Reviews
KTCCombination player
I purchased this item because I only had Pliers on the car.. All KTC tools are accurate and easy to use. I can trust you very much.. View detail
Necessary enough
It is cheap, but it is necessary and sufficient performance.
I do not know where I can endure full-scale use,
As a hobby Rider, it is not too much to use so far,
It is very easy if you have Ring kind installation.
View detail
Why is Webike selling higher than the list price.
I tried to purchase Pliers with high Cost performance with 150 mm size Simple, Shrimp and TOPetc. I bought it here compared with.
It is worth noting that the data posted on Webike is from previous MODEL or is completely different from the data of CP - 150 currently on sale. Since the performance of the data of the current MODEL is improved more than the published data, we recommend you to check with Manufacturer HP if you are considering purchasing.
By the way, the quality of the product is very high, it is natural but it does not compare with the on-board tool. Once you use good quality Pliers you will no longer feel like using an on-board tool.
It is not a very expensive tool and it can be recommended for many people because it can be used for a long time.
View detail
It was easy to use.
I used it to set the Snap ring with Oil attached. I never slipped and it was good.
It was also possible to change the angled tip by Smooth, enough to push the Clip into a narrow place.
View detail
This is for Master cylinder disassembly!
Nisshin1 / I used it for disassembling 2 for FrontMaster cylinder. Because it is 90-degrees, the hole of the Snap ring is easy to see, the tip is long so it was easy to remove it! It is very convenient, but it is not rarely used tool, so personally I feel a bit high.. View detail
Incidentally
We shopping a lot with Wei Big and purchase it at the same time because there was a business to use. I only used once, I do not know the durability, but I think that it will not break unless it is treated roughly. I think that the price is reasonable as well. View detail
Easy - Convenient.
Small people are just right for two wheel maintenance!
There are considerable pliers, similar items (I think that the function is fine) However, even if it is a little expensive "KTC" I bought it because it is good. I think that the difference with similar products is durability.
View detail
Decided version of mobile tool
Photo Left is 250, Right is 180 Size purchased this time for car.
It is a very expensive tool so I hesitate to purchase for a while but I think that once you use it you can not use ordinary MONKEY.
I will remove Mirror on the ground when I go off for play, but Main of use is that.
Of course there are places that can not be used spatially, but you can definitely reduce car-mounted tools.
As Regular to use at home, we recommend absolute 250, but it is quite Large.
If it becomes Size under this it will limit the Bolt size loosened before portability.
At that point 180 depending on the fight (Lol) Axle can manage somehow.
I think that you can be satisfied even with Tsuyomono saying Puncture repair at the forest road.
In addition, this is Communal to all sizes, but I can do it quickly.
Absolute Recommendation
View detail
If the Grip part is a noticeable color a little more.
When I crashed Screw's head, I bought it because I was struggling except for Sarah Screw.
Screw Zaurus of Engineer is the MAJOR of Pliers which removes this Screw, but it is also KTC, TONE and 3. Peaks Giken etc. are selling similar things.
Originally I planned to buy ScrewZaurus, but when I use ScrewZaurus in the home center's Corner, if I grab ahead or grab a Stainless screw or high strength Screw, not only from Screw but also from Pliers' point of view Gold soup comes out.
Looking at Impre of a certain site, some people who have impressions like me seemed to be a bit somewhat.
So, if you are looking for KTC or TONE 's ScrewPliers that are well - established for tool quality, I discovered that KTC' s Screw Pliers sell under 1,800 yen on this Weig and bought it.
It has the same shape as PZ - 55 of ScrewZaurus, but PZ - 55 is 15CM, but this PSN - 175 is slightly larger than 17CM and is Large. That's why you can grab the 6 mm Meter Screw first. (Up to 5 mm Meter for PZ - 55)
When using it, ScrewZaurus is soft in Grip part and does not dig into the hand, but as Grip gets sharp, it gets a little out of power when turning with force.
On the other hand, this KTC's PSN-175 can be turned around without doing any grip.
Moreover, the bearing part also has a rigid feeling more than ScrewZaurus, and there is not worry about wobbling.
However, Home centeretc. It is very somewhat compared with the product of Green color which is not used for a tool such as ScrewZaurus because it is not MAJOR and it is a red color Grip unique to grab object system tool..
I often mistake Radio pliers in my tool box. In this regard, TONE's collapsed screws Pliers are more conspicuous because of Green color Grip similar to ScrewZaurus.
As the product has high quality as KTC, I think that if you make the Grip part stand out color it will sell a little more.
Anyway, if you purchase this item, is not it probably the cheapest way to purchase with Wye Big?
View detail
Durability is unlikely
Used to remove Pulley of CYGNUS X.
Although I have bought several times so far, it is easy to use without slipping out of the new item, but as I use it many times, the Rubber part got sore and it got caught and it got slippery.
I hope more durability of this Rubber part.
But the ease of use as a tool is a good feeling.
Since I could not use Small because of Small in the Clutch Outer of CYGNUS X, I added Bracket to the root part and extended it for use.
View detail
Convenient with Angle Difference Attachment !!
I always used Radio pliers to detach E Ring
I have experienced losing and dropping peaking many times
I bought a special tool this time.
Usability is a good feeling. Set of angle difference of Attachment is also
It was really useful and I did Big!
Price is also cheap Recommendation!
View detail
Fits: HONDA ADV150, HONDA PCX125, HONDA PCX125, HONDA PCX160, HONDA LEAD125, YAMAHA NMAX, YAMAHA CYGNUS X, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA MAJESTYS, YAMAHA NMAX155
Early, but ...
Unlike the Holder of the type to be tightened, unlike the Holder of the type to be tightened, if you adjust the Size, you can operate with One-touch so you can work efficiently, but the scenes that can be used will be limited as well.
I practically use it only when fastening Flywheel like a photo. In this usage case, this type of tool is faster because the operating angle is limited when tightening Type.
However, since it takes plenty of space in the tool box more than not to be used much, I can not recommend it except for those who can afford Space.
For those who are looking for the first tool to fiddle with Scooter or who want universal nature, we recommend Holder of type to be tightened.
http : / / www. webike. net / sd / 21784446 /
There is a Type with a "claw" on the inside with a tool similar to this, which can also be used for Pulley with teeth on the outer periphery, like Honda type, so this type is recommended here.
http : / / www. webike. net / sd / 21331222 /
As a digression, since the tool of this hand has no unified name, it is troublesome when searching. Universal holder, Pulley holder, Fly Wheel Holder, Scissor Holder, HandHolderetc. ...
View detail
Speaking of grabs
【What made you decide the purchase?】 Speaking of grab things, Kunipex!
【How was it actually used?】 I bought it for 2 types of electric worker examinations. (eh?) Bashibashi copper wire will be cut. I can not find anything like Damage on the blade.
[Is there anything I was disappointed about?] nothing special
【Hope for Manufacturer - Please tell me if there are any improvement points】 No particular
【Have you compared items?】 It was a Kunipex one choice.
View detail
Fits: HONDA ADV150, HONDA PCX125, HONDA PCX125, HONDA PCX160, HONDA LEAD125, YAMAHA NMAX, YAMAHA CYGNUS X, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA MAJESTYS, YAMAHA NMAX155
It may be necessary for ScooterMaintenance
MAJESTYS 'V Belt - Weight Roller Purchase for replacement. High Speed ??Pulley was manufactured by DAYTONA among a number of Manufacturers, so we selected one made by DAYTONA. Because it was made by the same DAYTONA, the hole to be caught was Exactly. There is no problem at all in function, making is also firm and made by DAYTONA.
View detail
To remove the Exhaust retaining Ring Clip
I bought it to remove the XL 1200 C SPORTSTER 1200 Exhaust Retaining Ring Clip. I also thought about purchasing a special tool, but since it is a waste that I can only use it to remove the retaining Ring Clip, I made this product that can be used with Universal. Therefore, although it took a bit of effort to work, I could remove it.
Attachment also comes with 4, I think that it is a bargain. I will also use it for other work.
View detail
Lifetime water pump pliers
Although I had some WPPliers, I did not have anything with a tip Slim so far. Detailed around the Radiator of Off-road motorcycle - Purchase to use it in a narrow place. It is very easy to use. Grip is Red - It's not Blue's Comfort but this is a grip with this and I do not have a grin.
Since WPPliers has a lot of Size, it is a good place for KNIPEXTool to choose various things according to your own motorcycle and use purpose. The price is expensive as it is, but I think that it is cheap if it thinks as a tool that can be used for a lifetime. I think that it can actually be used!
View detail
Usability Large Satisfied Pliers wrench!
I bought it as one that can relax Axle Nut of my Motorcycle. This one can also do urgent work when you do not have MONKEY or Glasses so mountains and Touringetc. It is also ideal for a carrying tool to bring to. It became an indispensable tool also when repairing Puncture on mountain and removing Wheel.
Will not it be possible to impersonate it for Size as well as for carrying Bag. With this one tool is not necessary for MONKEY or Axle Nut. (It is the case of going out and emergency)
Please check your Motorcycle's Axle and choose the corresponding Wrench size.
The price is also expensive, I think that it is corresponding or more Tool.
View detail
Easy to use for the first
Used for Wiring such as Oil Filler Cap and Grip.
Even for the first time Beiring was able to Wiring. Easy to use Cost performance is a high tool.
View detail
Because it became necessary suddenly
In order to replace the Brake pedal, looking over the Step plate and seeing it, have you stopped by Circlip?. It is a sharp purchase as there was no tool that could remove this.
It is appreciated that less frequently used tools are available cheaply. This time it was only one time use, but there are no particular problems such as turning ahead. Even if it is broken, I should buy it again. Even if you do not need it right now, you can buy one for this price.
View detail
KNIPEXKNIPEX Adjusting Pliers
I purchased to fix the curved fins of Radiator and Oil cooler.
I tried to colorize the neighborhood's home center, but I can not find a good one and I found a color in Net. I arrived at KNIPEX. Applications for Relay adjustment.
Made in GERMANY Forged quenching The texture is different from what you sell at Home center. Smaller and lighter than general Radio pliers that can be purchased at Home center. Thanks to that, we can work without introducing chicks so it was suitable for repairing Delicate fins.
Even if the tip is thin, it was a wide and gentle round shape so it is perfect for repairing the fins.
View detail