Reviews
Luxury in a cheap Bolt
If you put this on, even a cheap Bolt will look luxurious If you care about the appearance, this is the recommendation for you
I was motivated by the crappy Bolt that came with the Over's exhaust system This was introduced
View detail
Fits: KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000 (air-cooled), KAWASAKI Z900 (KZ900), KAWASAKI Z750 (air-cooled), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
You might need it if you take out the kick pedal
Because I purchased the Rear Sets which cannot be attached to the Kick pedal, I installed it To protect the Shaft from rust, Silicon grease is applied to it View detail
Durability is difficult
I bought a red one for a little dress-up, and it's very easy to put it on the Bolt It is
It's shiningly good and the color is very good, I think it looks very good, I'm trying to prevent it from deteriorating as much as possible When I wiped it with Plexus, the plating on the corners peeled off a bit
I felt it wasn't as durable as I thought it was going to be, and the price is so low that you have to replace it every time it deteriorates It is
And I want the number of entries to be even
View detail
Almost satisfied
I installed it as a one point Accent around the Handlebar, good color and quality The appearance has improved in its own way and I am satisfied with it
However, I still think this gold amount is a bit high for 4 pieces, but at least make it about 700 yen I think it will be easier to buy if you give me the
View detail
Cospa good
I've been using it for about two years now, but the fading of AnodizedNOTHING?
For this Price, this quality is definitely a buy
View detail
Damn it!
I bought it for the Mirror Hole Cover and it is much smaller than I thought it would be
When I first saw it, I thought it was either the diameter of the hole or the Bolt cap, but it's smaller than the Image is
It went in the screw hole of the M10 tightly, but the spit? I have no complaints if the outer diameter of the
It's returned, so it doesn't look like it was left out at all
View detail
Even the Small grain has a strong claim to fame
Changed the bolt of Exhaust Bracket and bought a cover because it is not good taste as it is I did
The colors of Anodized are beautiful and there are 13 colors to choose from
POSH sells two different Cap Bolt Covers, but I personally think that I think NASA Type is better for Parenthesis
I used Rubber-based adhesive because I mounted it on the sides
I've driven about 60km after installation and the fixation seems to be fine
It's not cheap as it costs 1,296 yen for four Small Parts, but Dress-up It is certainly effective
View detail
Bolt Cover 12mm
this item is well made and all but the gold color is like more orange than gold, however i like how it looks in my bike. regards! View detail
![PREMIUM ZONE Dress Up Bolt Cap [for M6 Bolt]](https://img.webike-cdn.net/catalogue/images/20771/92095_TS.jpg)
Appearance-oriented type
The fine feeling of texture affects the overall atmosphere Large.
Bolt head bare in places that are noticeable, such as around Handlebar, rust inside
It is something you want to do because it seems quite poor to float.
There are things that are cheaper as borrowers, but there are plenty of designs
This item feels better than I think.
Gorgeous color is Custom feeling, something plain is texture up and you use it properly
It will be good.
It is a Type that pushes in not a plug-in but also a plug-in, so reuse
Easy to do is also good.
View detail
3 years use No deterioration
I have purchased it for 3 years.. There is no deterioration, it becomes easy to stretch out and etc etc etc etc etc. not at all. Iron's Blackout is an indispensable Items. View detail
If you can choose some Design face White.
With complete Bolt On, it can be installed in 20 seconds ??. Just a few more if you can choose the same color as Design, it will be more determined, View detail
Fits: HARLEY-DAVIDSON Sportster Family, HARLEY-DAVIDSON softail family, HARLEY-DAVIDSON dynamo delta, HARLEY-DAVIDSON Touring Family
The power got increased!
Head bolt 's rust cared and I came across this item. Silver's color is incompatible with the satin engine - There was no sarcophagus and it was frugal but its power grew stronger and Power came out to the Engine.
Only one, Included Parts : The Allen key is not so good in accuracy, so you should trust it and do not fasten it!
View detail
Very easy to install
Lost one Toledo Bolt cap
I was searching for a product that is hard to deteriorate, and it arrived..
OEM Product is also about 200 yen so it is not so expensive.
It is easy to install, so I worry a little whether it can not come off
Color selected Titanium. I think I'm matched cleanly.
View detail
Better TopIndicator!
- Decision of purchase
My favorite car Grom uses a lot of Gold for One point. Before installing Dirut JapanOPTopIndicator, I thought that OEMCap Bolt Cover was unsatisfactory and imageed MASACap Bolt Cover M8 Gold. If I did not install TopIndicator I think that I did not purchase it.
- Impression actually used
It is not a functionally improving part but improves self-satisfaction. In addition, the surroundings of Handlebar become gorgeous, and will complement OPTopIndicator. It is full of Custom feeling as it looks.
- Mounting difficulty
Easy to install by anyone. Just put it out of the package and snap it in. You can do it even if you are a son of a middle school student at home!
- Others
This time, I put a week's time to wear. For some reason - - - OPTopIndicator and Zeta : Exchange Stem Nut at the same time - I am working with installation, removing the Handlebar. Before removing the Handlebar, I worked with marking with Masking tape so that the previous Handle position can be understood, but for a week to confirm the Gap of the Handle position, confirm the Handle position while riding is. If you install Cap Bolt Cover without confirmation, it will be removed every adjustment. I thought that I could not get it. By the way, OEMCap Bolt Cover - - - For theft prevention, I used it for Cap bolt of Rear Sets!
View detail
Cap bolt cover
Small staff,but very useful. Not plastic,but made aluminium. Protect againts twisted dust and mud. This item shows it very much. View detail
Focus on appearance
It is in use with the company NASA TypeHolder used for Number.
We are using similar products of other companies,
There is no thing that installation precision is high, abnormally installed is hard or loose.
Total likes it,
The outer shape is slightly small, so it is only a few but the part where Bolt's head is not hidden,
After all it is high w
View detail
It is only looks
I closed the M6Screw hole that I do not use.
Garbageetc. Although it can prevent invasion, since it is Pura Cap, since water enters, water gathers inside when it gets wet, there is a possibility that it becomes easy to rust on the contrary.
There is not much need, but please to prevent Garbage clogging.
View detail
Aluminum cut out
M6 over HexBolt Aluminum cover.
10 pcs. Set has this price affordable.
Color has Black, Gold, Green Light, Red, Blue, Orange.
View detail
M6 - It is purchase following M8.
Bolt 's head around Handlebar and Number - Plate somewhat concerns. (not cool?)
I have been looking forward to the Web that I'm searching for while having fun with Net, and found this part.
Attachment after purchase Instruction Manual includes (vertical) When installing it, consider the bonding method - - - Although it was stated as it is, it is installed as it is and it is in use without falling out even if it runs at 100 km / h. (It is self-responsibility - - - ).
If the price is a bit cheaper, I'd like to install it in various places, but it is the only dissatisfaction that around 4000 for around 1000 yen.
View detail
In places you do not want to make it stand out...
A fashionable Bolt cover of DAYTONA and POSH is also good, but I like this kind of simple design in places where you do not want to make Cap bolt stand out.
I purchased the same Cap Bolt Cover last time, but I bought it as Stock.
Which Manufacturer should cost half price, or about 30%....
View detail