Reviews
DAYTONA MeterFilm CBR600RR
The installation position is Exactly, high quality, and I am satisfied with it. View detail
Fits: HONDA LITTLE CUB, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB
Friendly Wiring relationship
Used for CUB.
The supplied Meter panel was not used.
Anyway, the Instruction Manual and structure related to Wiring are very kind. At first, I was working in a messy way, but I was impressed by the SMART design of the wiring, such as the Harness for taking out the rotation signal.
The instruction manual is well written at a level that anyone can install the product if they read it carefully, so even beginners should be able to install the product if they try their best.
View detail
Fits: HONDA GB250 CLUBMAN (GB250 CLUBMAN), HONDA GB250 CLUBMAN (GB250 CLUBMAN), HONDA GB250 CLUBMAN (GB250 CLUBMAN), HONDA GB250 CLUBMAN (GB250 CLUBMAN), HONDA GB250 CLUBMAN (GB250 CLUBMAN), HONDA GB250 CLUBMAN (GB250 CLUBMAN), HONDA GB250 CLUBMAN (GB250 CLUBMAN), HONDA GB250 CLUBMAN (GB250 CLUBMAN)
OEM Product suitability
I ordered NTB's Meter cable because I thought the cable was broken and the needle on the meter was not moving. I connected the Meter cable but of course the Meter needle did not move, so I had to look for a Meter gear. View detail
Fits: HONDA CB400 FOUR(Air cooled), HONDA CB400 FOUR(Air cooled), HONDA CB400 FOUR(Air cooled), HONDA CB400 FOUR(Air cooled)
I feel like you're right.
I feel like you're right.
can be done with a ponzu (Japanese sauce made of soy sauce and citrus juice)
View detail
Fits: HONDA CBR1000RR FIREBLADE, HONDA CBR600RR, HONDA CBR600RR
For Meter Protection
Purchased for Meter protection as per Title
It came with two sheets, AntiglareType and Super clearType, and I thought it would be nice to be able to choose the one I prefer.
Antiglare was selected for this project and Super clear was kept as a spare.
The accuracy is a little low and some parts are not fully covered, but it is acceptable. The view is not particularly different.
View detail
So bad
I purchased this product because my 30 year old KIJIMA product started to rust.
The shape is different and it doesn't fit well. I have a FOR JAPAN MODEL E3, but is there a difference in the shape of the meter depending on the year?
No year model designation in the description.
It says that it focuses on the beauty of plating, but I think it is an inexpensive Chinese product that will not shine as brightly as KIJIMA products even if it is polished to a poor plating base.
We decided to re-plating KIJIMA products.
We purchased only the Upper Cover, but I think you should check the shape of your meter before purchasing.
View detail
Fits: SUZUKI V-Strom 650, SUZUKI V-Strom 1000
Even if Size is past Limit….
The film is hard and fits in the MeterSize Limit. I managed to install the film, but after washing the car, the film started to float when I blew off the water droplets with a compressor.
I stuck it again, but I am not sure about its durability. Is the size still not right?
View detail
Good for those who think it's good.
I did this as the inside of the Meter was getting swollen, but if you like the OEM look (the old look), I would not do the Recommendation. It will look and feel new.
It is better to have the Double-sided Tape on the back from the beginning to avoid any hassle.
View detail
Fits: HONDA fusion, HONDA fusion, HONDA FUSION, HONDA FUSION, HONDA FUSION, HONDA FUSION
No more foggy display
Ive been wanting to replace my display for years now, i was skeptical about finding a replacement. I couldn't believe i found one on webike. The price was cheap i think i paid more for shipping. I bit the bullet and ordered one and wow in glad i did. Looks and operates just like the original.. it was my first order from webike. I will definitely order for them again View detail
Fits: YAMAHA XSR700, YAMAHA XSR700
Paris bag
We purchased this Bracket because the OEM Product was sticking out and felt like it was floating.
It is now in front and much better than NORMAL.
But the keys are a little Large weird!
View detail
Fits: BMW R 75/7, BMW R 60T, BMW R 60/7, BMW R 90S, BMW R 90/6, BMW R 75/6, BMW R 60/6, BMW R 100RT till 1990, BMW R 100S, BMW R 100CS, BMW R 100T, BMW R 100, BMW R 100/7, BMW R 80TS, BMW R 80TN, BMW R 80RT, BMW R 80N, BMW R 80/7S, BMW R 80, BMW R 80/7N
If it deteriorates, replace it!
[How is it used?
Used on BMW R100 Twin suspension.
How was your experience with it?
The rubber had deteriorated considerably and was falling apart, so we replaced it. The new rubber was taut and of reliable quality.
[Points to note]
If you can buy both, purchase quantity 2!
View detail
Fits: YAMAHA MT-07
Exclusive products are nice!
I purchased the Motorcycle right after I took delivery of it and put it on.
I was able to install it before the small scratches started, so I bought it later.
I felt it was a good product to have!
View detail
Required whenever you replace Sprocket.
I bought this Meter thinking it was strange because my fuel consumption was 45km/L when I set the Driven Sprocket to 16T.
I found a setting item for Sprocket tooth number and Tire circumference length, so I set them, and sure enough, it was 59km/L.
Large change was also useful and useful custom parts to know accurate information.
It is good to display the exact RPM digitally, but since it is not used for Race, it would be better to use an AnalogMeter for that, and display Odo and Trip at the same time in the display area for that, or make the clock display larger.
I used HandlebarBrace's Bracket to make it high mount.
View detail
Fit to Off car without Tachometer
I purchased this unit because I wanted to know the Engine RPM when I converted my WR to MOTARD. The installation required the connection to the Accessories power supply that supplies power when the key is turned on, the Pulse wire of the Engine before it enters the ECU, and the connection to the ECU. (I think it was the Orange line.) I wanted to add ETC at the same time, so I installed OEMY's Gear's Harness kit and got ACC from there. Harness and connectors are located in the space in front of the ECU under the seat. The meter is not bad, although the indicator is not so easy to see. The RPMs are now visible and I feel more secure in turning it all the way up. View detail
We were able to immeChain at a reasonable price!
I am very satisfied with the Plating, which gives it a luxurious feel (in my opinion) and Large. The impression has completely changed.
I read in the comments and the instruction manual that the ETC receiver in the Meter may not be able to receive the signal unless it is relocated, but some other sites said it was Large sturdy, so I installed it without relocating the receiver. In my case, the Gate opened and closed without trouble, so I am relieved.
View detail
Fits: SUZUKI Hayabusa
To prevent scratches
Like the Smartphone, I bought this to prevent scratches. I found it as difficult to apply as smoked film on a car. Of course it is effective, but I would like to know how to apply it easily and beautifully. View detail
It is a good item
[How is it used? It's been a month since I installed it on the Meter panel of my NINJAH2SXSE (2021 model).
Was the one you received as per Image? The size is perfect for the Meter screen. I was worried about damage to the screen since the Meter is an LCD panel, but I am now feeling more secure.
Was the installation difficult? It's easy. It is the same way as the film on a cell phone screen. A small amount of detergent was enclosed in the bottle to wet the adhesive surface during installation. I did not see any Instruction Manual. I diluted it and used it. I sprayed it on the adhesive surface and pushed out the water with the included spatula, which I rubbed lightly to avoid scratching the surface of the film. Moisture was absorbed with Tissue.
How was your experience with it? I have been using it for a month now and I have no problems. There are a few small bubbles left, but no problem in use.
[Accessories] A bottle containing a small amount of detergent and a spatula are included.
[Was there anything that disappointed you? Nothing in particular. It is just a Film, so the cosmetics are rather expensive (2 stars). The shape is perfect and even an amateur could apply it well, so I am satisfied (4 stars overall).
View detail
Fits: HONDA SUPER DIO SR, HONDA SUPER DIO XR, HONDA SUPER DIO ZX, HONDA LIVE DIO S, HONDA LIVE DIO ST, HONDA LIVE DIO SR, HONDA LIVE DIO ZX
Received
Thank you for your prompt response. View detail
Easy installation
This is a HONDAOEMOption that adds a gorgeous texture to the Indicator Lamp area of the Meter.
Installation is easy
Simply degrease and clean the mounting surface, peel off the backing paper of the Body's Double-sided Tape, and affix it.
Hairline-style finishes and understated Logo bring Accent to the view from the Owner.
I feel no discomfort and wish it had been included from the beginning.
View detail
Fits: HONDA MONKEY125, HONDA MONKEY125
Efficient and intuitive
It's a stylishly equipped tachometer that motorcycles don't have. When I open the product, there are two instruction manuals and this makes me confused. One is a universal manual and the other is a manual for Monkey125. If you can distinguish the two well, it's not difficult to install. View detail