had other items in the same order and the shipping was spread out across the lot which worked out great value for express shipping, EMS is what I used this time. Delivered to my door in less than a week from placing my order. All items in the package were protected with bubble wrap and any empty space which would allow movement was filled with air pockets. No chance of any damage. When I unwrapped teh lever, I was very pleased with the overall finish, not dull but not shiny, perfect. Fitted in liek 5 minutes or so and the look of my bike now is great. Thank you Webike for providing such a great service. Everything is easy to do from finding your part, adding to basket and placing your order. Just sit back and wait for your package to arrive View detail
Fits: SUZUKI DR650SE, SUZUKI DR650SE, SUZUKI DR650SE, SUZUKI DR650SE, SUZUKI DR650SE, SUZUKI DR650SE, SUZUKI DR650SE, SUZUKI DR650SE
The clutch part was bent so I bought it.
The clutch part was bent so I bought it.
The product is in good condition and the delivery is fast. I will use it often
I was looking for a genuine 2007 DR650SE product, but there was no cheaper place than here. I use it every time I purchase a product, and the site is very reliable, the product is in good condition, and the delivery is fast. There has never been a misdelivery. We will use it often. -------------------------------------------------- -------- The clutch part was bent and I bought it. The product is good and the delivery is fast. I will use it often I was looking for the 2007 DR650SE genuine product, but there was no cheaper place than here. It is used every time to buy a product, and the site is very reliable, the product is good and the delivery is fast. There is no misjudgment. I will use it often. Powered by Google Translator
View detail
Fits: SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman, SUZUKI Burgman
New brake switch
Due to a small off this got damaged, do not ask me how that happened as it has never happened before even with bigger offs. Anyway, I found the part by using the Suzuki schematic which you can find on the internet. The cost was very good indeed and better than I have seen locally. Along with other item in this order the shipping was very cheap. I had a lot of small items in this order!. From ordering to the actual delivery to my door took just over a week. Brilliant. The finish of the switch looks great but you can only tell if it's good until after fitted and trying. Took literally minutes to fit. All works as it should and I am one happier biker. Great service Webike, keep it up View detail
Fits: SUZUKI GSX1300R, SUZUKI GSX1300RAZ, SUZUKI GSX1300R
Genuine Suzuki lever
My old one was damaged in the small off I had and rather than buy expensive or really cheap aftermarket, I decided to go for the OEM levers. The lever was pretty good in price although you could get a cheaper aftermarket but then you would be wondering if it would fail at any point. You really do not want a brake lever to fail when you might need it the most. Shipping was good and fast, arrived in just under a week. All fitted really well and the finish was perfect. Thank you Webike, great service View detail
Fits: SUZUKI GSX-R1000AM0, SUZUKI GSX-R1000RAM0, SUZUKI GSX-R1000RZAM0, SUZUKI GSX-R600L9, SUZUKI GSX-R750L9, SUZUKI GSX-S750AL9, SUZUKI GSX-S750YAL9, SUZUKI GSX-S750ZAL9, SUZUKI GSX-S750ZL9, SUZUKI SV650AL9, SUZUKI SV650L9, SUZUKI SV650XAL9, SUZUKI GSX-R1000AL8, SUZUKI GSX-R1000L8, SUZUKI GSX-R1000RZL8, SUZUKI GSX-R600L8, SUZUKI GSX-R750L8, SUZUKI GSX-S1000AL8, SUZUKI GSX-S1000AZL8, SUZUKI GSX-S1000FAL8
New throttle grip
After my bike got some damage from a small off this grip was also damaged so decided to go for the genuine Suzuki one. The price was really good and better than I can get locally in the UK. Shipping was reasonable as I got with other items. SHipped by Fedex and arrived within a week. Wow, how good is that!. All items in teh order were packaged and wrapped really well so no problems with that at all. I am frustrated at the fact I never discovered Webike before now. If I had only knew ordering was so easy from here, I would have used them years ago. All in all, the service received was excellent. Keep up teh great work Webike View detail
Fits: HONDA CT125, HONDA XL125, HONDA XL125
Mounted on SEROW225
Tandem's pwkcarburetorQuantity:The Throttle set was not a High Solo set, so I added this one. It is not a high solo, but a little bit throttle. I also drive on public roads and go to the mountains in Maine, but this is a good match for me. I recommend it for its good cost performance. View detail
Fits: YAMAHA TRAILWAY, YAMAHA TRAILWAY, YAMAHA TRAILWAY, YAMAHA TRAILWAY, YAMAHA TRAILWAY, YAMAHA TRAILWAY, YAMAHA TRAILWAY, YAMAHA TRAILWAY, YAMAHA TRAILWAY, YAMAHA TRAILWAY, YAMAHA TRAILWAY, YAMAHA TRAILWAY, YAMAHA TRAILWAY, YAMAHA TRAILWAY, YAMAHA TRAILWAY, YAMAHA TRAILWAY, YAMAHA TRAILWAY, YAMAHA TRAILWAY, YAMAHA TRAILWAY, YAMAHA TRAILWAY
Clutch Switch
Clutch Switch awesomeness I recently install this OEM clutch switch to my tdub because previous clutch switch didn't work properly my bike couldn't start in neutral. after replaced ,Boom! It's works & funtion properly .In sri lanka I coudn't find a single OEM spare parts shop. so I always come to the webike shop when I need spare parts for my bike. this is the only shop you can get parts for reasonable prices View detail
Fits: HONDA CB1000R (2018-), HONDA CB1000R (2018-), HONDA CB1000R (2018-)
Reliable OEM Product
[How is it used?
Purchased for Gripfor Replacement.
How was your experience with it?
It is an OEM Product and there is nothing wrong with it.
Grip heater comes standard and is an expensive Grip (consumable).
The replacement of the harness is a little bit time-consuming, but since it is an OEM product, it can be replaced without any trouble. (Just replace as per the service manual.)
[Points to note]
A paper with a warning is included in the package.
Other items that would be helpful
Items to buy together
Grip bond、Parts cleaner、Dustcloth
View detail
Fits: HONDA NSR250R, HONDA NSR250R, HONDA NSR250SE, HONDA NSR250SE, HONDA NSR250SP, HONDA NSR250SP
Switch Color
We were concerned about the discoloration of the color of the ON/OFSwitch part of the installed product, and since it was 27 years old, we replaced it with a new one.
The part number seems to have changed, but compatibility and installation seems to be fine. sold by HondaOEM Product, new, Red color is beautiful and I am satisfied.
View detail
Fits: HONDA NSR250R, HONDA NSR250R, HONDA NSR250SE, HONDA NSR250SE, HONDA NSR250SP, HONDA NSR250SP
exchange
I purchased this product to replace the handlebar grips and to replace the pipes with new ones when I do maintenance on the wires.
The installed product was old and discolored, so we were able to replace it with a new one from the same OEM Product.
View detail
Fits: HONDA NSR250SE, HONDA NSR250SE, HONDA NSR250SP
Replace with new one
Since it is unknown when the installed item was replaced, it will be replaced with a new one.
Sold by HondaOEM Product, the price is not that much, which is helpful.
View detail
Fits: HONDA CB1100, HONDA CB1100N, HONDA PCX150, HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA ADV150, HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100S, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F
Replacement Chrome Bolt Caps
The original OEM chrome bolt caps on the handle bar top clamp become scratched and in poor condition due to my key chain rubbing on them while riding. This became an eye sore on my motorcycle so I had to source new ones. Using the on line Honda OEM parts finder it was simple to find the correct part number and after a search Webike appeared. The chrome is very soft and you need to be very careful when removing and installing as not to damage them but if they do become damaged at least they are pretty cheap to replace. View detail
Fits: SUZUKI RM85L9, SUZUKI RM85L8, SUZUKI RM85, SUZUKI RM85, SUZUKI RM85, SUZUKI RM85L, SUZUKI RM85, SUZUKI RM85L, SUZUKI RM85, SUZUKI RM85L, SUZUKI RM85, SUZUKI RM85L, SUZUKI RM85, SUZUKI RM85L, SUZUKI RM85, SUZUKI RM85L, SUZUKI RM85, SUZUKI RM85, SUZUKI RM85L, SUZUKI RM85L
Installed in the hope of preventing dust and moisture from entering the Clutch Cable.
[How is it used?
I've been using it for about 6 years, including before the diversion (but not during storage).
Was the one you received as per Image?
(Omitted because I appropriated the one used in the Motorcycle I used to ride)
How was your experience with it?
The 400X did not have a Dust cover on the Clutch Cable.
When I was thinking what to do, I thought that I could use the dust cover of SUZUKIOEM Parts which I kept. When I was thinking what to do, I thought that I could use the dust cover of SUZUKIOEM Parts.
I actually installed it and it just fit to 400X (^_^)
It does not interfere with the hand guard and I have been using it for over 5 years without any problems.
I'm glad I installed it because it also covers the base of the Clutch lever.
I think it is preventing dust and moisture etc. from entering the Clutch Cable (Quantity):(See the photo posted in 1pc. eyes)
These parts have been stored in a tool box for almost 20 years, but they are still in use without any deterioration etc.
The overall rating is 5 stars, including the self-satisfaction (^_^;) that I was able to divert OEM parts of another manufacturer that were sleeping.
Was the installation difficult?
If you are a do-it-yourself maintenance person, the installation is not so difficult.
What is the point or hang of the installation?
Remove the retrofit hand guard (https://www.webike.net/sd/24163393/) beforehand.
Remove the Clutch lever and Clutch Cable, and pass the Cable through the Dust cover.
After that, install the Clutch Cable and Clutch lever as before.
By the way, I replaced the Clutch lever with a SPEEDRA one (https://www.webike.net/sd/21650337/) from OEM at this time (see the second posted photo).
After adjusting the play of the clutch lever, put the Dust cover over the base of the lever.
[Was there anything that disappointed you?
Nothing special at the moment.
[Was the Instruction Manual easy to understand?
(No Instruction Manual is provided.)
[Included Parts:were they on?
Included Parts:is not included
Please let us know if you have any opinions or requests to Manufacturer.
Nothing special at the moment.
[Do you have any products to compare it to?
・KAWASAKI:Boots,Lever Holder 49006-1017
(https://www.webike.net/sd/24350674/)
Although this time it was the diversion of SUZUKIOEM Parts, when the blog of the person who is riding on NC700X is referred, it seems that the Dust cover of KAWASAKI OEM Parts can also be diverted (when actually diverting, please be self-responsible).
[Others]
The OEM Parts (part number:57341-40003) that is the subject of this impression is the successor to the OEM Parts (part number:57341-40001, the part number is confirmed in the old Parts catalog (see the third posted image)) that is actually installed.
It is not clear if only the part number was changed or the actual content of the part was changed...
Incidentally, the OEM Parts that I am installing were removed from my old DF200 DJEBEL (https://imp.webike.net/bike/0017015/) and stored (because they were no longer needed when I installed the OEM Option Knuckle cover (https:// (Because it became unnecessary when the OEM option Knuckle cover (www.google.co.jp/search?q=57300-05810-30H) was installed).
I write the imprecation referring to the item Template prepared at the time of posting the imprecation (https://www.webike.net/commu/impre/).
View detail
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA R1 Limited Edition, YAMAHA R1 Limited Edition, YAMAHA R1 50th Anniversary, YAMAHA R1 50th Anniversary, YAMAHA R1, YAMAHA R1, YAMAHA YZF-R1, YAMAHA R1, YAMAHA R1, YAMAHA R1, YAMAHA R1, YAMAHA YZF-R1, YAMAHA YZF-R1
Yamaha OEM Switch, Handle 2
The original switch on the YAMAHA YZF R1 RN12 05. I have a mileage of 86,000 km on my motorcycle and a contact has broken recently. Now I am planning to buy a new switch. View detail