Reviews
Fits: HONDA Forza(MF10), SUZUKI ADDRESSV125, HONDA FORZA Z ABS, HONDA FORZA Z, HONDA FORZA Z, HONDA FORZA Z, HONDA PCX150, HONDA PCX125, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA FORZA Z ABS, HONDA FORZA Z ABS, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
A little bit to Mischief!
What made you decide to buy?
My 6R I installed Active's Fender Eliminator Kit last year. The Fender Eliminator Kit is designed to meet the new standards for the first year, so the Number angle is a little Large…Number angle is a little Mischief style when you want to DAYTONA.:I came across Slant License Bracket. (Lol) This Slant License Bracket is applicable to PCX, FORZA, and Address. 125. However, the images and impressions posted by users who have installed the product on other models were very helpful and led me to purchase the product.
How was your experience with it?
As expected. The number from the back is not at an angle where you can't see it from the back like the Mischief people, but I think it fits at an angle where you can see it from the back as well. I think it's OK for me, but … that's your own responsibility.
If you are considering purchasing the Slant License Bracket, it has an angle of about 25 degrees. Fender shape to be installed (OEM or Other Brand Product) I think the angle will change with Installation is at your own risk.
[Others]
The number attachment pitch is 12, which can be attached to 125cc to liter machines. The body is compact but solid, and bolt is welded to fix Fender and Number. The following is an example. This welded bolt is about 13-14mm on the Fender side and about 1mm on the Number side. Please be careful when installing the product. The difference in length can be seen visually, and a cap nut and washer are attached to the number side when the unit is packaged.
From here, Active installed in 6R.:If you have installed the Slant License Bracket, you can install the License Plate Light and Number with Limit.:The installation had to be done while successfully crossing the License Plate Light before setting. Also, with the NumberCover in place, it was thicker and I felt that the nut was not tight enough, so I removed the NumberCover and installed it this time. I felt that the parenthesis was more Refreshing and better without the NumberCover. (Lol)
I think it is necessary to check to make sure that it does not come off due to driving vibration when it is last driven. If you drop the number without knowing it when you drive a long distance or drive at high speed, … it is necessary to check it. In my case, the Fender side is tightened with a nut with a loosening stop.
View detail
good quality
The License Plate hits the Tire, so I installed this.
It looks expensive at first glance, so I could have made it myself by bending some Bracket, but it is rather thick and looks good. If you want to refreshing at this price, it would be quicker to buy this one.
View detail
Fits: HONDA Forza(MF10), SUZUKI ADDRESSV125, HONDA FORZA Z ABS, HONDA FORZA Z, HONDA FORZA Z, HONDA FORZA Z, HONDA PCX150, HONDA PCX125, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA FORZA Z ABS, HONDA FORZA Z ABS, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
sturdy
It is very strong, but although it is painted, it rusts easily. I also bought a Plate Holder because if you attach a number to this bracket alone, the number will easily bend if it gets caught or hit by something. View detail
Fits: HONDA DREAM50, HONDA ZOOMER, HONDA Byte, HONDA GORILLA, HONDA MONKEY, HONDA APE
That's great, Takekawa.
The material and mounting angle were exactly as I wanted.
Easy to install, just fasten with Screw.
View detail
Fits: YAMAHA MT-07, YAMAHA MT-07
What? I can't find a Number.
I bought it to do SCRAMBLERCustom.
Large satisfied with the super martial finish.
You will need to modify the harness, but there are tail and blinker harnesses for Yamaha that are sold separately, so you can buy them if you don't want to bother. I'm a bullet terminal craftsman, so I replaced it steadily.
The quality of the Lens and the amount of light is fine, but I think the color of the Wiring of the Tail lens is reversed. The Tail was always bright and didn't change when I stepped on the Brake, so I switched the Wiring and it worked correctly.
Well, this kind of thing is common in foreign parts, so you need to check it all the time.
The blinker is also LED Blinker from the same manufacturer.
So, here's the problem with Large.
No Number is attached.
The position of the holes is completely different.
An EU standard?
So it needs to be processed.
I bought Bracket and Bolt nut from Home center and installed them.
(Maybe this is the kind of thing I bought myself, it was iron in Black)
https://www.komeri.com/disp/CKmSfGoodsPageMain_001.jsp?GOODS_NO=41325&dispNo=001022007
If you raise the mounting position, the Blinker will be hidden, so be careful there too.
If you can't do this, buy a domestic kit that you can rely on.
View detail
Fits: HONDA Forza(MF10), SUZUKI ADDRESSV125, HONDA FORZA Z ABS, HONDA FORZA Z, HONDA FORZA Z, HONDA FORZA Z, HONDA PCX150, HONDA PCX125, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA FORZA Z ABS, HONDA FORZA Z ABS, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
Easy angle change
[How is it used?
I have a YZF-R1 with a Fender Eliminator, but I was concerned about the angle and bought this product that suddenly caught my eye.
It is not in the compatible car models, but of course the License Plate is the same size, so there was no problem about the installation.
Was the one you received as per Image?
It's a DAYTONA product, so the quality is solid.
Nut for installation is also included and helpful.
How was your experience with it?
It only takes a few minutes to install.
I have a DAYTONA Dr-Recorder, but I was able to use it by just replacing it without having to relocate it.
When I installed it, the angle of the Number itself was exactly what I was expecting, and I am satisfied with the product.
But this is completely a matter of personal taste now. "There's something not quite right about it. I'm worried that I'm going to get a lot of laughs.
It is very difficult to understand the difference between these parts without installing them on the actual car.
If I don't feel any discomfort after using it for a while, I'll leave it as is.
How did it compare to other products?
I compared it with a very small bracket from a certain large hand ShoppingSite.
I chose this product because I could only see a future where it would obviously be Garbage and I could expect it to be of good quality.
【Review】
You can change the angle of the License Plate by DIY, but it is not possible to change the Quantity:Pair (for Left and Right) If you use Universal Product, you may get Rose Tsuki. (And at a reasonable price.) I'm grateful for the solution.
If you want to use it for other car models, you should check if it is large enough to be legal.
View detail
Firmly.
The two sides of the right angle are about 2.5cm each, and the License Plate mounting angle is about 60 degrees.
It seems to be a special product for some car models, but in order to use it for nmax, I drilled a hole for fixing with an electric drill.
View detail
Fits: HONDA DREAM50, HONDA ZOOMER, HONDA Byte, HONDA GORILLA, HONDA MONKEY, HONDA APE
TakegawaLicense Plate Bracket
I am very satisfied with the material and quality of this product.
However, the goodness of the goods cannot be conveyed because it is all hidden by the License Plate.
The angle of the License Plate is also finished elegantly.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Like SR.
I moved the Blinker to the Tail and lost the Reflector, so I relocated it. I bought a Nut that fits the size of the OEM Reflector at Home center and installed it because the diameter of the Nut did not fit. The bracket of the reflector is visible because it interferes with the mudguard, but I am very satisfied with the result. View detail
Fender Eliminator of Off
It's a standard product for Off-road motorcycles to be Fender Eliminator.
I have been using it a lot for a long time, but I recommend you to buy both the License Plate Bracket and the License Plate Holder at the same time.
If you don't have a Holder, the License Plate will be bent at once.
Quantity:I think it's safe to say that it's something you buy in a set.
I'm not worried about cracks etc. as this Bracket is vibration proofed.
View detail
Clean and strong!
I modified and installed it on BALIUS. This is my second time to buy it after I installed it on the previous BALIUS.
I think it's a little pricey for a bracket, but I think your opinion will change once you see it in person.
It's so thick that it's impossible to bend it by hand and difficult to bend it with Pliers. It is also difficult to bend with Pliers. (Perhaps the strength of the small measure.) I installed a Number for medium-sized and larger vehicles and used it, but it was neither damaged nor deformed for more than 100,000 kilometers.
It has a uniform, darker Black Anodized finish with GCraft stamped on it for a great sense of ownership.
View detail
Fits: YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S
A little RearMakeover!
Purchased in conjunction with the relocation of NumberSlate to a reflector position above the existing position It was
The reflector part is processed vertically in the middle of a slanted rear fender, so this product is not I did some small work on the Rear Fender side as it is, and bought the Reflector that I bought at the same time I installed it with the kit
The verticality of the OEM was undeniable, but I personally felt that the Refreshing was more cohesive We are self-satisfied
View detail
Fits: HONDA DREAM50, HONDA ZOOMER, HONDA Byte, HONDA GORILLA, HONDA MONKEY, HONDA APE
Takekawa's workmanship is good!
Just take the numbers off and put them on!
It gives you a little bit of an angle so you can easily see the Number
The stuff is pretty good, and if it's about $2,000, it's a buy
But! I can't see it when I put Number on it
That's the problem
View detail
Fits: YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S
Impressions!
I wanted to change the look of the standard spec I bought it with the Reflector kit StylishType
The company has an exclusive version for each model of car, but the standard spec. reflector is removed I wanted to install it, so I fitted it, and I wanted another 10 degrees of slope I used rubber plates to increase the slope of the addition, but this was a poorly thought out addition We are honestly satisfied
View detail
Fits: HONDA CB350, HONDA CB400FOUR (air-cooled), HONDA CB400FOUR (air-cooled), HONDA CB400FOUR (air-cooled), HONDA CB400FOUR (air-cooled)
Plating License Plate Bracket
I ordered Plating License Plate Bracket that used for HONDA CB350 F 72-74 because i like it very much, I am very pleased that it looks sturdy and strong View detail
Fits: HONDA Forza(MF10), SUZUKI ADDRESSV125, HONDA FORZA Z ABS, HONDA FORZA Z, HONDA FORZA Z, HONDA FORZA Z, HONDA PCX150, HONDA PCX125, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA FORZA Z ABS, HONDA FORZA Z ABS, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
Can not be installed
I thought about installing it on Fender Eliminator on another vehicle but I could not install it without clearance with License Plate Light
View detail
Fits: YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S
Rise moderately
Although it is the order to fix Number to Bracket after attaching Bracket to the car body formally
Level that it is very painful for the thick fingers because of the narrow gap.
Even my own finger was much Large strange.
However, once installed it will be at a moderate bounce angle
Not feeling not too much Brown (Personal opinion) I wonder if it is OK.
View detail
Installation is quite Large strange, looks satisfying ○
I installed it myself. The model is TMAX 530 DX for 17 years.
We started assembling in advance by looking at Manual.
- OEMFender's Screw is Screwwith Lock. Cross Screw is easy to lick. (1 pc licked)
- Removing Blinker, Rubber is hard to come off hard and it is Large strange.
As you scratch it scratches, it got much easier if you sprayed Silicon spray.
- It is quite easy to put Blinker in the new way
I removed Blinker Bracket from FenderBody and installed it, but when I attach it to Body
Hexagonal Wrench Screw can not be tightened without screwing in → w → Ball head somehow tightened.
- Bullet Terminal of License Plate Light is loose fitting as it is Included Parts : Although exchange is good,
I need the Crimp Tool (The LEDs have disappeared after trial running as it is)
I crash a little Female's outer diameter first aid measures. I plan to start over when I buy a tool.
- Attaching Number base will hit LED Lamp, so it was necessary to process it in a U shape.
And amateurs were Large strange work, but the appearance is perfectly satisfying
View detail
I like SIDE's Logo
Y's Gear's Fender Eliminator Kit. SIDE written MT-10 and Parenthesis nice.
Bandetc shape. Easy to hang, convenient to use.
Installation is somewhat troublesome, but Level is somehow managed with the attached Instruction Manual.
Porting Blinker and porting KeyholeCover was the hardest fight.
Blinker was Rubber packing? Formula, it was hard after coming off the fixed plate.
To avoid hurting the Rubber, it was easy to do it while bending little by little with a slotted screwdriver etc..
KeyholeCover is irritated because it is a detailed work when charging Spring (Lol)
Processing may be necessary when using with Number plate cover.
I had no choice but to process it.
View detail
Fits: YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S
Used with ZrX1200R
Motorcycle I bought in second hand was Fender Eliminator but because it was removed
License Plate Bracket is required and purchased here.
I will add Exactly to NORMAL's Fender.
I only have a little bit of angle to the ground. Compared to the commercially available Fender Eliminator, it is nearly at right angles at all.
I think that it is not necessarily flashy.
View detail