Reviews
Savior of old cars
Tail lamp rated 12V23/8W S25 BAY15d StanleyA (BP) Replacement from 4879.
Quite good! Decided to come back here next time!
It is a bit expensive, but I definitely recommend it over purchasing cheap Chinese or other products that are more of a gamble and have many initial defects.
Not the common Red, not the annoying White explosive light, but a soft light emission similar to a bulb color as described.
I wanted to replace the one in my car.
This is a lifesaver for old car drivers who had given up on LED Tails because they were the only cool multi-light LEDs.
The phenomenon where the Blinker would not blink at intersections at night unless the Axel was blown, which is a common problem with old cars, has been greatly improved.
View detail
Standard will be this next time.
Double Bulb is used for Tail lamps, and I'd rather use a reliable brand with Stanley's name on it, rather than looking for a cheap one.
It seems like this is the only place to go for LEDs in Valve in the future.
The light distribution is not the same as that of a light bulb, but it is well thought out, and I did not notice any discomfort in the point light state.
We have not experienced any problems with the use of the License Plate Light as well.
View detail
Fits: HARLEY-DAVIDSON Universal
Required for MooneyTail.
I used it on a Kawasaki 250TR Tail lamp (MooneyTail). It works fine, but it interferes with the lens unless you use a short bulb. I bought a regular bulb without knowing it and had to buy a new one. View detail
It's nice.
I replaced it with LEDs because I thought that LEDs consume less power and are more battery-friendly. The brightness is moderate, and the engine speed does not change even if the stop-lamp is turned on during idling, so it seems that the burden on the battery has been reduced. View detail
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
good-looking
As for brightness, I did not find it too dark as others have mentioned. The power consumption is quite low, as LEDs are the only light source. I don't know about durability as I just installed it. It works well. View detail
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
Contribute to power saving! Can be attached with a pontoon!
It is slightly darker than the OEM Valve, but is at a practical enough level.
Navigationetc. We have installed a lot of things to save power as much as possible.
Glad you're contributing! It's easy to pimp and it's RECOMMENDATION!!!!
View detail
Fits: その他
Reliable Japanese Pine Stripe
This is for daytonalucas installed the other day.
LED bulbs.
Using the same product since Normal lamp
I have used it in the SR with a lot of vibration without any trouble.
I used it for over 3 years.
License Plate Light has White color and Bulb color with Pin position.
Please note that there are different types.
View detail
Fits: HONDA SUPER CUB 50, HONDA GYRO CANOPY, HONDA Universal, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50
Energy-saving, yet very bright.
AB26 12V used for DAX Tail lamp.
It is a good price, but we have changed everything to LED except the Tail.
I was excited to purchase this time.
I wonder if it is compatible with T20Double Bulb so it can be used for CUB etc....
Anyway, I thought the exchange was a good idea. It's so bright! Yes
Moreover, the voltage drop during idling is at the smallest limit, and the burden on the battery is very small.
I think it will be considerably reduced. By the way, with my DAX.
Before replacement, Tail:11.7V, Tail + Brake:11.2V.
After replacement, Tail:11.5V; Tail + Brake:11.5V.
It should be noted that the voltage does not change when Brake is applied. This is great!
The LEDs were replaced after I got home and have not been running, so the voltage may be low.
The rest should be long-life, even if the LEDs themselves are long-life.
The voltage adjustment circuit or something like that could break and stop it from turning on...
View detail
Used in older CUBs
The LED Bulb is more comfortable than the LED Bulb made by a certain M company because it is reflected by the reflector, so there is no sense of discomfort when viewed from any angle, and because it is the same color as the White Heat Bulb, the Red LED light does not leak out from the colorless part of the Lens used to illuminate the Number when the Stop lamp emits a strong light. It is recommended. View detail
The cheap buy.
I bought two and both ran out after about a month.
The tail light is 6W and the wire is thinner than the domestic 5W one, so I wondered if it was Large sturdy. I thought so, but it was not Large sturdy.
I still prefer to use lights made by a proper manufacturer.
View detail
Fits: YAMAHA MAJESTY250 (SG20J), KAWASAKI ZEPHYR 400χ, KAWASAKI ZEPHYR 400χ, KAWASAKI ZEPHYR 400χ, KAWASAKI ZEPHYR 400χ, KAWASAKI ZEPHYR 400χ, KAWASAKI W400, KAWASAKI W400, KAWASAKI W400, KAWASAKI W400, KAWASAKI VULCAN 900 Custom, KAWASAKI VULCAN 900 Custom, KAWASAKI VULCAN 900 CLASSIC, KAWASAKI VULCAN 900 CLASSIC, KAWASAKI SUPERSHERPA, KAWASAKI KSR110, KAWASAKI KSR110, KAWASAKI KSR110, KAWASAKI ELIMINATOR 125, KAWASAKI ELIMINATOR 125
Single Cylinder Engine's Crying Point
The SR, CUB, and of course the ESTRELLA… are all single cylinder engines, so there is a lot of vibration, and the tail lamp bulbs are prone to breaking.
I thought about stocking a lot of cheap bulbs, but Stanley uses them for motorcycles and cars because they meet safety standards.
The bulbs are prone to breaking, but they last quite a while.
good point
OEMs use this product for both motorcycles and automobiles, so the safety standard is also applied. [Color] Clear。
Relatively high durability.
Easy to replace. Even beginners can do it.
A bad point
A little expensive.
Large is strong during the daytime, but at night, if the tail lamp is off, following cars will not notice it, so be careful if you drive a single-cylinder engine that vibrates a lot.
I will get a ticket.
View detail
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
Disappointed with low life expectancy
ADDRESSV125 CF46A has been converted to LED Bulb for low power consumption.
He passed away after about three months.
Inferior to Chinese products in spite of high price
View detail
It is bright. And it works without a glitch!
[How is it used?
We were the first to replace all NORMAL bulbs with LEDs.
Was the one you received as per Image?
I thought it was a little cheesier than Image.
Was the installation difficult?
It is easy, because all you have to do is replace the bulb.
How was your experience with it?
It was a SocketOn on a CB1100.Wiring was no problem and it is nice and bright. The durability is also no problem even after 6 months.
When I first used it on another car, I put the Brake Wiring and the normal PlusWiring on in opposite directions, so I could hardly feel the difference between the Brake and normal lighting.
I have seen similar descriptions from other impresarios, but I think this is a symptom of when the Brake wire and the normal Plus wire wiring is reversed.
[Included Parts:were they on?
There are no Included Parts:other than the bulbs.
[Was there anything that disappointed you?
So far it is bright, reduces heat and Watt number, and has no durability issues.
Tail lamps are easy to use when changing to LED bulbs, and are a great recommendation because they are inexpensive and have a large effect.
View detail
Fits: Others
Satisfied
It was difficult to find LEDs with integrated License Plate Light, and I hesitated because of the high price of this one (in my case, Quantity:2pc. (Set required) and safety safety parts, so I took the plunge and went with this one.
I was satisfied with the brightness, etc., but I had a hard time choosing from several Types when I purchased the product.
It would be great if there was a list of car models, years, etc., since they are so expensive and it would be a big problem if we make a mistake.
View detail
Fits: HONDA SUPER CUB 50, HONDA GYRO CANOPY, HONDA Universal, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50
Saving electricity(^^♪
full of electrical charges (Lol)
Grip heater
Fog Lamp
JupiterNavigation
USB power supply
Digital meter
Other.
Maybe we can save a little electricity. (^_^;)
View detail
Brightness with crispness
Used for KIJIMA's Lucas tail lamp.
When Brake is applied, it is firm and bright, which is very nice.
I am glad I bought it at a reasonable price.
View detail
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
Since it was the same as the original manufacturer's product, it was able to use in comfort. Since attachment is also only exchanged, it is easy.
Since it was the same as the original manufacturer's product, it was able to use in comfort.
Since attachment is also only exchanged, it is easy.
View detail
The brightness is just right.
Compared to other products, the price was lower and the manufacturing was better.
The brightness is sufficient and visibility is good.
View detail
Fits: その他
A little expensive.
There is almost no voltage drop even when Brake is applied while the car is stopped to charge the phone and use the Grip heater. The same situation with OEM bulbs was a few V drop, so the effect is very Large. The brightness is also sufficient.
It is a little expensive, so I give it ▲1 star.
Oh, and check the model number carefully when you order!
View detail
Fits: HARLEY-DAVIDSON Universal
Clearance
I bought this because the tail lamp on my TRX850 was not sticking out beautifully, so I modified it to a short one.
I bought two of them, and one of the Socket cylinders was a little dented, but there was no problem with lighting, so I installed it.
Probably not a problem, but visibility to others and durability are unknown.
View detail