Reviews
Exactly
I used this screw around the meter on my gsr. 1pc. rolled off and I lost it, so I used a different screw, but I ordered it from OEMParts. I knew that proper OEMParts is the best! The picture showed Silver and Black, but the Black one came. View detail
Stainless Steel
Change to Stainless capFixing Screw to prevent rusting.
There are no varieties or sizes nearby, and this place has a wide variety of products.
View detail
I feel good
I think it is the best cospa.
I think this Titaniumium Bolt is inexpensive at this price.
View detail
Number theft prevention
A regular Hexagon Bolt would be fine.
Replaced with Torque, which may help a little with theft prevention anyway.
View detail
For CaliperMount
The Bolt that came with Caliper support was
Replaced with a regular cap bolt because of the way it looks.
They wanted to look good with Titanium anyway.
Maybe it would have been better if it wasn't perforated.
View detail
Depending on how many you have, you may be able to buy them at the homestead?
5mm×16mm tapping screw
Screws to fasten the lid of the air cleaner
If you know the length, maybe Homesense is cheaper?
This is for people who do maintenance and should have a spare.
View detail
craftsmanship
In the attached photo, the Caliper side is Bolzen's Titaniumium Bolt and the OuterCase side is a Titaniumium Bolt of the same standard made by another company.
The Bolt made by Bolzen is terribly elaborate in every detail, such as the screw head and the core of the shaft.
It is twice the price range of other companies' Bolts produced overseas, but it is more than worth it.
If anyone is comparing Bolt with other companies, I would definitely recommend Bolzen.
The Caliper Mount Bolt for the Sumitomo OEM brembo is M10 P1.25. For your reference ….
View detail
Mounted on Exhaust Bracket
It's a ZETA and it's definitely accurate and easy to use! View detail
No imprint on the head.
Thanks to its accuracy, it clings to the Snap.
Too bad there is no imprint on the head.
Grease was applied to the surface because it was used as a cover for the oil filter.
View detail
Used for Oil filter
It is unfortunate that there is no engraving on the head of the Bolt, but the difference from other Bolts is Fashion View detail
No complaints except CenterGap.
I used it on the Handlebar Clamp of my Bonsai Motorcycle. The part where the Hexagonal Wrench is inserted is gapped from the center, but there is no rattle at all, so it can be tightened firmly with Torque. I think it is a good cost performance to replace the rusted bolt as it gets rusty. View detail
Cheaper than Homesense
I can't believe the price for a pack of 5. Is there a profit to be made? I bought these bolts because the iron bolts on my car were rusting and I wanted to replace them. I bought these bolts because the iron bolts on my car were rusting, and with this quality, I would be happy to replace all the iron bolts on my car. View detail
footpegBolt for Replacement
I have converted to Rear Sets for OEM diversion, but the NORMAL screws were not long enough, so I bought them for replacement.
Posh Screw is written with the proper strength, so I was able to use it with confidence. I have not had any problems so far, even though it is a weight-bearing part.
View detail
good (quality)
The product is better than the price.
I'll buy the other Size's because they're so cosmetically pleasing!
View detail
To one point!
I think it is good for One point, but the price is…. View detail
Good accuracy
Purchased as a replacement for an OEM Bolt that had broken.
Accuracy is not a problem, but it is a pity that the Head does not contain the ISA Logo.
View detail
of high quality
[How is it used?
We are using it for Caliper bolt in WR.
Was the one you received as per Image?
It was as shown in the Image, but unlike the image, the Logo of ISA is not included.
Was the installation difficult?
No problems
Fixed using Torque wrench
How was your experience with it?
I was using ZETA's Bolt.
It seems more accurate than ZETA's Bolt.
[Included Parts:were they on?
Bolt only.
[Was there anything that disappointed you?
Logo of ISA is not included.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
AGUSTA
I bought it because of the way it looks. maziora blue would have been better. View detail
Rare Material:Stainless Steel's BlackBolt!
[How is it used?
Since the Headlight Bracket was changed to Black, the Bolt stood out from the Silver one.:I looked for Stainless Steel with Black Painting and finally found it.
Was the one you received as per Image?
It was more matte than Image, but the paint never peeled off and the accuracy is fine.
Was the installation difficult?
The Bracket section requires a collar, but can be used with Bolt On.
How was your experience with it?
I like it better than the NORMAL because it is chic and less noticeable and the paint does not peel off due to tightening.
[Included Parts:were they on?
Nothing.
[Was there anything that disappointed you?
Nothing in particular, but the price aspect is Quantity:1 Set of 2pcs. seems a bit expensive while
▼Material that wasn't even a Screw specialty store.:The Stainless Steel Black Bolt is very appreciated. Especially, the lineup of lengths is also very good.
View detail
Things are good.
Great price, great quality!
I bought it on a trial basis and it was so good that I will buy other lengths as well.
View detail