Reviews
Looks good and easy for maintenance (nc42 suits)
I buy this because of the ease of maintenance and inspection of the front sprocket. Looks good and the lubricant can be easy for removal The orginal should remove the gear lever and always contains amount of excessive lubricant of the chain However, the sound of the chain would be higher than the original one View detail
a beautiful cow gear cover
Hello I've always been concerned about cleaning the cow gear But the pure cover was annoying to take apart This product has a clear view of the small gear, so it's advantageous to clean the small gear And it provides beauty at the same time It's aluminum, so it's light Recommend. Thank you. View detail
DAEG's footprint has been tightened.
DAEG's footprint has been tightened.
It's pretty cool, and the OVER Logo is nice and casual.
View detail
Fits: HONDA CB1300SUPER BOLDOR, HONDA CB1100, HONDA CB1300SUPERTouring, HONDA LD 97-03, HONDA CB1300 SF, HONDA X4, HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR
It changes the whole look and feel of the place.
The quality of the product is good and the installation was completed without any problems with the Instruction Manual.
Pretty cool.
View detail
Sprocket cover for ZrX1200 DAEG
Makes Parenthesis considerably better!
The Logo on the Over is also quite nice looking.
View detail
Superb Looking Sprocket Cover for the Grom
About quality and texture: I am happy with the quality of the sprocket cover from Driven. Made from aluminium with a low profile design makes the sprocket cover extremely light weight. About the feeling of use: This sprocket cover looks superb on the Grom, a huge improvement in everyway over the Honda sprocket cover. Products to buy together: A silver drive chain would also be desirable to purchase along side the sprocket cover to add even more appeal to this area on the Grom. Difficulty of installation: The process to install takes about 15 minutes, remove the two mounting fasteners from the Honda sprocket cover will allow it's removal and then use the two spacers and two fasteners from Driven to install their sprocket cover. Not difficult to do. Cost performance and comparison with other products: High costing but you are getting a beauitfully designed cover made from quality aluminium stock as compared to the plain looking and cast sprocket cover from Honda. About shipping and packaging: Sea frieght was my perferred method of shipping due to the lower cost but currently unavailable due to Japan Post. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: Available in a range of colour finishes to suit your Grom's styling. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS Cafe, KAWASAKI Z900RS, KAWASAKI Z900RS Cafe
BABYFACE (Sato Racing)
About quality and texture cnc aluminum alloy material About the use experience love this look Products purchased together frame plug Installation difficulty One person can complete the installation Cost-effectiveness and comparison with other products Good texture and reasonable price About shipping and packaging tight packaging Any concerns, cautions or advice when purchasing It is recommended to buy raised pedals together, the matching effect is better View detail
Good Looks, Good Protection
Way stronger than stock. I don't worry as much incase I bust a chain.Case saver looks solid and is an easy way to add some bling to the bike, while giving great protection. Well built. shipping is very fast, packaging is very nice. View detail
It's just a matter of looks.
Aluminum Diecast so you can see Oooh!" It's just self-satisfaction, but the slightest change makes me feel better, just like when a woman wears a new pair of Pierce shoes.
something a little "A sense of tinkering." 5 stars for the ability to produce
Minus one star for the price.
View detail
Aligned with the color of Chain.
I made it Gold to match the color of Chain.
I am satisfied with the change in appearance more than I expected.
View detail
Parenthesis OK
It was troublesome to remove the front Sprocket Cover and clean it every time when doing maintenance on the CRF.
So, I bought this Cover to improve the maintenance performance and parenthesis.
Simple cleaning is easier than before.
I was concerned about that because it is quite bare, but there was no problem at all.
View detail
Sprocket Cover from Driven
* About quality and texture, Made in the USA this sprocket cover is machined from aluminum and anodized in silver with the finishing touch of the Driven logo laser etching. * About the feeling of use, The addition of a silver cover on the black engine looks great and I really like the design of the Driven sprocket cover with it's open holes to expose the drive chain. * Products to buy together, Some silver timing and generator hole covers will add to the look, Driven also have these available in multi colour options to suit their sprocket covers. * Difficulty of installation, Installation is simply just removing the 2 bolts from the Honda OEM cover and fitting the Driven cover with it's included hardware. The process was completed in 10 minutes with no difficultly. * Cost performance and comparison with other products, There are much cheaper options from the likes of Tanaka Trading but I much prefer the design and colour options of the Driven sprocket cover. * About shipping and packaging, I am happy to wait 8 weeks on average for my parts to arrive in Sydney Australia via Webike's sea freight which comes with tracking and insurance so I know I'm covered in case something was to go wrong but with there outstanding bubble wrapping and boxing there have been no problems. * Any concerns, cautions, or advice when purchasing, Driven make quality products and you will not be disappointed in this sprocket cover. Use the product reviews to assist in making a decision on your purchase. View detail
It is a recommend with a parenthesis simply [ attachment ] and sufficient [ a design ].
It is a recommend with a parenthesis simply [ attachment ] and sufficient [ a design ]. View detail
Rear brake air Guide
The name of this item is Sprocket Cover, but the OEM part name is Rear brake Air Guide.
The function would be to cool the Rear brake.
I had to replace it because it was dirty and white and it didn't look good.
Front Fender was also changed to Carbon for better balance.
All that remains is to replace the Rear Fender.
The accuracy was poor for its high price, and installation required forceful hole alignment.
Also, the packaging was messy.
Washer is required to use the original Bolt as it is different thickness from OEM.
View detail
Installed on New Model GSX1300R HAYABUSA
Honestly, it's the look! But now I can clean it from the crevices.
It is a pity that Anodized has a very strong Orange color and WoodStock has a different color, but as a whole, it is a cohesive unit.
The work is done by simply removing the screws from the LeftUnder Cover and Side cowlCenter and lifting the nails.
View detail
Texture Large width up from NORMAL!
Prices are expensive, but Material:The texture is up from NORMAL with Carbon.
My Initial ModelCB is Material:The plastic cover was a reduction in cost, but now it looks much more luxurious.
The weight is not much different, it is light, and there is nothing wrong with it as long as you can ignore the price.
View detail
Firm texture
[How is it used?
Touring (On road, Gentian)
Was the one you received as per Image?
Street Image
Was the installation difficult?
Very simple, requires an 8mm Socket.
How was your experience with it?
Good with no interference
[Included Parts:were they on?
no problem
[Was there anything that disappointed you?
None
View detail
Fits: HONDA CB1100, HONDA X4, HONDA LD 97-03, HONDA CB1300SUPERTouring, HONDA CB1300 SF, HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR
It's neither good nor bad
[How is it used?
No particular problem in use, but needs to be cleaned regularly because of grease etc. on the chain.
Was the one you received as per Image?
Yes
Was the installation difficult?
Easy
How was your experience with it?
No problem
[Included Parts:were they on?
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
It was a good product that was well thought out, even down to the day-to-day care.
I replaced the Sprocket Cover that I had damaged due to my sad carelessness during a previous job. I chose this product simply because it was the least expensive among similar products.
Parts:POSH FaithSprocket Cover
When we checked the actual arrival of the product, we found that a solid Dust cover was also attached, which was a Large change pleasant miscalculation because it prevents the vehicle body from being soiled by the oil that splashes from the Sprocket.
The only thing I don't understand is that the shift pattern is not indicated, and the Instruction Manual states that the car will not pass inspection as is, but the original OEM Product also does not indicate the shift pattern. Does this mean that the OEM Product is being sold by the Manufacturer in a condition that will not pass vehicle inspections?
I don't know the details of the situation, but...
It did not appear to be listed anywhere.
I don't have enough small money to ask a dealer to inspect my car, and I don't want it to be a hassle later on, so I modified it a little to indicate the shift pattern.
The processing content of the notation is just pasting the letters "1N23456" with METAL's in lettering and pouring the transparent hardening resin from the top.
I will also include a photo for reference.
View detail
Very nice and stylish
Is very nice and very clean look, the material design is AWESOME! after installation. Is very easy to maintain your chain which doesn't have alot of screws to access to the chain or lube. View detail